Panasonic 3E User manual

Available in the U.S. only for the K-12 market starting fall 2014.
Please read these instructions carefully before using this product, and save this manual for future use.
OPERATING INSTRUCTIONS
2-in-1 Computer
Model No. 3E

Read Me First
32
Available in the U.S. only for the K-12 market starting fall 2014.
Table of Contents
READ ME FIRST ......................3-17
Safety Precautions ..........................3-14
Regulatory Compliance Information ............15-17
GETTING STARTED ..................18-47
Package Contents.............................18
Separating Your Tablet Laptop ...................18
Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-21
Keyboard Dock Views .......................22-23
Using Your Computer .......................24-26
Handling and Maintenance ......................27
Basic Touch Screen Operations ............... 28-29
Windows Interface..........................30-35
Set up and Connection ......................36-42
Battery................................... 43-45
Specications .............................46-47
TROUBLESHOOTING .................48-51
APPENDIX ..........................52-59
Limited Use License Agreement ...............52-55
Limited Warranty ........................... 55-59
Safety Precautions
To reduce the risk of injury, loss of life, electric shock, re,
malfunction and damage to equipment or property, always
observe the following safety precautions.
Explanation of Symbol Word Panels
The following symbol word panels are used to classify and
describe the level of hazard, injury and property damage
caused when the denotation is disregarded and improper
use is performed.
DANGER
Denotes a potential hazard that will result in serious injury
or death.
WARNING
Denotes a potential hazard that could result in serious
injury or death.
CAUTION
Denotes a hazard that could result in minor injury.
NOTICE
Denotes a hazard that could result in property damage.

Read Me First Read Me First
54
Available in the U.S. only for the K-12 market starting fall 2014.
Safety Precautions
The following symbols are used to classify and describe the
type of instructions to be observed.
This symbol is used to alert users to a specic
operating procedure that must not be performed.
This symbol is used to alert users to a specic
operating procedure that must be followed in
order to operate the unit safely.
Attention: Teachers, Parents and
Adult Supervisors
This product is an educational tool designed for school
children, ages 6 and up. There must be supervision by
an adult of school children under 10 when using the 3E
Education PC. It is a must to have a thorough explanation
to students on safe and proper handling of the 3E Education
PC, power supply, battery pack and power cord.
BE SURE TO KEEP THE POWER CORD AWAY FROM
YOUNGER CHILDREN
Please ensure that students understand the following:
nAs with all electrical products, precautions should be
observed during handling and use to prevent electric
shock. The power supply (adaptor) should not be
handled by children.
nEmphasize to students that this device is an educational
tool and not a toy. The computer, power supply, battery
pack or power cord should not be dropped, crushed,
stepped on or otherwise abused.
nEnsure students understand the safe and proper handling
of power cord and power supply. Misuse could result in
serious injury.
nThe teacher, parent or adult supervisor should periodically
inspect the computer, power supply and power cord for
damage and replace it, if necessary.
nStudents should report any damage or loose parts to
their teacher, parent or adult supervisor, immediately.
nDo not leave the PC plugged in or “on” when enclosed
in a non-vented container, such as a school backpack,
as overheating may occur.
nIt is recommended that students should take a 5 minute
break every 30 minutes of use.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY
AN INCORRECT TYPE. DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS.

Read Me First Read Me First
76
Available in the U.S. only for the K-12 market starting fall 2014.
Safety Precautions
WARNING
Generation of heat, ignition or rupture of the battery
may result.
nDo Not Charge the Battery Using Methods
Other Than Those Specified
nDo Not Throw the Product Into a Fire or
Expose It to Excessive Heat
nDo Not Deform, Disassemble or Modify
This Product
nDo Not Apply Shocks to the Product by
Dropping It, Applying Strong Pressure to It, etc.
nAvoid Extreme Heat (Near the Fire, In Direct
Sunlight, for Example)
nWhen the Battery Has Deteriorated, Contact
Your Technical Support Office to Replace
the Battery
WARNING
Fire or electric shock may result.
nDo Not Do Anything That May Damage the
AC Cord, the AC Plug, or the AC Adaptor
Do not damage or modify the cord, place it
near hot tools, bend, twist, or pull it forcefully,
place heavy objects on it, or bundle it tightly.
➯Do not continue to use a damaged AC cord, AC
plug or AC adaptor, (contact support for repair.)
DANGER
When disposing the battery, generation of heat,
ignition or rupture of the battery may result.
Handling This Computer
nDo Not Disassemble the Computer Except
When Disposing of it
Handling The Built-in Battery
nDo Not Charge
nDo Not Use
nDo Not Throw the Battery Into a Fire or
Expose It to Excessive Heat
nDo Not Short the Positive (+) and Negative
(-) Contacts
nDo Not Apply Shocks to the Computer by
Dropping It, Applying Strong Pressure to It, etc.
nAvoid Extreme Heat (Near the Fire, In Direct
Sunlight, for Example)

Read Me First Read Me First
98
Available in the U.S. only for the K-12 market starting fall 2014.
Safety Precautions
• Unusually hot
➯After the above procedure, contact your
technical support ofce for repair.
nInsert the AC Plug Completely
➯Do not use a damaged plug or loose AC outlet.
nClean Dust and Other Debris off the AC Plug
Regularly
• If dust or other debris accumulates on the plug,
humidity, etc. may cause a defect in the insulation
WARNING
Burns or low-temperature burns may result.
nDo Not Use This Product in Close Contact
With Your Body For a Long Period of Time
➯Do not use this product with exposing the
skin to the heat source of this product or AC
adaptor for a long period of time.
nDo Not Touch The Surface of The AC Adaptor
Continuously While Using/Charging
• Burns may result.
Detrimental health effects on your body may result.
nDo Not Turn the Volume Up Too Loud When
Using Headphones
• Listening at high volumes that overstimulate
the ear for long periods of time may result in
loss of hearing.
WARNING
Fire or electric shock may result.
nDo Not Connect the AC Adaptor to a Power
Source Other Than a Standard Household
AC Outlet
➯ Connecting to a DC/AC converter (inverter)
may damage the AC adaptor. On an airplane,
only connect the AC adaptor/charger to an
AC outlet specically approved for such use.
nDo Not Pull or Insert the AC Plug If Your
Hands Are Wet
nDo Not Disassemble This Product
nDo Not Touch This Product In a Thunderstorm
If Connected with the AC Cable or Any Other
Cables
nDo Not Place Containers of Liquid or Metal
Objects on Top of This Product
➯ If foreign matter has found its way inside,
immediately turn the power off and unplug
the AC plug and remove the battery pack.
Then contact your technical support ofce.
nIf a Malfunction or Trouble Occurs, Immediately
Stop Use If the Following Malfunction Occurs,
Immediately Unplug the AC Plug
• This product is damaged
• Foreign object inside this product
• Smoke emitted
• Unusual smell emitted

Read Me First Read Me First
1110
Available in the U.S. only for the K-12 market starting fall 2014.
Safety Precautions
CAUTION
This product may fall over or drop, resulting in an injury.
nDo Not Place This Product on Unstable
Surfaces
nAvoid Stacking
Detrimental health effects on your body may result.
nTake a Break Of 10-15 Minutes Every Hour
• Using this product for long periods of time
may have detrimental health effects on the
eyes or hands.
CAUTION
Fire or electric shock may result.
nDo Not Move This Product While the AC Plug
Is Connected
➯If the AC cord is damaged, unplug the AC
plug immediately.
nDo Not Subject the AC Adaptor To Any
Strong Impact
➯Do not continue to use the AC adaptor after
a strong impact such as being dropped.
➯Contact your technical support ofce for repair.
nDo Not Leave This Product in a High Temperature
Environment for a Long Period of Time
• Leaving this product where it will be exposed
to extremely high temperatures such as near
re or in direct sunlight may deform the cabinet
and/or cause trouble in the internal parts.
nDo Not Keep This Product Wherever There
is a Lot of Water, Moisture, Steam, Dust, Oily
Vapors, etc.
nHold the Plug When Unplugging the AC Plug
nUse Only the Specified AC Adaptor With
This Product
➯Do not use an AC adaptor other than the one
supplied (supplied with the unit or one sold
separately as an accessory).

Read Me First Read Me First
1312
Available in the U.S. only for the K-12 market starting fall 2014.
• If the temperature is low, the operating time is shortened.
Only use the computer within the allowable temperature
range.
• Always power off the computer when it is not in use.
Leaving the computer on when the AC adaptor is not
connected will exhaust the remaining battery capacity.
THIS PRODUCT IS NOT INTENDED FOR USE AS, OR
AS PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR
TRAFFIC CONTROL EQUIPMENT/SYSTEMS, AIRCRAFT
COCKPIT EQUIPMENT/SYSTEMS, MEDICAL DEVICES
OR ACCESSORIES*1, LIFE SUPPORT SYSTEMS OR
OTHER EQUIPMENTS/DEVICES/SYSTEMS THAT ARE
INVOLVED WITH ENSURING HUMAN LIFE OR SAFETY.
PANASONIC WILL NOT BE RESPONSIBLE FOR ANY
LIABILITY RESULTING FROM THE USE OF THIS PRODUCT
ARISING OUT OF THE FOREGOING USES.
*1 As dened by the European Medical Device Directive (MDD) 93/42/EEC.
Panasonic cannot guarantee any specications, technologies,
reliability, safety (e.g. Flammability/Smoke/Toxicity/Radio
Frequency Emission, etc.) requirements related to aviation
standards that exceed the specications of our COTS
(Commercial-Off-The-Shelf) products.
Safety Precautions
NOTICE
• Do not place the computer near a television or radio receiver.
• Keep the computer away from magnets. Data stored on
the hard disk may be lost.
• This computer is not intended for the display of images for
use in medical diagnosis.
• This computer is not intended for a use with connection of
medical equipment for the purpose of medical diagnosis.
• Panasonic shall not be liable for loss of data or other
incidental or consequential damages resulting from the
use of this product.
• This computer prevents overcharging of the battery by
recharging only when the remaining power is less than
approx. 95% of capacity.
• The battery is not charged when the computer is rst
purchased. Be sure to charge it before using it for the rst
time. When the AC adaptor is connected to the computer,
charging begins automatically.
• Should the battery leak and the uid get into your eyes,
do not rub your eyes. Immediately ush your eyes with
clear water and see a doctor for medical treatment as
soon as possible.
• Recharging will not commence if internal temperature of
the battery pack is outside of the allowable temperature
range (0°C to 35°C). Once the allowable range requirement
is satised, charging begins automatically. Note that the
recharging time varies based on the usage conditions.
(Recharging takes longer than usual when the temperature
is 10°C or below.)
This computer is not intended for use in medical equipment
including life-support systems, air trafc control systems, or
other equipment, devices or systems that are involved with
ensuring human life or safety. Panasonic cannot be held
responsible in any way for any damages or loss resulting
from the use of this unit in these types of equipment, devices
or systems, etc.

Read Me First Read Me First
1514
Available in the U.S. only for the K-12 market starting fall 2014.
Regulatory Compliance Information
FCC Declaration of Conformity
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
nReorient or relocate the receiving antenna.
nIncrease the separation between the equipment
and receiver.
nConnect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
nConsult the dealer or an experienced radio/TV technician
for help.
This device meets the government’s requirements for
exposure to radio waves.
Safety Precautions
This computer has been designed so as to minimize shock
to the LCD and hard disk drive, but no warranty is provided
against such trouble. Therefore, as a precision instrument,
be extremely careful in the handling.

Read Me First Read Me First
1716
Available in the U.S. only for the K-12 market starting fall 2014.
USA Only: Disposal may be regulated in your community
due to environmental considerations. For disposal or
recycling information, please visit the Panasonic website:
http://www.panasonic.com/environmental
or call 1-888-769-0149.
A lithium ion battery that
is recyclable powers
the product you have
purchased. Please call
1-800-8-BATTERY for
information on how to
recycle this battery.
L’appareil que vous vous
êtes procuré est alimenté
par une batterie au lithium-
ion. Pour des reseignements sur le recyclage de la
batterie, veuillez composer le 1-800-8-BATTERY.
Regulatory Compliance Information
This device is designed and manufactured not to exceed
the emission limits for exposure to radio frequency (RF)
energy set by the Federal Communications Commission of
the U.S. Government, Industry Canada, and other national
regulatory agencies.
The exposure standard employs a unit of measurement
known as the Specic Absorption Rate, or SAR. Tests for
SAR are conducted using standard operating positions
accepted by the FCC with the device transmitting at its
highest certied power level in all tested frequency bands.
Although the SAR is determined at the highest certied
power level, the actual SAR level of the device while
operating can be well below the maximum value. This is
because the device is designed to operate at multiple
power levels so as to use only the power required to reach
the network. In general, the closer you are to a wireless
base station antenna, the lower the power output.
Equipment Authorization has been granted to this model
with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. SAR information on
this device is on le with the FCC and can be found under
the Display Grant section of www.fcc.gov/oet/ea/fccid after
searching the FCC ID: WL6-TLBC1IE1.
For questions related to the EMC performance of this
product, contact:
Elitegroup Computer Systems Co., Ltd
No.239, Sec. 2, Ti Ding Blvd., Taipei, Taiwan 11493
886-2162-1177

Getting Started Getting Started
1918
Available in the U.S. only for the K-12 market starting fall 2014.
Package Contents
Carefully unpack your box and take out the items listed as
below. If any of the items is missing or damaged, contact
your dealer immediately:
n1x Tablet n1x Magnifying lens
n1x Keyboard docking n1x Thermometer probe
n1x AC adaptor*1 n1x Operating Instructions
n1x Passive stylus
Separating Your Tablet laptop
1. Set your tablet laptop on a stable surface.
2. Hold the screen and push down the blue latch.
3. Detach the screen by pulling it upward
Getting Started
Layout
NO. NAME FUNCTION
1 Microphone Mainly for sound and speech recording.
2 Light sensor It detects the brightness of the environment.
3Front-facing
camera
Often for taking self-portraits as well as for video
conferencing.
4 Stylus slot This is where you can rest your stylus.
5 Speaker The sound system has two speakers for playing
music, notification sounds, and other audio data.
6Windows
button
Switches the screen between the Start screen and the
previously opened app/program.
7 I/O cabinet See page 21 for details.
8 Touchscreen It is a see-touch device: You look at it and also
touch it with your fingers to control the tablet.
Front
*1
FOR USE WITH MODEL NO. : WA-24K12FU
(Asian Power Devices Inc.)

Getting Started Getting Started
2120
Available in the U.S. only for the K-12 market starting fall 2014.
Layout
NO. NAME FUNCTION
1 Power lock Push here to power on/off or lock on/off your tablet.
2Screen
rotation lock
Push here to activate or cancel the screen rotating
function.
3Rear-facing
camera
The camera is mainly used when you are taking
photos or recording videos.
4Volume
up/down
Press here to increase or decrease the
sound volume.
Getting Started
NO. NAME FUNCTION
1 Micro HDMI port This is where you can connect your HDMI external
screen.
2Micro SD
card slot
This is where you can insert a Micro SD memory
card.
3Headphone
connector Here you can plug in a standard headphone.
4 USB 3.0 port This is for establishing a USB 3.0 connection.
5 Power port This is where you plug in the adaptor to charge your
tablet.
Back Left (I/O cabinet)

Getting Started Getting Started
2322
Available in the U.S. only for the K-12 market starting fall 2014.
Keyboard Dock Views
CONNECTORS AND INDICATORS
NO. NAME FUNCTION
1Docking
connector A connector where you dock your tablet.
2 DC jack A jack to connect the AC adaptor that supplies
power to the computer.
3 USB 2.0 port You can connect a USB 2.0 device here.
4
Battery
charging
indicator*
It lights up in amber when the battery is being
charged, and turns into blue when the battery is
fully charged.
Getting Started
Shortcut Keys
You can access certain system settings quickly by pressing
the appropriate function keys.
Press both the Fn key and one of the following shortcut
keys at the same time to perform your desired function.
Enable/disable the
Airplane mode to turn
off/on all wireless
communication.
Increases the
volume level.
Puts your computer
into sleep mode.
Allows you to select
your display mode
(an external monitor
required).
Mutes/unmutes the
audio output.
Decreases the
display brightness.
Decreases the
volume level.
Increases the
display brightness.
*Only devices equipped with keyboard docking battery

Getting Started Getting Started
2524
Available in the U.S. only for the K-12 market starting fall 2014.
Using Your Computer
Powering ON Your Computer
1. If this is the rst time you are
turning this computer on,
connect the AC adaptor and
fully charge the battery.
2. Press the power button.
3. A logo will appear when the
system is powered on.
Powering OFF Your Computer
Save all your data before powering your computer off.
To power off your system, you
can do one of the following:
A. By Charms
1. Slightly swipe from the right
edge of the screen. This
opens the Charms menu.
(For more about the Charms
menu, see page 33)
Getting Started
2. Touch Settings from the menu, and you will see a menu
as shown on page 24.
3. Click Power icon, and select Shut down.
B. Using the Power Button
Press and hold the power button for at least four seconds,
and you will see an instruction appear in the middle of the
screen, which is shown below.
Slide your nger on the screen downward, and the system
will power off itself.
Putting Your Tablet into Sleep Mode
When you will be away from your computer for a short time,
put the computer to sleep.
Do one of the following:
nWhen the keyboard is attached, close the display panel
or press Fn + F2.
nPress the power button.
nOpen the Charms menu and then select Settings →
Power →Sleep.
If the system freezes and hangs, you can press
the power button for more than 10 seconds to
reboot the system.

Getting Started Getting Started
2726
Available in the U.S. only for the K-12 market starting fall 2014.
Waking Up Your Computer
Do one of the following:
nPress the power button.
nPress the Windows button.
Locking or Unlocking the Screen Rotation
You can nd the rotation lock button on the left end
of the screen, as shown on the left.
A rst press on the button can lock the screen to
keep it from rotating when you tilt the tablet. And a
second press can unlock the function.
Stylus Operations
Your tablet is provided with a Passive
stylus. With the Passive stylus, you
can perform all the one-nger gestures
shown on pages 28 and 29.
Getting Started
Handling and Maintenance
Operation Environment
nPlace the computer on a at stable surface not subject to
shock, vibration, and danger of dropping. Do not place the
computer upright or turn it over. If the computer is exposed
to an extremely strong impact, it may become damaged.
Operating Environment
Temperature:
Operation: 0°C to 35°C (IEC60068-2-1, 2)*1
Storage: -20°C to 60°C {-4°F to 140°F}
Humidity:
Operation: 30% to 80% RH (No condensation)
Storage: 30% to 90% RH (No condensation)
Even within the above temperature/humidity ranges,
operation for a long time in extreme environments, smoking
nearby, or operation in places where oil is used or where
there is a lot of dust will result in product deterioration and
will shorten the product life.
*1 Do not expose the skin to this product when using the product in a hot or
cold environment.
If the computer is wet in temperatures of 0°C {32°F} or
below, freeze damage may occur. Make sure to dry off the
computer in such temperatures.
nDo not place the computer in the following areas,
otherwise the computer may be damaged.
–Near electronic equipment. Image distortion or noise
may occur.
–In extremely high or low temperature.
nAs the computer can become hot during operation, keep
it away from items that are sensitive to heat.
Note: It is recommended that you put your
computer to sleep before you move it.

Getting Started Getting Started
2928
Available in the U.S. only for the K-12 market starting fall 2014.
or
x2
Basic Touch Screen Operations
The monitor is a touch screen. You can use your ngers or
a touch pen to perform many actions on it.
nDon’t use sharp objects to touch the screen. Or the
screen may be damaged or scratched.
nDon’t touch the touch screen with a conductive material.
It may cause a malfunction.
nThe supported functions are application dependent.
Getting Started
GESTURE NAME EXPLANATION
Tap
Touch once on an item to start an app, open a link,
or perform an optional function. This is similar to a
left-click with a mouse.
Double-tap
Slightly press twice with your finger to select an item
Press and hold
Press and leave your finger on an item. This brings
up detailed information or opens a menu with more
options for the item. This is similar to a right-click
with a mouse.
GESTURE NAME EXPLANATION
Pinch
Move two fingers together or apart while touching
the screen. This is to zoom in and out on visual apps,
such as pictures and maps.
Rotate
Place two or more fingers on an item and then turn
your hand. This enables you to turn an object. (Note:
Not all items can be rotated, depending on the app.)
Slide
Drag your finger across the screen. This can scroll
through lists and pages, and can also move an
object or be used to draw or write, depending upon
your apps.
Two-finger-slide
Moves up/down, left/right. This is the same function
as scrolling your mouse.
Swipe
Start from any edge of the screen, and then swipe
toward the center of the screen.

Getting Started Getting Started
3130
Available in the U.S. only for the K-12 market starting fall 2014.
Windows Interface
START SCREEN
When you turn on the computer, the Start screen is displayed,
which allows you to access many features and installed
applications (also referred to as apps) at one glance.
1 Apps These bricks are the shortcuts for respective
applications.
2User
account The currently used user account.
3 Charms See page 33 for detailed information.
DESKTOP
In Windows 8.1, the Desktop is treated as an app. You can nd
and activate it from your Start screen and All Apps screen.
1 Taskbar Allows you to add toolbars that hold extra buttons
and menus.
2 Notification area Shows you the current system status and
notifications.
3 Program area This is where you can place a shortcut icon for your
desired application.
4 Charms See page 33 for detailed information.
Getting Started
3 2
4
1

Getting Started Getting Started
3332
Available in the U.S. only for the K-12 market starting fall 2014.
CUSTOMIZING YOUR TASKBAR
Right-click (or press and hold using your nger) on a blank
part of the taskbar, and a pop-up menu leaps out. In the
menu, select Toolbars and you can see following ve
toolbar options:
Address By choosing this, part of your taskbar becomes a place
for typing website addresses where you want to visit.
Links This adds quick access to your favorite websites listed in
your Internet Explorer’s Favorites menu.
Touch Keyboard This is for tablet owners and can add a button that brings
a keyboard to the forefront for touch-typing on the screen.
Desktop
This adds quick access to all your PC’s resources,
allowing you to browse through files, folders, libraries,
network locations, and Control Panel menus.
New Toolbar This lets you create a toolbar from any folder’s contents.
THE CHARMS MENU
This menu consists of ve options that are called Charms
and provide quick access to various aspects of Windows
8.1. To display the Charms, do one of the following:
nMove the pointer to the upper-right
or lower-right corner
nUse one nger to swipe in from the
right edge of the screen
nWhen the keyboard is attached,
press Windows key + C
The Five Charms Are:
Search Search for a program or file. Simply enter a keyword
in the Search Charm and start search. It also enables
you perform a search within an app or on the Web.
Share
This Charm is for you to transfer and share a
picture or file with another user.
Start nIf you are not in the Start screen, this allows
you to return to the Start screen.
nIf you are in the Start screen, this allows you
to return to the previous screen, which could
be an app or the Desktop.
Device This enables you to operate directly a desired
device. You can import pictures from a digital
camera, stream a video to your TV, or transfer
files to a device listed on the screen.
Settings
This enables you to perform basic tasks such as
adjusting the volume, turning off the PC, etc.
Getting Started

Getting Started Getting Started
3534
Available in the U.S. only for the K-12 market starting fall 2014.
ALL APPS
In the Start screen, touch any blank area and slightly
drag upward.
A screen will appear similar to what is as shown below.
SWITCHING BACK TO START SCREEN
For switching back to the Start screen, do one of the following:
nMove the mouse cursor to the lower-left corner, and
click the Windows icon.
nPress the Windows key on your keyboard or tap the
Windows button on your tablet.
nClick the Windows icon in the Charms bar.
Getting Started

Getting Started Getting Started
3736
Available in the U.S. only for the K-12 market starting fall 2014.
Set up and Connection
WINDOWS ACTIVATION
When you turn the computer on for the rst time, the Windows
activation screen may appear. Follow the instructions on the
screen to register and activate your computer.
If you fail to activate and want to retry, do the following:
1. Open the Charms and click Settings > Change PC Settings.
2. Click Activate Windows from the left column.
3. Follow the instructions to activate.
CONFIGURING YOUR MICROSOFT ACCOUNT
To share les or settings with other devices running
Windows 8.1, you need to set up a Microsoft Account.
Furthermore, if you want to download or purchase apps
from the Microsoft Store, a Microsoft Account is required.
To set up a Microsoft account
1. Open the Charms and click Settings > Change PC Settings.
2. Click Users > Your account > Switch to a Microsoft account.
3. Follow the instructions to register your account information.
Getting Started

Getting Started Getting Started
3938
Available in the U.S. only for the K-12 market starting fall 2014.
SET UP YOUR START SCREEN
Adding an App
To add an app:
1. Open the All Apps screen.
2. Drag the top or bottom of
the screen inward, and an
option menu appears at the
bottom of the screen.
3. Touch the icon named Customize in the menu.
4. Touch the app that you want to add to your Start screen.
The available options will appear in the right side of the
option menu.
5. Click “Pin to Start” to add the app to your Start
screen.
Removing an App
To remove an app:
1. In the Start screen or All Apps screen, drag the top or
bottom of the screen inward. An option menu is activated
at the bottom of your screen.
2. Touch the icon named Customize in the menu.
3. Touch the app that you want to remove from the Start
screen. The available options will appear in the right side
of the option menu
4. Click “Unpin from Start” to remove it from the Start
screen.
WIRELESS LAN
Enabling Wireless Connection
To do this, do one of the following:
nWhen the keyboard is attached,
press Fn+F1 to activate the
wireless networking function.
nOpen the Charms and select
Settings to open the Network
conguration page, and then
toggle the Airplane mode switch to Off.
To conrm that Airplane mode is disabled, go to the desktop
and check the notication area. If you see an airplane icon
displayed on the lower right, then Airplane mode is on.
Otherwise, wireless function is enabled.
Connecting to a Wireless LAN
Once the wireless has been enabled,
the computer automatically scans for
available wireless networks and displays
them in the wireless LAN network list.
To connect to your desired wireless
network, click the network’s name in
the list, and then click Connect.
Getting Started
or
Note: Some networks require a network security
key or password for connection. If necessary,
ask the network administrator or the Internet
service provider (ISP) for the required information.