OZTI OBA 14018 User manual

BANQUET TROLLEYS (ELECTRICAL – INDUSTRIAL TYPE)
USER’S MANUAL
1/13
MANUFACTURER : OZTIRYAKILER MADENI ESYA SAN. VE TIC A.S.
PRODUCTION SITE : Cumhuriyet Mahallesi Hadımköy Yolu Cad. No :8 Büyükçekmece
İstanbul / TURKEY Phone : [phone] (8 Hat-Lines) Fax : [phone]
Our website: www.oztiryakiler.com.tr E-mail: [e-mail]
OBA 14018 OBA 70182 OBA 70130
OBAC 14018 OBAC 70182
OBA 70182 MD

TABLE OF CONTENTS
PAGE NR. TOPICS
1COVER PAGE
2TABLE OF CONTENTS
3INTRODUCTION
4TECHNICAL DATA
5ELECTRICAL CIRCUIT DIAGRAM
6WARNING SIGNS
7SAFETY DETAILS
8TRANSPORTING, MOVING AND INSTALLATION
9INTRODUCTION OF THE APPLIANCES
10 CONTROL BOARDS, OPERATION OF THE DEVICE (1)
11 OPERATION OF THE DEVICE (2)
12 CLEAN-UP AND MAINTENANCE
13 TERMS OF GUARANTEE
2/13
CAUTION
This device should only be used in facilities where relevant
standards, laws and safety requirements are complied with

INTRODUCTION
If you are confused or you don’t have enough information
please get in touch with authorized service by phone.
Dear User,
Thank you for purchasing our device and for your reliance upon our company.
Our devices have been used within our customers kitchen, your kitchen in 100
countries. Our devices are produced in compliance with international standards.
Important notice: Please read or ensure that the users read this user’s manual in
order to achieve the desired performance in line with your expectations and to
use your device for long years. Please take the warnings mentioned above into
consideration before calling for service...
3/13
Please read and ensure that your operation personnel also reads this
user’s manual carefully before installing and using the device. If the
device is operated without reading the user’s manual, the device will not
be covered by the guarantee.
The manual containing information about installation, usage and
maintenance of our product you purchased should be read carefully.
Please ensure that power supply connections to the device are already
installed by qualified personnel according to local legislation, before our
authorized service personnel arrives for the installation of the device.
Please keep in mind that, if the service personnel is delayed
at your site, related expenses and delay costs will be charged to
you on hourly basis.
We hope that you will get the best performance from our product…

4/13
YOUR DEVICE'S TYPE OBA 14018
OBAC 14018
OBA 70182
OBA 70182 MD
(FERMENTATION)
OBAC 70182
OBA 70130
OBA 70130
MAIN DIMENSIONS (mm) 1517X910X1816 790X910X1816 827X910X1132
TOTAL ELECTRIC POWER (kW) 222
ELECTRIC POWER SUPPLY 220 –240 V AC NPE~ /
50-60 Hz 220 –240 V AC NPE~ / 50-60 Hz 220 –240 V AC NPE~ / 50-60 Hz
THERMOSTAT (°C) 50-80 50-80 50-80
CAPACITY 22 x GN 2/1-100 11 x GN 2/1-100 5 x GN 2/1-100
SUPPLY CABLE 3x1,5 3x1,5 3x1,5
MAXIMUM SLOPE 5° 5° 5°
CLASS 111
PROTECTION CLASS IP 21 IP 21 IP 21
WEIGTH (Kg.) 220 105 73
TECHNICAL DATA

ELECTRICAL CIRCUIT DIAGRAM(BANQUET TROLLEY)
5/13

WARNING SIGNS
POWER NETWORK GROUNDING
PE
GROUNDING
OVERHEAT
SUPPLY CONNECTION: MONOPHASE
VOLTAGE 220-240 V
GROUNDED
FREQUENCY : 50-60 Hz
POWER
6/13

SAFETY DETAILS
7/13
Any kind of flammable solid and liquid material (cloths, alcohol and
derivatives, petrochemical products, wooden and plastic materials, cutting
blocks, curtains etc.) should never be held near the device.
Never leave the device under direct sunlight. It should be located at
least 40 cm. away from heat sources like ovens, radiators and heaters.
Use can use this device simultaneously together with
other products of ours.
This device should be installed in line with effective regulations and only
be operated in well ventilated places. Please refer to the instructions
before installing and operating the device.
This device is designed for industrial use and should only be
operated by personnel trained on the device.
In case of fire or flame in the area where the device is operated, act without
panic, close gas valves (if any),
turn off power switches and use a fire extinguisher.
Never use water to extinguish the fire.
The device should not be handled by anyone else except for the
manufacturer or authorized service..

TRANSPORTING, MOVING AND INSTALLATION
CHANGING THE LOCATION;
Machines installed by an authorized service CANNOT BE
MOVED ELSEWHERE, ITS POWER SUPPLY CABLES
CANNOT BE EXTENDED OR REPLACED except by
an authorized service.
8/13
Heated unıts are be delivered as a standard in wooden cases, reinforced by EPS block,
wrapped with stretch film and air bubble protective packing, and wrapped over again with a
second layer of stretch film
The device may be moved with manpower.
Do not hit or drop the device when moving.
If this device located near to any wall, separation, kitchen furniture,
decorative coating etc. the distance in between should be 20 cm. and if those
are coated with fireproof heat insulating material, the distance should be 5 cm.
It is strong recommended that fire safety protection instructions are observed.
Remove stretch film on the device before installing the device.
After the device is moved to the location where it will be operated, rollers should be set to lock
position. In this way sliding of the trolley is prevented.
Power supply connection of the device should be checked by an eligible electrician, and it
should be connected to a fuse at a maximum height of 170 cm.
Power supply connection should be made using a 30 mA current leakage fuse as a protection
against current leakage danger.
Power installation of the plugs to be used should be grounded by connecting it to a grounding
bar at the nearest panel.

rails
Door lock
handle
water container
castor with brake
INTRODUCTION OF THE APPLIANCES
9/13
Control panel
Timer (for MD models)

OPERATION OF THE DEVICE (1)
10/13
CONTROL BOARDS
Just turn on the equipment from the on/off button on the digital indicator. Follow the temperature
from the digital thermometer. Temperature adjustment could be changed through the buttons with
ok sign, within the usage limits of the equipment. SET button is pressed and released and then the
available set value will appear. It is reached the required temperature value with the OK buttons
and then SET button is pressed again and the temperature value is recorded. The equipment is
then turned off with the on / off switch after daily usage.
CAUTION !
NEVER OPERATE YOUR DEVICE
WITHOUT GROUND CONNECTION.
Banquet trolley is used in kitchens of restaurants, fast food stands, canteens, hospitals in order to
keep foods warm and ready for service.
Before initial use of the device, the outer surface should be wiped with a cloth soaked in warm
water and soap.
NOTE: Do not use except purpose of use. The device should
be operated by qualified personnel knowing safety terms and
technical specifications and who has read the instruction
manual.

OPERATION OF THE DEVICE (2)
CAUTION! :The device should be installed and operated as
described in this user’s manual. If any failure is encountered please
contact our nearest authorized service dealer.
WHEN THE DEVICE HAS A FAILURE ONLYAUTHORIZED
…………………… SERVICE DEALERS ARE ALLOWED TO HANDLE
THE DEVICE. IF ANY PERSON OTHER THAN ONLYAUTHORIZED
SERVICE DEALERS HANDLE THE DEVICE, IT WILL NOT BE
COVERED BY THE GUARANTEE.
NEVER ALLOW PEOPLE WHO ARE NOT AUTHORIZED TO
HANDLE THE DEVICE. OTHERWISE PRODUCER COMPANY WILL
NOT BE RESPONSIBLE FOR THE CONSEQUENCES. DURING
MAINTENANCE SERVICE OUR AUTHORIZED SERVICE DEALERS
SHOULD NOT BE PROPOSED TO USE NON-ORIGINAL SPARE
PARTS FOR WHATSOEVER. INSTALLING ANY NON-ORIGINAL
SPARE PART TO THE DEVICE LEAVES THE DEVICE OUT OF
GUARANTEE COVERAGE.
11/13
CAUTION!The device should move just
on smooth surfaces!

CLEAN-UP AND MAINTENANCE
12/13
After using device, disconnect your device from power supply, by unplugging it or switching
it off, before carrying out periodical clean-up.
Clean your device with liquid dishwashing detergent and a piece of cloth or sponge soaked
in warm water. Then in order to remove detergent residuals rinse it with a piece of cloth
soaked in clear and warm water. Never use abrasive and aggressive cleaning agents like
thinners, bleachers, powder detergents.
For cleaning door gasket, only use warm water and soap. Do not use detergent or other
cleaning agents. Otherwise vacuum feature of the gasket will be harmed.
Be cautious during the clean-up, that water does not get into control boards.
CAUTION! :
Never use combustible, flammable and abrasive
materials for cleaning, like gasoline, gas, thinner,
acid for cleaning.
LIFE OF USE
Devices life of use is 10 year if it is used under recommended conditions.

13/13
TERMS OF GUARANTEE
1- Documents without sales date, factory and sales company approval on, are
not valid. In order to benefit from the guarantee, guarantee document should
be presented.
2- If the device is installed and operated following the instructions in the
installation, maintenance and user's manual, it is warranted for failures
resulting from failures resulting from workmanship and material failures.
3- The failures within the scope of guarantee, how and where these will be
eliminated, and the way and place of maintenance is determined by
................
4- The guarantee is only valid provided that the guarantee terms and the
instructions in the installation, maintenance and user's manual are fully
complied with. The guarantee is only valid for the warranted device, and no
other right or compensation for some other thing may be claimed.
5- If the information about the kind and the type of the device, serial numbers
printed on the guarantee document are scraped, rubbed or changed, then the
guarantee is not valid.
6- The guarantee covers only maintenance and repairing of material or
workmanship failure within the valid guarantee period. Failures and parts
within the scope of the guarantee are repaired and replaced without any
charge. Replaced parts belong to ................
7- The failures occurring in the device may only be handled by service
personnel authorized by ................ If people who are not authorized handle
the device, it will not be covered by the guarantee.
8- Installation should be carried out by authorized service personnel and the
service should be informed about the location change of the device.
9- When any failure occurs during operation, authorized service dealer
should be contacted.
10-Guarantee does not cover failures and damages resulting from loading,
unloading and shipping, which are outside the responsibility of ................
Similarly, failures and damages resulting from external factors are not
covered.