Panasonic H-ES12060PP User manual

file:///C|/U...emp/Rar$EXa0.019/viewing/SGML_VIEW_DATA/ALL/H-ES12060PP/SVC/DSC1702007CE/doc/DSC1702007CE_cvr.xml[11/12/2018 10:33:20 AM]
ORDER NO.DSC1702007CE
B26
Interchangeable Lens for Digital Camera
Model No. H-ES12060PP
H-ES12060E
H-ES12060GK
© Panasonic Corporation 2017 Unauthorized copying and distribution is a violation of law.

file:///C|/Users/n.shetabi/AppData/Local/Temp/Rar$EXa0.019/viewing/SGML_VIEW_DATA/ALL/H-ES12060PP/SVC/DSC1702007CE/doc/DSC1702007CE_01.xml[11/12/2018 10:35:19 AM]
1 Safety Precautions
1.1 Information for Your Safety

file:///C|/Users/n.shetabi/AppData/Local/Temp/Rar$EXa0.019/viewing/SGML_VIEW_DATA/ALL/H-ES12060PP/SVC/DSC1702007CE/doc/DSC1702007CE_01.xml[11/12/2018 10:35:19 AM]
1.2 Cautions for use

file:///C|/Users/n.shetabi/AppData/Local/Temp/Rar$EXa0.019/viewing/SGML_VIEW_DATA/ALL/H-ES12060PP/SVC/DSC1702007CE/doc/DSC1702007CE_01.xml[11/12/2018 10:35:19 AM]

file:///C|/U...emp/Rar$EXa0.019/viewing/SGML_VIEW_DATA/ALL/H-ES12060PP/SVC/DSC1702007CE/doc/DSC1702007CE_02.xml[11/12/2018 10:36:27 AM]
2 Service Navigation
2.1 Introduction
This service manual contains technical information, which allow service personnel’s to understand and service this model
Please place orders using the parts list and not the drawing reference numbers.

2.2 Important Notice
2.2.1 About LENS MAIN UNIT (Ref. 220)
1. 
lens adjustments.

2. 
210), to maintain Serial number of owner's original lens. Fig. 1-1
3. No adjustment is required when replacing the part mentioned on Fig.1-1. But, when tighten the concerned screws,apply proper torque

file:///C|/U...emp/Rar$EXa0.019/viewing/SGML_VIEW_DATA/ALL/H-ES12060PP/SVC/DSC1702007CE/doc/DSC1702007CE_02.xml[11/12/2018 10:36:27 AM]
mentioned on "6. Disassembly and Assembly Instruction" section.

file:///C|/U...emp/Rar$EXa0.019/viewing/SGML_VIEW_DATA/ALL/H-ES12060PP/SVC/DSC1702007CE/doc/DSC1702007CE_03.xml[11/12/2018 10:38:02 AM]
3 Specifcations
3.1 Specifcations (Rated)

file:///C|/U...emp/Rar$EXa0.019/viewing/SGML_VIEW_DATA/ALL/H-ES12060PP/SVC/DSC1702007CE/doc/DSC1702007CE_03.xml[11/12/2018 10:38:02 AM]
3.2 Accessories

file:///C|/U...emp/Rar$EXa0.019/viewing/SGML_VIEW_DATA/ALL/H-ES12060PP/SVC/DSC1702007CE/doc/DSC1702007CE_04.xml[11/12/2018 10:38:55 AM]
4 Location of Controls and Components

file:///C|/U...emp/Rar$EXa0.019/viewing/SGML_VIEW_DATA/ALL/H-ES12060PP/SVC/DSC1702007CE/doc/DSC1702007CE_04.xml[11/12/2018 10:38:55 AM]

file:///C|/U...emp/Rar$EXa0.019/viewing/SGML_VIEW_DATA/ALL/H-ES12060PP/SVC/DSC1702007CE/doc/DSC1702007CE_05.xml[11/12/2018 10:42:29 AM]
5 Service Fixture & Tools
5.1 Service Fixture and Tools
The following Service Fixture and Tools are used for Checking & Servicing for this unit.
5.2 Clean Box

10,000 (Federal Standard 209D).
[NOTE]


file:///C|/U...emp/Rar$EXa0.019/viewing/SGML_VIEW_DATA/ALL/H-ES12060PP/SVC/DSC1702007CE/doc/DSC1702007CE_06.xml[11/12/2018 10:43:46 AM]
6 Disassembly and Assembly Instructions
6.1 Outline

Important:
1. It is recommended dealing with Clean Box, to keep maintaining the dustproof environment.
(Refef to "5.2. Clean Box " section of this Service Manual for details.)
2. To minimize the possibilities/risk of getting the dust/dirt on the lens surface, keep covering the lens unit with lens caps (front & rear), other
than necessary cases.
3. 
4. Blow off the dust on the surface of the lens with a blower brush.
5. Use lens cleaning KIT (BK)(VFK1900BK).
NOTE:
1. 
following.
Caution
Keep covering the lens unit with Lens caps (front & rear), other than necessary
cases.
6.2 Disassembly Flow Chart
6.3 Disassembly Procedure

file:///C|/U...emp/Rar$EXa0.019/viewing/SGML_VIEW_DATA/ALL/H-ES12060PP/SVC/DSC1702007CE/doc/DSC1702007CE_06.xml[11/12/2018 10:43:46 AM]
Important:


Less than class 10,000(Federal Standard 209D))
6.3.1 Removal of the Decoration Ring Unit
1. The Decoring Unit is sticked on the Filter Ring.
2. Put the sheet so that the lens glass is fullty covered.
3. 
6.3.2 Removal of the Filter Ring
1. Remove 3 screws (A) and the Filter Ring.
6.3.3 Removal of the Shading Frame
1. Remove 2 screws (B) and the Shading Frame.
6.3.4 Removal of the L Mount Unit

file:///C|/U...emp/Rar$EXa0.019/viewing/SGML_VIEW_DATA/ALL/H-ES12060PP/SVC/DSC1702007CE/doc/DSC1702007CE_06.xml[11/12/2018 10:43:46 AM]
1. Remove screw (C) and 3 screws (D).
2. Remove the L Mount Unit.
6.3.5 Removal of the Rear Frame Unit
1. Remove the Dustproof Rubber.
2. Disconnect the Connector of the Lens P.C.B..
3. Remove 3 screws (E) and the Rear Frame Unit.
6.3.6 Removal of the Lens P.C.B. Unit and the L Mount Contact Unit
1. Disconnect the 4 Connectors of the Lens P.C.B..

file:///C|/U...emp/Rar$EXa0.019/viewing/SGML_VIEW_DATA/ALL/H-ES12060PP/SVC/DSC1702007CE/doc/DSC1702007CE_06.xml[11/12/2018 10:43:46 AM]
2. Remove 2 screws (F) and the Lens P.C.B. with the L Mount Contact Unit.
3. Remove the L Mount Connect Unit from Lens P.C.B..
6.3.7 Removal of the Rear Frame Earth Spring
1. Remove screw (G) and the Rear Frame Earth Sprig.

file:///C|/U...emp/Rar$EXa0.019/viewing/SGML_VIEW_DATA/ALL/H-ES12060PP/SVC/DSC1702007CE/doc/DSC1702007CE_06.xml[11/12/2018 10:43:46 AM]
6.3.8 Removal of the Zoom Drive Pin and the Zoom Ring Unit
1. Remove screw (H) and the Zoom Drive Pin.
2. Remove the Zoom Ring Unit.
6.4 Assembly Flow Chart

file:///C|/U...emp/Rar$EXa0.019/viewing/SGML_VIEW_DATA/ALL/H-ES12060PP/SVC/DSC1702007CE/doc/DSC1702007CE_06.xml[11/12/2018 10:43:46 AM]
6.5 Assembly procedure
Important:
1. 
6.5.1 Installation of the Zoom Ring Unit and the Zoom Drive Pin
1. Install the Zoom Ring Unit and the Zoom Drive Pin.
2. 
6.5.2 Installation of the Rear Frame Earth Spring
1. Install the Rear Frame Earth Spring.

file:///C|/U...emp/Rar$EXa0.019/viewing/SGML_VIEW_DATA/ALL/H-ES12060PP/SVC/DSC1702007CE/doc/DSC1702007CE_06.xml[11/12/2018 10:43:46 AM]
2. 
6.5.3 Installation of the L Mount Contact Unit and the Lens P.C.B.
1. Connect FPC of the Mount Connect Unit to connector.
2. Installation the Main P.C.B. with the Mount Contact Unit.
3. 

file:///C|/U...emp/Rar$EXa0.019/viewing/SGML_VIEW_DATA/ALL/H-ES12060PP/SVC/DSC1702007CE/doc/DSC1702007CE_06.xml[11/12/2018 10:43:46 AM]
4. Connect FPCs to 4 connectors of the Lens P.C.B. Unit.
6.5.4 Installation of the Rear Frame Unit and the Dustproof Rubber
1. Install the Rear Frame Unit and the Dustproof Rubber.
2. 

file:///C|/U...emp/Rar$EXa0.019/viewing/SGML_VIEW_DATA/ALL/H-ES12060PP/SVC/DSC1702007CE/doc/DSC1702007CE_06.xml[11/12/2018 10:43:46 AM]
6.5.5 Installation of the L Mount Unit
1. Install the L Mount Unit.
2. 
6.5.6 Installation of the Shading Frame
1. Install the Shading Frame.
2. 