OZCO 210 User manual

OZCO Project #210
- Wood Post &
Beam Pavilion -
Free Standing
1
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing

2848
112.13
Center to Center 2205
86.81
3353
132.00
3045
119.88
2456
96.69
3596
141.56
3658
144.00
2756
108.50
Center to Center
3521
138.61
3048
120.00
3371
132.71
Overview 2
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing

10
6
3
4
16
7
13
14
17
5 811
1
12
2
15
9
Bill of Material 3
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing
ITEM
NO. QTY. PART NUMBER DESCRIPTION
1 4 56609 8x8 Post Base (8x8-PB-
LS)
2 2 56636 Post to Beam Bolt Offset
(P2B-BO-LS)
3 4 56612 "T" Tie Plate (TTP)
1.5 56611 Truss Accent (TA-LS)
0.08 56625 OWT Timber Screw 1-
3/4"
4 4.2 56618 4" Standard Rafter Clip
(RC-LS-4)
5 2 56636 Post to Beam Bolt Offset
(P2B-BO-LS)
6 4 56619 Truss Base Fan 8:12
2.5 56611 Truss Accent (TA-LS)
0.08 56625 OWT Timber Screw 1-
3/4"
7 8 56651 OWT Timber Bolt 8-10"
8156622 1-1/4" Hammered
Dome Cap Nut
0.04 56625 OWT Timber Screw 1-
3/4"
928
1x6 RWD
Board 1x6x132.00
10 1 2x8 RWD
Board 2x8x144.00
11 3 8x8 RWD
Post 8x8x96.00
12 1 8x8 RWD
Post 8x8x96.00
13 6 4x6 RWD
Board 4x6x168.00
14 10 4x6 RWD
Board 4x6x168.00
15 2 4x10 RWD
Board 4x10x144.00
16 2 4x10 RWD
Board 4x10x112.25
17 1 4x10 RWD
Board 4x10x100.50

56625
56619 56622
56612
56611 56651
56636
56618
56609
OZCO 4
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing

Laredo Sunset
vs.
Ironwood
OZCO Project #210 - Wood Post & Beam
Pavilion - Free Standing 5
V2.00 - Installation Instructions, Specifications and Project Plans are effective May 1, 2015 and reflects information that available
as of April 10, 2014. This information is updated periodically and should not be relied upon after October 15, 2016. Please visit
www.OZCOBP.com to get current information.
2 great styles
same functionality
choose your connection lifestyle
both styles available for most products
Ironwood
(517XX series) Laredo Sunset
(566XX series)

Suggested Tools
(others may be required)
6
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing

4x10 RWD Board
Bar
2553
100.50
1 X 45°
Cutlist1 7
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing
8x8 RWD Post
2 dato cuts
2438
96.00
beam width
51
2.00 typ
2 sides
51
2.00

4X6 RWD Board
King Post
940
37.00
48
1.88
56°
56°
4X6x12 RWD Board;
Web
751
29.56 56°
34°
20
.80
30
1.19
Cutlist2 8
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing

60
2.35
56°
4X6 RWDBoard
Rafter
2105
82.87
195
7.66
Cutlist3 9
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing
56°
56°

4x10 RWD Board
Beam
[3658]
144"
125
4.94 X 45°
2x8 RWD Board
Top Beam
[3658]
144"
100
3.94 X 45°
Cutlist4 10
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing

3963
156.03
3963
156.03
2848
112.13
2756
108.50
Locate desired
center of structure
if site is not level,
see Ozco Site Leveling instruction
site plan 11
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing

Tool Required
3/8" Driver
(HCN) provided
(OWT Timber Screw)
provided
step 1 12
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing

Tool Required
3/8" Driver
(HCN) provided
(OWT Timber Screw)
provided
step 2 13
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing
flush
width
of beam

flush
Tool Required
3/8" Driver
(HCN) provided
(OWT Timber Screw)
provided
step 3 14
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing

= =
Tool Required
3/8" Driver
(HCN) provided
(OWT Timber Screw)
provided
step 4 15
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing

rafter
web
king post
C
L
159
140
6.25
5.50
step 5 Truss Overview V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
OZCO Project #210 - Wood Post & Beam
Pavilion - Free Standing 16

line up with
centerline of
beam
C
L
step 6 17
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing
king post
Tool Required
3/8" Driver
(HCN) provided
(OWT Timber Screw)
provided

Rafter
1-7/8 to 2"
use scrap wood to set gap
Tool Required
3/8" Driver
(HCN) provided
(OWT Timber Screw)
provided
step 7 18
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing

step 8 19
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing
Web
Tool Required
3/8" Driver
(HCN) provided
(OWT Timber Screw)
provided

repeat Truss on opposite end
repeat connectors on inside
of Pavilion (both ends)
step 9 V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
OZCO Project #210 - Wood Post & Beam
Pavilion - Free Standing 20