
INSTRUCTION
MANUAL
Cylindrical Photoelectric Sensor
CY-100 Series
MJEC-CY100 No.0025-19V
Thank you very much for purchasing Panasonic products.
Please read this Instruction Manual carefully and thor-
oughly for the correct and optimum use of this product.
Kindly keep this manual in a convenient place for quick
reference.
WARNING
Never use this product as a sensing device for per-
sonnel protection.
In case of using sensing devices for personnel pro-
tection, use products which meet laws and standards,
such as OSHA, ANSI or IEC etc., for personnel pro-
tection applicable in each region or country.
1CE MARKED PRODUCT
This product is CE marked product.
2CAUTIONS
This product has been developed / produced for in-
dustrial use only.
This sensor is suitable for indoor use only.
Extension up to total 10m (emitter and receiver each
for thru-beam type), or less, is possible with 0.34mm
2
conductor area, or more, cable.
3MOUNTING
The tightening torque should be 3N·m or less.
Use a cable with connector (optional) for
M12 connector type.
Tightening torque for connector part is 2N·m or less.
This product Cable with connectorMounting board
Nut Nut
4RoHS DIRECTIVE
This equipment complies with RoHS (EC and Chinese
directive).
Chinese RoHS indicates inclusion despite regulation
value. (Refer Chinese part.)
ӕৢᛟଢ
ࢩࣜࣥࢲᆺࣅ࣮࣒ࢭࣥࢧ
CY-100ࢩ࣮ࣜࢬ
ࡇࡢࡓࡧࡣࠊࣃࢼࢯࢽࢵࢡ〇ရࢆ࠾㈙࠸ୖࡆ࠸ࡓࡔࡁࠊ
࠶ࡾࡀ࠺ࡈࡊ࠸ࡲࡍࠋ
ࡈ⏝ࡢ๓ࡇࡢྲྀᢅㄝ᭩ࢆࡼࡃ࠾ㄞࡳ࡞ࡾࠊṇࡋ
ࡃ᭱㐺࡞᪉ἲ࡛ࡈ⏝ࡃࡔࡉ࠸ࠋ
ᑦࠊࡇࡢྲྀᢅㄝ᭩ࡣษಖ⟶ࡋ࡚ࡃࡔࡉ࠸ࠋ
ᜩԓ
ᮏ〇ရࡣࠊேయಖㆤ⏝ࡢ᳨ฟ⨨ࡋ࡚ࡣ⏝ࡋ࡞
࠸࡛ࡃࡔࡉ࠸ࠋ
ேయಖㆤࢆ┠ⓗࡍࡿ᳨ฟࡣࠊOSHAࠊANSI࠾ࡼ
ࡧIEC➼ࡢྛᅜࡢேయಖㆤ⏝㛵ࡍࡿἲᚊ࠾ࡼࡧつ
᱁㐺ྜࡍࡿ〇ရࢆࡈ⏝ࡃࡔࡉ࠸ࠋ
1CEȞȸǭȳǰݣᝋᙌԼ
ᮏ〇ရࡣࠊCE࣐࣮࢟ࣥࢢᑐ㇟〇ရ࡛ࡍࠋ
2දʙ
ᮏ〇ရࡣࠊᕤᴗ⎔ቃ⏝ࡍࡿ┠ⓗ࡛㛤Ⓨ/〇㐀ࡉࢀ
ࡓ〇ရ࡛ࡍࠋ
ᒇእ࡛⏝ࡋ࡞࠸࡛ࡃࡔࡉ࠸ࠋ
ࢣ࣮ࣈࣝᘏ㛗ࡣࠊᑟయ᩿㠃✚ࡀ0.34mm2௨ୖࡢࢣ࣮
ࣈࣝࢆ⏝ࡋࠊ㛗10m㏱㐣ᆺࡣᢞ㺃ཷගჾྛࡲ࡛
ྍ⬟࡛ࡍࠋ
3ӕǓ˄ƚ
ᮏయࡢ⥾ࡵࡅࢺࣝࢡࡣࠊ3N㺃m௨ୗ࡛ࡍࠋ
M12ࢥࢿࢡࢱࢱࣉࡣࠊࢥࢿࢡࢱࢣ࣮ࣈࣝ
CN-24Cڧ-Cڧูࢆ⏝ࡋ࡚ࡃࡔࡉ࠸ࠋ
ࢥࢿࢡࢱ㒊ࡢ⥾ࡵࡅࢺࣝࢡࡣࠊ2N㺃m௨ୗ࡛ࡍࠋ
ᮏయ ࢥࢿࢡࢱࢣ࣮ࣈࣝྲྀᯈ
ࢼࢵࢺ ࢼࢵࢺ
4RoHSˋ
ᮏ〇ရࡣࠊRoHSᣦ௧Ḣᕞࠊ୰ᅜ㐺ྜࡋ࡚࠸ࡲࡍࠋ
୰ᅜ∧RoHSࡣࠊRoHSつไ್㛵ࢃࡽࡎྵ᭷ࢆ⾲
♧ࡋ࡚࠸ࡲࡍࠋ୰ᅜㄒཧ↷
ᮏ♫ࠉࠛ486-0901ࠉឡ▱┴᪥ᕷ∵ᒣ⏫2431-1
㸺ࢥ࣮ࣝࢭࣥࢱ࣭ࣇ࣮ࣜࢲࣖࣝ㸼
TEL㸸0120-394-205 FAX㸸0120-336-394
ཷ㛫㸸᭶᭙᪥ࡽ㔠᭙᪥ࡢ9㹼12࠾ࡼࡧ13㹼17
ణࡋࠊ⚃᪥ࠊᖺᮎᖺጞ➼ࢆ㝖ࡃ