Ozobot Bit User manual
You will need:
Ozobot Bit
Tablet or Computer
To program: To learn and play:
To get help: To share:
• Go to ozoblockly.com on your
computer or tablet.
• In the OzoBlockly Editor, choose a
mode and start to drag and drop
blocks.
• Load your program onto Ozobot.
(See instructions below)
• Play the OzoBlockly games
(games.ozoblockly.com)
• Check out the examples and
challenges in the right pane of the
OzoBlockly editor.
• Go to Ozobot’s STREAM education
website (ozobot.com/learnzone) to
download lessons, activities and
other instructional materials.
reference guide in the right pane of
the OzoBlockly editor.
• See calibration and loading help by
pressing the “Help” button in the
lower left of the opened load tab.
• In the OzoBlockly editor, save your
program using the save icon at the
then share with friends.
• Share with us by sending your
Click “Help” button in editor for complete instructions
To load and run:
X
1 2
3 4
Press “Load Ozobot” and the load tab will
come up from the bottom of the screen
Load program
to Ozobot.
Run program by double
pressing Ozobot’s
on/off button.
Note: If you are using a printed or drawn map, be sure to
calibrate Ozobot on the paper before running program.
Calibrate Ozobot
to the screen
Load Ozobot
Load
Blockly
Ozo
Getting Started
Too Thin! Too Thick! Inconsistent!
Too Sharp! Just Right Just Right
Tips: Drawing Lines
Just Right Too Close! Just Right
1
Hold down the power button on
Ozobot for 2 seconds until the
LED light turns white.
2
Quickly Place Ozobot in the middle of
the black calibration dot.
3
X
Ozobot will move forward and blink green,
which means it has successfully calibrated.
Start over if Ozobot blinks red.
Ozobot Tips
Tips: Calibration
Use this black dot to calibrate.
Tips: General
Tips: Drawing Codes Tips: OzoDraw
Codes on
black lines
All other codes need
black line before and after
2 color codes need
to be at line end
White
spaces
Codes on
colored lines
Too dark
Overlapping
colors
Different
sizes
No codes on
corners!
Keep codes on straight
lines away from corners
Too close! Place codes away
from intersections
Static Codes
Tap to
toggle!
Flash Codes
Flash Codes
will work on
colored lines
To delete code,
tap and drag
code off screen
Not aligned
to path
Two-nger
touch to
rotate
Before playing on a tablet or
smartphone, you need to calibrate to
the digital screen. Follow the calibration
instructions in the “Ozobot Tuneup”
section of our apps.
Ozobot Tips
Other Ozobot Robotics manuals
