Pakedge Device & Software W7X User manual

W7x Quick Start Guide – Version 1.0
HIGH POWER
CONCURRENT DUAL
BAND WIRELESS-N
ACCESS POINT
Wirels Accs Point Family

1
W7x QUICK START GUIDE
Package Contents
Package contents depend on your W7x model. Please refer to the installation manual of your product.
System Requirements
Windows or Mac PC with an Ethernet interface
W7x Default Settings
Operation Mode: Access Point
IP Address: 192.168.1.250
Username/Password: pakedge/pakedgea
SSID: Pakedge1-2.4G and Pakedge1-5G
Power Output: High
Security: Disabled
Hardware Installation
NOTE: Please refer to the installation manual for more detailed information regarding the installation of the
Access Point.

2
W7x QUICK START GUIDE
The diagrams below depict the configuration using a PoE injector or a PoE switch to power the W7x.
Power using a PoE Injector

3
W7x QUICK START GUIDE
The Wireless Access Point should now be up and running with its default settings. It does not need any
particular configuration to be functional. To make changes to the SSID and security settings, you need to
access the W7x using a web browser.
Power using a PoE Switch

4
W7x QUICK START GUIDE
IP Address Configuration
The default IP address of the Access Point is 192.168.1.250. You must first configure the TCP/IP settings on
your computer to log into the W7x through a web browser.
Windows 7
Under Control Panel – Network and Internet, click on
“View Network Status” and “Tasks”. On the left
panel click on “Change Adapter Settings” and
right click on “Local Area Connection” and select
“Properties”.
Select “Use The Following IP Address” and enter the
following information:
IP Address: 192.168.1.10
Subnet Mask: 255.255.255.0
Click “OK”.

5
W7x QUICK START GUIDE
Login/Configure the Hardware
To access the configuration screen, enter 192.168.1.250 into the address bar of your web browser.
The website should appear
as shown to the right

6
W7x QUICK START GUIDE
W7x Configuration
To change the IP address and default gateway of the W7x, click on “LAN Settings” under “Network”.
NOTE: For the changes to take effect, click the button “Save Changes” in the lower left of the menu.
The unit will then reboot, applying the changes.

7
W7x QUICK START GUIDE
To change the default SSID name and security settings, click on “Network Settings” under “2.4G
Wireless” or “5G Wireless” (depending on the band you want to change), then click “Edit” for the SSID
you want to make changes to.

8
W7x QUICK START GUIDE
If you need to broadcast multiple SSID’s with different VLANS, click on “Network Settings”, then “Edit” on
the SSID and change the “VLAN ID” to whichever VLAN you want to broadcast.
NOTE: You need a VLAN capable router for this function to work correctly.

9
W7x QUICK START GUIDE
Mode Specific Configuration
By default, the W7x operates in Access Point Mode. You can change the operation mode, by band,
depending on your setup and needs. To change the operation mode, click on “Properties” under “System”
and switch to the desired mode.