Oxford LOWPRO Series User manual

LOWPRO
TRENCH COVER
INSTALLATION
GUIDE

INSTALLATION INSTRUCTIONS
1. Place the cover centrally over the damaged area.
3. Check the surrounding surface and the areas where the
rubber edges will be resting.
5. When installing 2 covers next to each other, ensure the
covers are touching to minimise the gap between them.
7. Store on a pallet. Find this label on Oxford LowPro Trench Covers.
Scan the QR code for product installation guides.
2. A driveway board, such as LowPro 15/10, is a 2 person lift
with one at either end.
4. If area is uneven secure the cover via the corner holes. Use
an appropriate fixing pin dependent upon the ground surface.
6. Lift by hand. Do not use tools to aid lifting.
Oxford Plastics Systems Ltd | Unit T2 | Enstone Business Park | Enstone | Chipping Norton | Oxfordshire | OX7 4NP | UK
Tel: [phone] | Email: [email protected] | www.oxfordplastics.com
[phone]
[email protected]
www.oxfordplastics.com
www.oxfordplasticsusa.com
Scan QR
code for
installation
guide:
Installation guides also available at www.oxfordplastics.com
08/2017 - UK