panana MWJG-09 User manual

Number of
packages
1
80 MIN
APPROXIMATE
ASSEMBLY TIME
2
2 PERSON ASSEMBLY 2 M
2
REQUIRED
ASSEMBLY SPACE
FLOOR AREA1M x 2M
Maintenance skills
1.Use a clean and soft cloth to remove dust regularly; do not use solvents;
2.If you are in a humid environment for a long time, you must ventilate
and exhaust moisture to avoid the furniture from being immersed in ater;
3.Keep away from high temperature sources such as stoves, radiators, etc.
to prevent the furniture from deforming.
Tools needed:
Crosshead
Screwdriver
MWJG-09 Assembly Manual
01/26
3-Drawer Wood Mobile File Cabinet
MWJG-9 Assembly Manual
Climbing Prohibit Hammer

Keep all parts out of the children’s reach.
NOTE
crosshead screwdriver
Place all the panels on a clean and smooth surface, such as a rug orcarpet,
to prevent them from being scratched.
Make sure that all parts in your product package, including panels and
accessories, match up with those listed in the Panels & Accessories list.
Don’t tighten screws or bolts until all the pieces are fitted.
It is recommended to have 2 persons to complete the assembly.
CONTACT US
You need to have a crosshead screwdriver and hammer beforehand.
Both not included in package.
hammer
IMPORTANT: Tipping can injure young children.
NOTE
①Safe carriage,multi-people are needed.
②Handle with care,protective layer is required. ③In case of any doubts,contact Panana.
Home&Garden
MWJG-09 Assembly Manual
02/26
WARNING
If you have any issue regarding the product, please contact us;
The paper version is not clear, please contact customer service to obtain the
electronic version.

MWJG-09 Assembly Manual
03/26
Note:
The accessories list is classified by the smallest packaging unit, and the kit accessories
represent the matching accessories and are packed in a separate package.
In order to facilitate installation, the panel has pre-drilled positioning holes for the
accessories. When installing, only need to match the mounting holes of the accessories
with the pre-drilled holes on the panel and lock them with the matching screws. For
details, see the relevant installation instructions.
Exploded View
Carpet
It is recommended to install
on soft pads such as carpets
①
②
③
④
⑤
⑥
⑦
⑦
⑧
⑧
⑨
⑨
⑩
⑩
⑪
⑫
⑬
⑭
⑮
⑯

MWJG-09 Assembly Manual
04/26
Please check the panel list before installation.
Panel List
.
Item
no. Reference Image Qty. Item no. Reference Image Qty.
①X1
②X1
③X1
④X1
⑤X1
X1
X2
⑯
⑧
X1
⑥
X2
⑨
X2
⑦
X2
⑩
X1
⑪
X1
⑬
X1
⑫
X1
⑭
X1
⑮

MWJG-09 Assembly Manual
05/26
Please check the Accessories list before installation.
Accessories List
Item
no. Reference Image Qty.
A
Cam Lock Nuts
X16
BX4
Item
no. Reference Image Qty.
Mini Cam Lock Nuts
CX12
X8
D
WoodDowel
NX1
14''
N(A)L
N(A)R
N(B)L N(B)R
3-Section Ball Bearing Slide Rail Kit
Detachable
EX2
Bottom-Mount Drawer Slide Kit
Detachable
14''
E(A)L
E(B)L
E(A)R
E(B)R
vice
vice
GX16
ST5*38
Self-tapping screws
JX2
360°swivel casters
KX2
Lockable casters
P
Q
X1
X4
X3
Cabinet Lock Kit
H
H1 H2
H1
X2
File Lever
M
X8
Symmetrical parts
The same left and right
I
Corner Guard Kit
I1 I2
P1
P2
P1
P1
P1
P3
P4
P5/Q
Cam Lock Nuts Kit
Cabinet Lock Kit
OX1
Lockable casters
F/L Self-tapping screws
X37
ST4*12
A1 A2
ST4*14 X16
Cam Lock Nuts Cover

MWJG-09 Assembly Manual
06/26
12.7mm/0.5in 12.7mm/0.5in
Use Accessory "N"
Side
panel
Side
panel
Drawer
Drawer side panel Drawer side panel
IMPORTANT PRECAUTIONS
Match the pre-drilled lead holes, and then fix
them with screws; (all accessory of our products
can use this method)
IMPORTANT PRECAUTIONS
PULL
PRESS
N(A)L/R
N(B)L/R
N(A)L/R N(B)L/R
Press the plastic part and pull out
N(B) to separate the drawer slides.
The same method is used for the left and
right slide rails.
Fixed to the bottom of
the drawer side panel
N(A) N(B)
A
A
Section(A-A)
Fixed on the side
panel of the cabinet
Step1
Step2
Before installing the drawer slide rail,N must be split into two parts, N (A) and N (B).
N(A)Fixed on the side panel of the cabinet,N(B)Fixed to the bottom of the drawer
side panel.
Normal
Status
3-Section Ball Bearing Drawer Slide Rail Kit
Please grip the N(A)
part while sliding the
N(B) part
The same left and right
Lever
Lever
2
8
13
a
b
c

MWJG-09 Assembly Manual
07/26
Use Accessory "E"
12.7mm/0.5in 12.7mm/0.5in
Side
panel
Side
panel
Drawer
Drawer side panel Drawer side panel
IMPORTANT PRECAUTIONS
E(A)L
E(A)R
E(B)L
E(B)R
E(A)
E(B)
Fixed on the
side panel of
the cabinet
E(A)、E(B) normal coordination effect
B
BE(B)
E(A)
Section(B-B)
Normal
Status
Fixed to the bottom of
the drawer side panel
Bottom-Mount Drawer Slide Kit
Symmetrical Parts
4
8
13

MWJG-09 Assembly Manual
08/26
Use Cam Screws 、Cam Lock Nuts、Dowel Kit(a)
IMPORTANT PRECAUTIONS
Panel B
Panel B
Panel B
WoodDowel
D
Dowel Hole
Cam Screws Hole
Cam Lock Nuts Hole
Panel A
Cam Screws
A1
A
A1
A2
A2
Panel
A
1
The thread is fully
and vertically
screwed in
CORRECT
ERROR
A1
1.Screw the Cam Screws into the pre-drilled holes in the panel.
2.Screw the WoodDowel into the pre-drilled holes in the panel.
Pre-drilled Hole
CORRECT
ERROR
Disassembly
A2
1
4 5
2 3

MWJG-09 Assembly Manual
09/26
Use Cam Screws 、Cam Lock Nuts、Dowel Kit(b)
IMPORTANT PRECAUTIONS
ENSURE
THERE IS NO
GAP BETWEEN
THE PANELS
RIGHT TURN
UNTIL TIGHT
RIGHT TURN
UNTIL TIGHT
ENSURE THERE IS NO GAP
BETWEEN THE PANELS
B for cabinet body,
C(mini) for drawer
Panel A
Panel B
Step1
Step2
Align State
Locked State
3.Join the panels:In the Panel B, insert and align the cam lock.
CORRECT
Insert
Align
1
Insert
2
3
3
Align
1
RIGHT TURN
UNTIL TIGHT
3
Insert
2
and then Turn the cam lock.
Cam Screws Hole
Cam Screws Hole
Cam Screws Hole
Cam Lock Nuts
Cam Lock Nuts

MWJG-09 Assembly Manual
10/26
1


AX4 P5x1 FX2
A1
A2
②x1
A1
A2
A1
A2
A1
A2
A1
A2
F
P5
F
Pre-drilled
Front
Direction mark
Left

MWJG-09 Assembly Manual
11/26
Pre-drilled
Pre-drilled
When installing, please make sure that the
screws are flat and not skewed; otherwise,
Pull out this part
until it stops. At this
time, can see all
the mounting holes.
Pre-drilled
Note: The direction is based on the normal
placement of the product as a reference.
the drawer will not be perfectly assembled.
E(A)L
E(A)L
N(A)R
N(A)R
N(A)L
E(A)L
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
③X1
④X1
Top
Top
Front
Front
F 18X
2
E (A)L
E(A) 2X
E(A)R
N(A)L
N(A)R
N(A) 1X
E(A)R
E(A)R

MWJG-09 Assembly Manual
12/26
E(A)
E(A)
Top
Front
Dimensions unit: mm
(1in=1mm/25.4)
Pre-drilled holes match N(A), E(A) mounting holes
1st
4th
8th13th
1st
4th
8th13th
1st2th8th13th
IMPORTANT PRECAUTIONS
After the previous step is completed, please check whether
the accessories are in the position as shown in the figure, if
not, please adjust them in time to prevent installation failure!
N(A)
Pull out this part until it stops.
At this time, can see all the
mounting holes.
F F F
F
F F F
F F

MWJG-09 Assembly Manual
13/26
Top
Top
D 8X
3
D
D
D
D
D
D
D
D
③x1
①x1

Front
MWJG-09 Assembly Manual
14/26
B 4X
4
③x1
①x1
②x1
B
B
B
B
Direction mark
Notch alignment
Left
Top

MWJG-09 Assembly Manual
15/26
5
④ Installation
Note: The direction is based on the normal
placement of the product as a reference.
Front
③x1
④x1
①x1
Left
Top

MWJG-09 Assembly Manual
16/26
6
Note: The direction is based on the normal
placement of the product as a reference.
GX4 QX4
G
Direction mark
Notch alignment
Left
Top
G
G
G
G
Q

MWJG-09 Assembly Manual
17/26
7
"OPEN" "LOCK"
How to use "J"
Note: The direction is based on the normal
placement of the product as a reference.
LX16KX2JX2
K
Lx4
K
Lx4
K
Lx4
Lx4
J
Lx4
J
Rotate 180 °

MWJG-09 Assembly Manual
18/26
8
FX4 AX4 CX4 GX4E X1
STEP 1
Drawer installation
STEP 2
Drawer installation
STEP 3
Drawer installation
STEP 4
Drawer installation
C
G
A1A1
A2
A2
A1A1
A2
A2
C
CC
⑧x1
⑦x1
⑯x1
⑨x1
⑩x1
⑯x1
step 1
step 2
G
GG
F
FF
F
F
PULLEY BEHIND
(B)
E(B)R
E(B)L
E(B)L
A1
A2

MWJG-09 Assembly Manual
19/26
FX4 AX4 CX4 GX4E X1
(B)
A1
A2
9
STEP 1
Drawer installation
STEP 2
Drawer installation
STEP 3
Drawer installation
STEP 4
Drawer installation
C
GG
C
CC
⑥x1
⑨x1
⑩x1
⑥x1
step 1
step 2
GG
F
FF
F
F
PULLEY BEHIND
E(B)R
E(B)L
E(B)L
⑦x1
⑧x1
A1A1
A2
A2
A1A1
A2
A2

MWJG-09 Assembly Manual
20/26
GX4 OX1
STEP 1
Drawer installation
STEP 2
Drawer installation
STEP 3
Drawer installation
STEP 4
Drawer installation
AA
AA
⑭x1
⑮x1
step 1
GG
GG
F
10
FX9 AX4 CX4 F X1
(B)
Fx3
O
⑪x1
CC
CC
⑪x1
step 2
F
F
F
N(B)R
N(B)L
N(B)R
⑫x1 ⑬x1