Palmer PEPBOOST User manual

SAFETY INFORMATION
1. Please read these instructions carefully.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Use the equipment only in the intended manner and for the intended purpose.
6. Use only sufficiently stable and compatible stands and/or mounts (for fixed installations). Make certain
that wall mounts are properly installed and secured. Make certain that the equipment is installed securely
and cannot fall down.
7. During installation, observe the applicable safety regulations for your country.
8. Never install and operate the equipment near radiators, heat registers,ovens or other sources of heat. Make
certain that the equipment is always installed so that is cooled sufficiently and cannot overheat.
9. Never place sources of ignition, e.g., burning candles, on the equipment.
10. Ventilation slits must not be blocked.
11. Do not use this equipment in the immediate vicinity of water (does not apply to special outdoor equipment
- in this case, observe the special instructions noted below. Do not expose this equipment to flammable
materials, fluids or gases.
12. Make certain that dripping or splashed water cannot enter the equipment. Do not place containers filled
with liquids, such as vases or drinking vessels, on the equipment.
13. Make certain that objects cannot fall into the device.
14. Use this equipment only with the accessories recommended and intended by the manufacturer.
15. Open the device for changing the battery, do not modify this equipment.
16. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to
tripping hazards.
17. During transport, make certain that the equipment cannot fall down and possibly cause property damage
and personal injuries.
18. If your equipment is no longer functioning properly, if fluids or objects have gotten inside the equipment or
if it has been damaged in another way, switch it off immediately and unplug it from the mains outlet (if it is
a powered device). This equipment may only be repaired by authorized, qualified personnel.
19. Clean the equipment using a dry cloth.
20. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate
plastic and paper/cardboard.
21. Plastic bags must be kept out of reach of children.
22. If the equipment has been exposed to strong fluctuations in temperature (for example, after transport), do
not switch it on immediately. Moisture and condensation could damage the equipment. Do not switch on
the equipment until it has reached room temperature.
23. Do not step on the power cord. Make certain that the power cable does not become kinked, especially at
the mains outlet and/or power adapter and the equipment connector.
24. When connecting the equipment, make certain that the power cord or power adapter is always freely
accessible. Always disconnect the equipment from the power supply if the equipment is not in use or if
you want to clean the equipment. Always unplug the power cord and power adapter from the power outlet
at the plug or adapter and not by pulling on the cord. Never touch the power cord and power adapter with
wet hands.
25. To disconnect the equipment from the power mains completely, unplug the power cord or power adapter
from the power outlet.
26. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or
before extended periods of disuse.
CAUTION:
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
There are no user serviceable parts inside. Have repairs carried out only by qualified service personnel.
CAUTION – HIGH VOLUME LEVELS WITH AUDIO PRODUCTS!
This equipment is intended for professional use. Therefore, commercial use of this equipment is subject to the
respectively applicable national accident prevention rules and regulations. As a manufacturer, Adam Hall is
obligated to notify you formally about the existence of potential health risks. Hearing damage due to high volume
and prolonged exposure: When in use, this product is capable of producing high sound-pressure levels (SPL)
that can lead to irreversible hearing damage in performers, employees, and audience members. For this reason,
avoid prolonged exposure to volumes in excess of 90 dB.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: http://www.adamhall.com/media/shop/
downloads/documents/manufacturersdeclarations.pdf
To request warranty service for a product, please contact Adam Hall GmbH, Daimler Straße 9, 61267 Neu Ans-
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste separation)
This symbol on the product, or the documents accompanying the product, indicates that this appliance may not
be treated as household waste. This is to avoid environmental damage or personal injury due to uncontrolled
waste disposal. Please dispose of this product separately from other waste and have it recycled to promote
sustainable economic activity.
PANEL DESCRIPTION
1GAIN CONTROL
Provides up to 25 dB of clean boost fully clockwise to add more gain to your signal while maintaining your
original tone.
NOTE: Despite the simple one-knob-only design, the PEPBOOST can be used for a variety of purposes.
a) Put it in front of a non-master volume amp for more ouput, power amp distortion and natural compression.
b) With a master volume amp, you can set the preamp gain fairly high and kick in the PEPBOOST for even
more gain and a rich, sustaining tone (yet without an overly dramatic volume increase) while the master
controls the output level.
c) Use the PEPBOOST to overload the input of overdrive and distortion pedals for thick, saturated sounds with
lots of compression, again without a major volume increase, or use it at the end of your effects chain for a
linear, uncolored level boost.
2LED STATUS INDICATOR
Lights when the effect is switched on. This LED also doubles as battery level indicator when the pedal is
battery powered. When the LED goes dim or no longer lights while the effect is activated the battery is
drained and needs replacing.
3ON/OFF FOOTSWITCH
Activates the effect or switches the pedal to bypass mode.
4INPUT
Use a quality instrument or patch cable with 1/4” plugs to connect your guitar or the output of another
effects pedal to this jack.
5OUTPUT
Use a quality instrument or patch cable with 1/4” plugs to connect this jack to the input of your amplifier or
that of the next stomp box in your signal chain.
69V DC INPUT
For mains operation, connect an optional 9 Volt DC power adapter to this barrel style jack (e.g. Palmer PW9V). Please
refer to “POWER REQUIREMENTS” for details.
POWER REQUIREMENTS
Battery: Standard 9V battery
Power supply:
-9 V DC (regulated) 50 mA minimum
-5.5 x 2.1 mm barrel style connector center negative
ATTENTION: Please use a DC power supply or battery only! Failure to
do so may demage the unit and void the warranty.
SPECIFICATIONS
Model name: PEPBOOST
Product type: effects
Type: guitar effect pedals
Inputs: 1
Input connectors: 6.3 mm Jack
Input impedance: 1 M Ohm(s)
Outputs: 1
Output connectors: 6.3 mm Jack
Output impedance: 100 k Ohm(s)
Residual noise: -85 dB
Controls: Gain
Display: on/off
Operating voltage: 9 V DC power supply, 9 V block
Power consumption: 20 m A
Cabinet material: sheet steel
Cabinet / Housing surface: powder coated
Width: 60 mm
Depth: 100 mm
Weight: 0.3 kg
PEPBOOST
PALMER POCKET BOOSTER - Booster effect for guitar - Manual
© Palmer Musical Instruments, Adam Hall GmbH, D-61267 Neu-Anspach, Daimlerstr. 9, Germany TEL: ++49 (0)6081 94190
FAX: ++49 (0)6081 43280 WEB: www.adamhall.com, www.palmer-germany.com EMAIL: info@palmer-germany.com
PANEL DESCRIPTION
© Palmer Musical Instruments, Adam Hall GmbH, D-61267 Neu-Anspach, Daimlerstr. 9, Germany TEL: ++49 (0)6081 94190
3
2
1
GAIN CONTROL
Provides up to 25 dB of clean boost fully clockwise to add more gain to your signal while maintaining your
NOTE: Despite the simple one-knob-only design, the PEPBOOST can be used for a variety of purposes.
a) Put it in front of a non-master volume amp for more ouput, power amp distortion and natural compression.
PALMER POCKET BOOSTER - Booster effect for guitar - Manual
PALMER POCKET BOOSTER - Booster effect for guitar - Manual
PALMER POCKET BOOSTER - Booster effect for guitar - Manual
PALMER POCKET BOOSTER - Booster effect for guitar - Manual
PALMER POCKET BOOSTER - Booster effect for guitar - Manual
PALMER POCKET BOOSTER - Booster effect for guitar - Manual
PALMER POCKET BOOSTER - Booster effect for guitar - Manual
PALMER POCKET BOOSTER - Booster effect for guitar - Manual
PALMER POCKET BOOSTER - Booster effect for guitar - Manual
PALMER POCKET BOOSTER - Booster effect for guitar - Manual
PALMER POCKET BOOSTER - Booster effect for guitar - Manual
PALMER POCKET BOOSTER - Booster effect for guitar - Manual
PALMER POCKET BOOSTER - Booster effect for guitar - Manual
PALMER POCKET BOOSTER - Booster effect for guitar - Manual
PALMER POCKET BOOSTER - Booster effect for guitar - Manual
PALMER POCKET BOOSTER - Booster effect for guitar - Manual
PALMER POCKET BOOSTER - Booster effect for guitar - Manual
465

© Palmer Musical Instruments, Adam Hall GmbH, D-61267 Neu-Anspach, Daimlerstr. 9, Germany TEL: ++49 (0)6081 94190
FAX: ++49 (0)6081 43280 WEB: www.adamhall.com, www.palmer-germany.com EMAIL: info@palmer-germany.com
SICHERHEITSHINWEISE
1. Lesen Sie diese Anleitung bitte sorgfältig durch.
2. Bewahren Sie alle Informationen und Anleitungen an einem sicheren Ort auf.
3. Befolgen Sie die Anweisungen.
4. Beachten Sie alle Warnhinweise. Entfernen Sie keine Sicherheitshinweise oder andere Informationen vom
Gerät.
5. Verwenden Sie das Gerät nur in der vorgesehenen Art und Weise.
6. Verwenden Sie ausschließlich stabile und passende Stative bzw. Befestigungen (bei Festinstallationen).
Stellen Sie sicher, dass Wandhalterungen ordnungsgemäß installiert und gesichert sind. Stellen Sie sicher,
dass das Gerät sicher installiert ist und nicht herunterfallen kann.
7. Beachten Sie bei der Installation die für Ihr Land geltenden Sicherheitsvorschriften.
8. Installieren und betreiben Sie das Gerät nicht in der Nähe von Heizkörpern, Wärmespeichern, Öfen oder
sonstigen Wärmequellen. Sorgen Sie dafür, dass das Gerät immer so installiert ist, dass es ausreichend
gekühlt wird und nicht überhitzen kann.
9. Platzieren Sie keine Zündquellen wie z.B. brennende Kerzen auf dem Gerät.
10. Lüftungsschlitze dürfen nicht blockiert werden.
11. Betreiben Sie das Gerät nicht in unmittelbarer Nähe von Wasser (gilt nicht für spezielle Outdoor Geräte -
beachten Sie in diesem Fall bitte die im Folgenden vermerkten Sonderhinweise). Bringen Sie das Gerät
nicht mit brennbaren Materialien, Flüssigkeiten oder Gasen in Berührung.
12. Sorgen Sie dafür, dass kein Tropf- oder Spritzwasser in das Gerät eindringen kann. Stellen Sie keine mit
Flüssigkeit gefüllten Behältnisse wie Vasen oder Trinkgefäße auf das Gerät.
13. Sorgen Sie dafür, dass keine Gegenstände in das Gerät fallen können.
14. Betreiben Sie das Gerät nur mit dem vom Hersteller empfohlenen und vorgesehenen Zubehör.
15. Öffnen Sie das Gerät zum Batteriewechsel, verändern Sie das Gerät nicht.
16. Überprüfen Sie nach dem Anschluss des Geräts alle Kabelwege, um Schäden oder Unfälle, z. B. durch
Stolperfallen zu vermeiden.
17. Achten Sie beim Transport darauf, dass das Gerät nicht herunterfallen und dabei mög-
licherweise Sach- und Personenschäden verursachen kann.
18. Wenn Ihr Gerät nicht mehr ordnungsgemäß funktioniert, Flüssigkeiten oder Gegenstände in das Gerätein-
nere gelangt sind, oder das Gerät anderweitig beschädigt wurde, schalten Sie es sofort aus und trennen es
von der Netzsteckdose (sofern es sich um ein aktives Gerät handelt). Dieses Gerät darf nur von autorisier-
tem Fachpersonal repariert werden.
19. Verwenden Sie zur Reinigung des Geräts ein trockenes Tuch.
20. Beachten Sie alle in Ihrem Land geltenden Entsorgungsgesetze. Trennen Sie bei der Entsorgung der Ver-
packung bitte Kunststoff und Papier bzw. Kartonagen voneinander.
21. Kunststoffbeutel müssen außer Reichweite von Kindern aufbewahrt werden
22. Schalten Sie das Gerät nicht sofort ein, wenn es starken Temperaturschwankungen ausgesetzt war
(beispielsweise nach dem Transport). Feuchtigkeit und Kondensat könnten das Gerät beschädigen.
Schalten Sie das Gerät erst ein, wenn es Zimmertemperatur erreicht hat.
23. Treten Sie nicht auf das Netzkabel. Sorgen Sie dafür, dass spannungsführende Kabel speziell an der Netz-
buchse bzw. am Netzadapter und der Gerätebuchse nicht geknickt werden.
24. Achten Sie bei der Verkabelung des Geräts immer darauf, dass das Netzkabel bzw. der Netzadapter stets
frei zugänglich ist. Trennen Sie das Gerät stets von der Stromzuführung, wenn das Gerät nicht benutzt
wird, oder Sie das Gerät reinigen möchten. Ziehen Sie Netzkabel und Netzadapter immer am Stecker bzw.
am Adapter und nicht am Kabel aus der Steckdose. Berühren Sie Netzkabel und Netzadapter niemals mit
nassen Händen.
25. Um das Gerät vollständig vom Stromnetz zu trennen, entfernen Sie das Netzkabel bzw. den Netzadapter
aus der Steckdose.
26. Entfernen Sie Netzkabel und Netzadapter aus der Steckdose bei Gefahr eines Blitzschlags oder wenn Sie
das Gerät länger nicht verwenden.
ACHTUNG:
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Im Inneren des Geräts befinden sich keine Teile, die vom Bediener repariert oder gewartet werden können.
Lassen Sie Reparaturen ausschließlich von qualifiziertem Service-Personal durchführen.
ACHTUNG HOHE LAUTSTÄRKEN BEI AUDIOPRODUKTEN!
Dieses Gerät ist für den professionellen Einsatz vorgesehen. Der kommerzielle Betrieb dieses Geräts unterliegt
den jeweils gültigen nationalen Vorschriften und Richtlinien zur Unfallverhütung. Als Hersteller ist Adam Hall ge-
setzlich verpflichtet, Sie ausdrücklich auf mögliche Gesundheitsrisiken hinzuweisen. Gehörschäden durch hohe
Lautstärken und Dauerbelastung: Bei der Verwendung dieses Produkts können hohe Schalldruckpegel (SPL)
erzeugt werden, die bei Künstlern, Mitarbeitern und Zuschauern zu irreparablen Gehörschäden führen können.
Vermeiden Sie länger anhaltende Belastung durch hohe Lautstärken über 90 dB.
HERSTELLERGARANTIE & HAFTUNGSBESCHRÄNKUNG
Unsere aktuellen Garantiebedingungen und Haftungsbeschränkung finden Sie unter: http://www.adamhall.com/
media/shop/downloads/documents/manufacturersdeclarations.pdf
Im Service Fall wenden Sie sich bitte an Adam Hall GmbH, Daimlerstraße 9, 61267 Neu Anspach / E-Mail Info@
adamhall.com / +49 (0)6081 / 9419-0
KORREKTE ENTSORGUNG DIESES PRODUKTS
(Gültig in der Europäischen Union und anderen europäischen Ländern mit Mülltrennung) Dieses Symbol auf
dem Produkt oder dazugehörigen Dokumenten weist darauf hin, dass das Gerät am Ende der Produktlebenszeit
nicht zusammen mit dem normalen Hausmüll entsorgt werden darf, um Umwelt- oder Personenschäden durch
unkontrollierte Abfallentsorgung zu vermeiden.Bitte entsorgen Sie dieses Produkt getrennt von anderen Abfällen
und führen es zur Förderung nachhaltiger Wirtschaftskreisläufe dem Recycling zu. Als Privatkunde erhalten Sie
Informationen zu umweltfreundlichen Entsorgungsmöglichkeiten über den Händler, bei dem das Produkt erwor-
ben wurde, oder über die entsprechenden regionalen Behörden. Als gewerblicher Nutzer kontaktieren Sie bitte
Ihren Lieferanten und prüfen die ggf. vertraglich vereinbarten Konditionen zur Entsorgung der Geräte. Dieses
Produkt darf nicht zusammen mit anderen gewerblichen Abfällen entsorgt werden.
ANSCHLÜSSE UND BEDIENELEMENTE
1GAIN-REGLER
Hebt das Signal bis 25 dB bei Rechtsanschlag an. Der Booster arbeitet linear und beeinträchtigt den Klang
des Eingangssignals in keiner Weise.
HINWEIS: Trotz seines einfachen Designs mit nur einem Regler ist der PEPBOOST äußerst vielseitig.
a) Er sorgt vor einem Verstärker ohne Master-Volumen für mehr Lautstärke, Endstufenverzerrung und
Kompression.
b) Bei einem Master-Volume-Amp mit hoch eingestelltem Preamp erreicht der PEPBOOST deutlich mehr
Verzerrung und einen fetten Ton mit viel Sustain, ohne die Lautstärke wesentlich anzuheben. Das Master-
Volumen regelt dabei den Ausgangspegel des Verstärkers.
c) Vor einem Overdrive- oder Distortion-Pedal bewirkt der PEPBOOST eine zusätzliche Übersteuerung für
satte, singende Sounds mit viel Kompression, auch hier ohne besondere Lautstärkeanhebung.
d) Am Ende einer Effektkette sorgt der Booster für einen höheren Pegel, z.B. bei Solopassagen, ohne den
Klang zu verändern.
2LED-STATUSANZEIGE
Leuchtet, wenn der Booster eingeschaltet ist. Im Batteriebetrieb zeigt die LED gleichzeitig den Batteriestand
an. Wenn die Helligkeit bei eingeschaltetem Effekt abnimmt oder die LED nicht leuchtet, muss eine frische
Batterie eingesetzt werden.
3EIN- UND AUSSCHALTER
Aktiviert den Booster oder schaltet das Pedal auf Bypass.
4INPUT
Schließen Sie hier Ihre Gitarre an, oder verbinden Sie den Ausgang eines vorgeschalteten Geräts mit diesem
Eingang. Verwenden Sie dafür ein hochwertiges Instrumentenkabel mit 6,35 mm Klinkensteckern.
5OUTPUT
Verbinden Sie diese Buchse mit dem Eingang Ihres Verstärkers oder dem nächsten Gerät Ihrer Effektkette.
Verwenden Sie dafür ein hochwertiges Instrumentenkabel mit 6,35 mm Klinkensteckern.
69V CC INPUT
Schließen Sie hier zum Netzbetrieb ein als Zubehör erhältliches 9 Volt- Gleichstromnetzteil an (z.B. PALMER
PW9V). Details finden Sie im Abschnitt “STROMVERSORGUNG”.
STROMVERSORGUNG
Batterie: Standard-9V-Blockbatterie
Stromversorgung:
- 9 V DC (geregelt), mindestens 50 mA
- 5,5 x 2,1 mm Rundstecker (Minuspol innen)
VORSICHT! Verwenden Sie Gleichstromnetzteil und Batterien nicht gleichzeitig! Bei Nichtbeachtung kann
das Gerät beschädigt werden und die Garantie erlöschen.
SPEZIFIKATIONEN
Modellbezeichnung: PEPBOOST
Produktart: Effekt
Typ: Gitarreneffekte
Anzahl Eingänge: 1
Eingangsanschlüsse: 6,3 mm Klinke
Eingangsimpedanz: 1 M Ohm
Anzahl Ausgänge: 1
Ausgangsanschlüsse: 6,3 mm Klinke
Ausgangsimpedanz: 100 k Ohm
Eigenrauschen: -85 dB
Bedienelemente: Gain
Anzeigeelemente: An/Aus
Stromversorgung: Netzteil 9 VDC, 9 V Block Batterie
Stromaufnahme: 20 m A
Gehäusematerial: Stahlblech
Gehäuseoberfläche: pulverbeschichtet
Breite: 60 mm
Tiefe: 100 mm
Höhe: 55 mm
Gewicht: 0.3 kg
PEPBOOST
PALMER POCKET BOOSTER - BOOSTER Effekt für Gitarre - Handbuch
3
2
1
GAIN-REGLER
Hebt das Signal bis 25 dB bei Rechtsanschlag an. Der Booster arbeitet linear und beeinträchtigt den Klang
des Eingangssignals in keiner Weise.
HINWEIS: Trotz seines einfachen Designs mit nur einem Regler ist der PEPBOOST äußerst vielseitig.
a) Er sorgt vor einem Verstärker ohne Master-Volumen für mehr Lautstärke, Endstufenverzerrung und
PALMER POCKET BOOSTER - BOOSTER Effekt für Gitarre - Handbuch
PALMER POCKET BOOSTER - BOOSTER Effekt für Gitarre - Handbuch
PALMER POCKET BOOSTER - BOOSTER Effekt für Gitarre - Handbuch
PALMER POCKET BOOSTER - BOOSTER Effekt für Gitarre - Handbuch
PALMER POCKET BOOSTER - BOOSTER Effekt für Gitarre - Handbuch
PALMER POCKET BOOSTER - BOOSTER Effekt für Gitarre - Handbuch
PALMER POCKET BOOSTER - BOOSTER Effekt für Gitarre - Handbuch
PALMER POCKET BOOSTER - BOOSTER Effekt für Gitarre - Handbuch
PALMER POCKET BOOSTER - BOOSTER Effekt für Gitarre - Handbuch
PALMER POCKET BOOSTER - BOOSTER Effekt für Gitarre - Handbuch
PALMER POCKET BOOSTER - BOOSTER Effekt für Gitarre - Handbuch
PALMER POCKET BOOSTER - BOOSTER Effekt für Gitarre - Handbuch
PALMER POCKET BOOSTER - BOOSTER Effekt für Gitarre - Handbuch
PALMER POCKET BOOSTER - BOOSTER Effekt für Gitarre - Handbuch
PALMER POCKET BOOSTER - BOOSTER Effekt für Gitarre - Handbuch
PALMER POCKET BOOSTER - BOOSTER Effekt für Gitarre - Handbuch
PALMER POCKET BOOSTER - BOOSTER Effekt für Gitarre - Handbuch
PALMER POCKET BOOSTER - BOOSTER Effekt für Gitarre - Handbuch
PALMER POCKET BOOSTER - BOOSTER Effekt für Gitarre - Handbuch
PALMER POCKET BOOSTER - BOOSTER Effekt für Gitarre - Handbuch
PALMER POCKET BOOSTER - BOOSTER Effekt für Gitarre - Handbuch
PALMER POCKET BOOSTER - BOOSTER Effekt für Gitarre - Handbuch
PALMER POCKET BOOSTER - BOOSTER Effekt für Gitarre - Handbuch
PALMER POCKET BOOSTER - BOOSTER Effekt für Gitarre - Handbuch
PALMER POCKET BOOSTER - BOOSTER Effekt für Gitarre - Handbuch
PALMER POCKET BOOSTER - BOOSTER Effekt für Gitarre - Handbuch
PALMER POCKET BOOSTER - BOOSTER Effekt für Gitarre - Handbuch
PALMER POCKET BOOSTER - BOOSTER Effekt für Gitarre - Handbuch
PALMER POCKET BOOSTER - BOOSTER Effekt für Gitarre - Handbuch
PALMER POCKET BOOSTER - BOOSTER Effekt für Gitarre - Handbuch
465
Table of contents
Languages:
Other Palmer Music Pedal manuals

Palmer
Palmer Peptrem User manual

Palmer
Palmer root effects HERRENCHOR User manual

Palmer
Palmer PEPENCORE User manual

Palmer
Palmer Wupper River Series User manual

Palmer
Palmer PEMUTT Mutterstolz User manual

Palmer
Palmer PETIMEP User manual

Palmer
Palmer RIVER Series User manual

Palmer
Palmer vils User manual

Palmer
Palmer Pechor Chorus User manual

Palmer
Palmer RIVER Series User manual