Panasonic DMR-EZ28K User manual

Basic Operations
P15
Operating Instructions
DVD Recorder
Model No. DMR-EZ28
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions completely.
Please keep this manual for future reference.
Region number supported by this unit
Region numbers are allocated to DVD players and DVD-Video according to where they are sold.
The region number of this unit is “1”.
The unit will play DVDs marked with labels containing “1” or “ALL”.
•
•
Example:
1ALL 24
1
If you have any questions contact
In the U.S.A.:1-800-211-PANA(7262)
In Canada: 1-800-561-5505
For U.S.A. only
The warranty can be found on page 79.
For Canada only
The warranty can be found on page 79.
La referencia rápida en español se encuentra en la página 80-83.
PPC RQT9046-P
00Cover.indd100Cover.indd1 2007/12/0719:00:032007/12/0719:00:03

2
RQT9046
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PRODUCT DAMAGE,
DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE,
DRIPPING OR SPLASHING AND THAT NO OBJECTS
FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE
PLACED ON THE APPARATUS.
USE ONLY THE RECOMMENDED ACCESSORIES.
DO NOT REMOVE THE COVER (OR BACK); THERE
ARE NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
•
•
•
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,
BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE.
ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT
RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO
OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
(Inside of product)
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines
for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
The socket outlet shall be installed near the equipment and
easily accessible. The mains plug of the power supply cord shall
remain readily operable. To completely disconnect this apparatus
from the AC Mains, disconnect the power supply cord plug from
AC receptacle.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
FCC Caution: To assure continued compliance, follow the
attached installation instructions and use only shielded interface
cables when connecting to peripheral devices.
Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority
to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
Declaration of Conformity
Trade Name: Panasonic
Model No.: DMR-EZ28
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-7262
•
•
•
•
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended
by the manufacturer. Dispose of used batteries according to
the manufacturer’s instructions.
Precautions
DMR-EZ28-PPC(RQT9046-P).indb2DMR-EZ28-PPC(RQT9046-P).indb2 2007/12/0715:25:182007/12/0715:25:18

3
Getting Started
RQT9046
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions
listed below. Keep these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider
than the other. A grounding-type plug has two blades and
a third grounding prong. The wide blade or the third prong
are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or
when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Unit Care
The precision parts in the unit are readily affected by the
environment, especially temperature, humidity, and dust.
Cigarette smoke also can cause malfunction or breakdown.
Do not place the unit on
amplifiers or equipment
that may become hot.
The heat can damage the unit.
Do not place any heavy
objects on top of the unit.
•
•
The unit should not be mounted in a vertical position. It’s designed
to operate in the horizontal position.
Before moving the unit, ensure the disc tray is empty.
Failure to do so will risk severely damaging the disc and the unit.
•
•
■Cautions about condensation
Condensation can cause unreliable playback of recordings.
Condensation may form in the following cases,
The unit is brought from cold surroundings into a well-heated room.
The unit is suddenly brought from cool surroundings, such as an
airconditioned room or car, to a place which is hot and humid.
During rainy seasons.
In any of the above-mentioned conditions, do not operate the unit for
at least 2 hours. The unit is not equipped with a moisture sensor.
•
•
•
■Maintenance
To clean the unit
Wipe with a soft, dry cloth.
Never use alcohol, thinner or benzine to clean the unit.
Before using chemically treated cloth, carefully read the instructions
that came with the cloth.
To clean the DVD lens
Dust and dirt may adhere to the unit’s lens over time, possibly making
it impossible to record or play discs.
Use the DVD lens cleaner about once every year, depending on
frequency of use and the operating environment.
Carefully read the lens cleaner’s instructions before use.
DVD lens cleaner: RP-CL720PP
•
•
■ When the unit is not to be used for a long time
To save power, unplug the AC power supply cord from the household AC outlet. This unit consumes a small amount of power, even when it is
turned off.
Standby power consumption
Front Display (➔52)
Automatic Bright
Quick Start (➔49) On Approx. 14.1 W Approx. 14.1 W
Off Approx. 0.9 W Approx. 2.5 W
DMR-EZ28-PPC(RQT9046-P).indb3DMR-EZ28-PPC(RQT9046-P).indb3 2007/12/0715:25:182007/12/0715:25:18

4
RQT9046
Table of Contents, Accessories
Getting Started
Precautions.............................................................................2
IMPORTANT SAFETY INSTRUCTIONS ................................3
Unit Care ......................................................................................3
Accessories..................................................................................5
Remote Control Information .........................................................5
Control Reference Guide........................................................6
Main Unit ......................................................................................6
Remote Control ............................................................................6
Rear Panel ...................................................................................7
The Unit’s Display ........................................................................7
Media Handling.......................................................................7
Inserting Discs .............................................................................7
Inserting an SD Card ...................................................................7
Inserting USB memory.................................................................7
Basic Connection....................................................................8
Connecting to a Television with Direct Cable or Antenna
(No Cable Box or Satellite Receiver)........................................8
Connecting to a Television and a Cable Box ................................9
Connecting to a Television and a Satellite Receiver...................10
Connecting to a TV with an HDMI (High Definition Multimedia
Interface) Cable......................................................................11
Setting the Channels and Clock ...........................................12
Acquiring the setting information from the TV (VIERA) ..............14
Basic Operations
Watching Television ........................................................... 15
Playback ............................................................................ 16
Playing Discs ............................................................... 16
Recording Television Programs ......................................... 17
Scheduled Recording ........................................................ 18
Deleting Recordings .......................................................... 19
Delete Navigator .......................................................... 19
Delete Recordings During Playback ............................ 19
Advanced Features
Important Notes for Recording ............................................20
Advanced Recording ............................................................21
Recording Modes and Estimated Disc Recording Time.............21
When the format confirmation screen is displayed.....................21
When removing a Recorded Disc ..............................................21
Selecting Audio Channels to record...........................................22
Specifying the Recording Time ..................................................22
Flexible Recording......................................................................22
Playing while you are recording .................................................23
Advanced Scheduled Recording ..........................................23
To cancel a scheduled recording in progress.............................23
Check, Change, or Delete Programs .........................................23
To release the unit from recording standby
(Before recording starts) ............................................................24
Recording from an External Device......................................24
Recording from a VCR, etc.........................................................24
Recording from a DV Camcorder ...............................................25
Advanced Playback ..............................................................26
Zoom in on video........................................................................26
Menu Screens on the TV............................................................26
Selecting Recordings to Play .....................................................26
Search........................................................................................26
Skip ............................................................................................26
Direct Play..................................................................................26
Quick View (Play x1.3) ...............................................................27
Slow-motion Play........................................................................27
Frame-by-Frame Viewing ...........................................................27
Time Slip ....................................................................................27
CM Skip......................................................................................27
Create Chapters.........................................................................27
Changing Audio during Playback ...............................................27
Playing MP3s........................................................................28
Playing DivX .........................................................................29
Playing Still Pictures (JPEG) ................................................30
Playing Playlists....................................................................32
Playlist Properties/View Chapters ..............................................32
Status Messages..................................................................32
Entering Text.........................................................................33
FUNCTIONS Window........................................................ 33
Linked Operations with the TV (VIERA Link™ “HDAVI Control™”) ... 34
Easy Control only with VIERA Remote Control....................... 35
Advanced Editing
Recordings-Editing ...............................................................36
Accessing the Recording View...................................................36
Editing Operations to Recordings ..............................................36
Chapters-Creating, Editing ...................................................38
Accessing the Chapter View ......................................................38
Chapter Operations....................................................................38
Still Pictures-Editing..............................................................39
Accessing the Album/Picture View.............................................39
Album/Picture Operations ..........................................................39
Deleting Still Pictures............................................................40
Delete Navigator ........................................................................40
Copying Still Pictures............................................................41
Copying Still Pictures via the Album View Screen......................41
Importing still pictures from an SD card or USB memory ..........41
Setting Menus
Setting DVD On-Screen Menus............................................42
Accessing the DVD On-Screen Menus ......................................42
DVD and Card Management ................................................43
Accessing the Management Menus ...........................................43
Setup Menus ........................................................................46
Set Channels Automatically .......................................................46
Set Channels Manually ..............................................................46
Surf Mode...................................................................................47
Parental Rating...........................................................................47
Off Timer ....................................................................................48
Remote Control ..........................................................................48
Clock Settings ............................................................................48
Quick Start .................................................................................49
DivX Registration .......................................................................49
Restore Default Settings ............................................................49
Settings for Playback..................................................................49
Settings for Recording................................................................50
Still Mode (paused video)...........................................................50
Black Level Control ....................................................................50
Dynamic Range Compression ...................................................51
Multi-channel TV Sound (Analog) ..............................................51
Multi-channel TV Sound (Digital)................................................51
Digital Audio Output ...................................................................51
Select Audio Channel For DV Input............................................52
Status Messages........................................................................52
On-screen Language .................................................................52
Black Background (Analog)........................................................52
Front Display ..............................................................................52
Closed Caption...........................................................................53
TV Aspect...................................................................................53
4:3 TV settings for DVD-Video....................................................54
4:3 TV settings for DVD-RAM.....................................................54
Component Output Signal..........................................................54
Functions of HDMI .....................................................................54
Other Settings
Other Settings.......................................................................56
Using the Unit’s Remote Control to Operate the TV and the Set
Top Box (Cable Box, Satellite Receiver, etc.) .............................56
Parental Rating List ..............................................................58
DMR-EZ28-PPC(RQT9046-P).indb4DMR-EZ28-PPC(RQT9046-P).indb4 2007/12/0715:25:192007/12/0715:25:19

5
Getting Started
RQT9046
Reference
Adding a Video Cassette Recorder (VCR) ...........................59
Connecting to a Television and a VCR (No Cable Box or Satellite Receiver) ....59
Connecting to a Television, a Cable Box and a VCR..................59
Connecting to a Television, a Satellite Receiver and a VCR ......59
Connection Options for Improved Playback Quality .............60
Using an S Video Cable for Better Video
(S Video Cable not included)..................................................60
Using Component Cables for Better Video
(Component Video Cables not included)................................60
Using an Audio Cable for Better Sound
(Audio Cable not included).....................................................60
Using an Optical Digital Audio Cable for Better Sound
(Optical Digital Audio Cable not included)..............................60
Using an HDMI (High Definition Multimedia Interface) Cable ....61
Using an RF Modulator.........................................................61
Disc Information....................................................................62
Usable Discs for Recording and Playback .................................62
Play-only Discs...........................................................................63
Discs that Cannot be Played......................................................63
Media Care.................................................................................63
SD Card and USB Memory Information ...............................64
USB memories you can use with this unit..................................64
SD Cards Usable with this Unit ..................................................64
MP3s, DivXs and Still Pictures (JPEG) ................................65
MP3 File Information ..................................................................65
Still Picture (JPEG) Information .................................................65
DivX File Information..................................................................65
Frequently Asked Questions.............................................. 66
Setup..........................................................................................66
Discs ..........................................................................................66
USB............................................................................................66
Recording...................................................................................67
Language code list ...............................................................67
Error Messages ................................................................. 68
On the Unit’s Display..................................................................68
On the TV...................................................................................69
Product Service ....................................................................69
Product information ....................................................................69
Troubleshooting Guide....................................................... 70
If the Antenna Connector doesn’t Match....................................70
To Reset this Unit .......................................................................70
General Issues: Power ...............................................................70
General Issues: Operation .........................................................71
General Issues: Displays............................................................72
General Issues: USB..................................................................72
General Issues: VIERA Link .......................................................73
Playback Issues: Picture ............................................................73
Playback Issues: Sound .............................................................74
Playback Issues: Operation........................................................74
Recording Issues: Recording / Scheduled Recording / External Input ....75
Editing Issues: DVD & SD ..........................................................76
Editing Issues: Still Pictures .......................................................76
Glossary ...............................................................................77
Specifications .......................................................................78
Limited Warranty...................................................................79
Limited Warranty (ONLY FOR U.S.A.)........................................79
Limited Warranty (ONLY FOR CANADA) ...................................79
Referencia rápida en espanõl (Spanish Quick Reference)...80
Index....................................................................... Back cover
Accessories
Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts.
(Product numbers correct as of December 2007. These may be subject to change.)
Only for the U.S.A.: To order accessories, refer to “Accessory Purchases” on page 79.
Only for Canada: To order accessories, call the dealer from whom you have made your purchase.
1 Remote control (N2QAYB000196) 2 Batteries for remote control
1 75 Ωcoaxial cable (K2KZ2BA00001) 1 Audio/video cable (K2KA2BA00003)
1 AC power supply cord (K2CB2CB00018)
For use with this unit only. Do not use it with
other equipment. Also, do not use cords for
other equipment with this unit.
•
(U.S.A. only)
Product Registration Card
Please complete and return the included product registration card, or register via the Internet at: http://www.prodreg.com/panasonic/
(Canada only)
The enclosed Canadian French label sheet corresponds to the English display on the front and back sides of the unit.
Remote Control Information
About batteries
Insert so the poles (+ and –) match those in the remote control.
Do not use rechargeable type batteries.
R6/LR6, AA
Do not mix old and new batteries.
Do not use different types at the same time.
Do not heat or expose to flame.
Do not leave the batteries in an automobile exposed to direct
sunlight for a long period of time with doors and windows closed.
Do not take apart or short circuit.
Do not attempt to recharge alkaline or manganese batteries.
Do not use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long period
of time. Store in a cool, dark place.
•
•
•
•
•
•
•
•
•
Using the remote control
Aim at the sensor, avoiding obstacles, up to a maximum range of
7 m (23 feet) directly in front of the unit.
20
20
30
30
Basic Operations
Advanced FeaturesAdvanced EditingSetting MenusOther Settings
ReferenceEspanõl
DMR-EZ28-PPC(RQT9046-P).indb5DMR-EZ28-PPC(RQT9046-P).indb5 2007/12/0715:25:202007/12/0715:25:20

6
RQT9046
Main Unit
Opening the front panel
Pull down
USB
CH REC
/ 1.3 RESET SD CARD IN2
DV IN S VIDEO VIDEO
L/MONO-AUDIO-R
2456789bk
The unit’s display
Remote control
signal sensor
1Disc tray
3bl
1POWER on/off button (POWER ^/I)......... (➔12)
Press to switch the unit from on to standby mode or vice versa.
In the standby mode, the unit is still consuming a small amount
of power.
2DV IN terminal
(for a digital video Camcorder) ................. (➔25)
3IN2 input terminals (IN2) .......................... (➔24)
4SD Card slot ............................................... (➔7)
•
5USB port ..................................................... (➔7)
6Reset button ............................................. (➔70)
7Stop button ............................................... (➔16)
8Play/x1.3 button ........................................ (➔16)
9Channel Select button .............................. (➔15)
bk Recording button ...................................... (➔17)
bl Disc tray open/close button ........................ (➔7)
Remote Control
1
4
5
7
6
3
9
bp
bq
bt
ck
cl
cm
8
bo
br
bs
bk
bl
bm
bn
cp
cq
cn
co
cr
2
1 Turn the unit on or off.............................................. (➔12)
2 Select the drive (DVD, SD or USB) .........(➔19, 28 to 30)
3 Select channels and recording numbers etc./
Enter numbers ........................................................ (➔15)
4 Delete
5 Basic operations for recording and play
6 Skip the specified time............................................ (➔27)
7 Direct Navigator ................................................ (➔26, 36)
8 Selection/OK, Frame-by-frame......................... (➔12, 27)
9 Show sub menu................................................ (➔26, 36)
bk Select audio ...................................................... (➔22, 27)
[A] for Recordings screen ....................................... (➔19)
bl Show on-screen menu............................................ (➔42)
[B] for Album View screen....................................... (➔30)
bm Start recording ........................................................ (➔17)
bn Change recording mode......................................... (➔17)
bo Transmission window
bp TV and Set Top Box operations.............................. (➔56)
bq Channel select........................................................ (➔15)
br Input select (TV, IN1, IN2, DV)................................ (➔24)
bs Sub channel access for digital broadcasts............. (➔15)
bt Favorite ................................................................... (➔15)
ck Skip 1 minute forward............................................. (➔27)
cl Show scheduled recording list................................ (➔18)
cm Show FUNCTIONS window ................................... (➔33)
cn Return to previous screen
co Show setup menu................................................... (➔46)
cp Create chapters ...................................................... (➔27)
cq Show status messages..................................... (➔31, 32)
cr Start Flexible Recording ......................................... (➔22)
Control Reference Guide
DMR-EZ28-PPC(RQT9046-P).indb6DMR-EZ28-PPC(RQT9046-P).indb6 2007/12/0715:25:222007/12/0715:25:22

7
RQT9046
Getting Started
Rear Panel
PR
PB
Y
RF
OUT
RF
IN
COMPONENT
VIDEO OUT
VHF/UHF
AC IN
OPTICAL
DIGITAL AUDIO OUT
(PCM / BITSTREAM)
R-AUDIO-L VIDEO S VIDEO
IN1 OUT
AV OU T
bl bk 9 8
56 7
32 4 1
1 AC IN~ = Power supply
2 Cooling fan
3 RF input terminal .................................. (➔8, 9)
4 RF output terminal ................................ (➔8, 9)
5 AUDIO/VIDEO input terminal ............. (➔9, 10)
6 S VIDEO input terminal
7 Digital audio output terminal................... (➔60)
8 HDMI AV OUT terminal .................... (➔11, 61)
9 S VIDEO output terminal ........................ (➔60)
bk AUDIO/VIDEO output terminal ........ (➔8 to 10)
bl COMPONENT VIDEO OUT terminal ..... (➔60)
The Unit’s Display
12
345
1Recording indicator
2Main display section
3Disc indicator
This indicator lights up when a disc that is supported by this
unit is inserted.
4Scheduled recording indicator (➔18)
On:
When a scheduled recording program is registered and a
recordable disc is inserted.
Flashes:
The scheduled recording indicator flashes when the unit
cannot go to scheduled recording standby (e.g. there is no
disc, etc).
It does not flash if Quick Start is off.
5Progressive indicator
This indicator lights up when you select “24p” in
“Progressive/24p” (➔43).
Inserting Discs
; OPEN/CLOSE
to open the tray.
Insert a disc.
Press [;OPEN/CLOSE] again to close the
tray.
Insert label-up.
–
–
Notes
When using 8 cm (3˝) DVD-RAM or 8 cm (3˝) DVD-R, remove the
disc from the cartridge.
It is not possible to record or play continuously from one side of a double
sided disc to the other. You will need to eject the disc and turn it over.
The unit may take some time to respond to [;OPEN/CLOSE].
Inserting an SD Card
ADAPTER
Opening the front panel (➔6)
Inserting the card
Press on the center of
the card until it clicks
into place.
If you are using a miniSD card/
microSD card, insert it into the
card adaptor that comes with
the card.
Insert and remove this adaptor
from the unit.
Insert the card label up with the
cut-off corner on the right.
Removing the card
Press on the center of the card
and pull it straight out.
Notes
When “SD” is flashing or when copying a picture or displaying the
Album in the SD card, do not turn off the unit or remove the SD card.
Such action may result in malfunction or loss of the card’s contents.
Inserting USB memory
You can insert the USB memory directly into the USB port.
Preparation
Before inserting any USB memory to this unit, ensure that the data
stored in it has been backed up.
Opening the front panel (➔6)
Inserting the USB memory
Check the orientation of the USB
connector and insert it straight in.
Removing the USB memory
Complete all USB memory-
related operations and pull the
USB memory straight out.
When “uSb” (USB) is flashing
on the unit’s display, do not
turn off the unit or remove the
USB memory.
Notes
There are few USB memory devices that cannot be connected.
Some USB devices inserted into this unit may cause this unit to stop
operating. Such USB devices cannot be used on this unit.
Confirm that “uSb” (USB) appears on the unit’s display when a
compatible USB memory is inserted while stopped.
If a USB memory being accessed is pulled out, then the data may
be damaged.
•
•
•
•
•
•
•
Media Handling
DMR-EZ28-PPC(RQT9046-P).indb7DMR-EZ28-PPC(RQT9046-P).indb7 2007/12/0715:25:232007/12/0715:25:23

8
RQT9046
The connection diagrams represent typical installations. These diagrams may not work with certain inhouse cable
systems, master antenna installations, or situations where TV programming is delivered using methods that differ from
industry accepted practices. If you require assistance with connections, please contact Panasonic at 1-800-211-7262
(for U.S.A.) or 1-800-561-5505 (for Canada).
Connecting to a Television with Direct Cable or Antenna (No Cable Box or Satellite Receiver)
If your TV does not have AV IN terminals (➔ 61).
Note: The terminals on the rear of your TV may not appear as shown below.
Please read terminal labels carefully to ensure correct connections.
VHF/UHF
RF IN
Rear of TV
Rear of this unit
AUDIO IN
R L
VIDEO
IN
step
2
Red White Yellow
step
4
step
1
step
3
Red White Yellow
To a household AC outlet
(AC 120 V, 60 Hz)
75 Ω coaxial cable from the wall or antenna signal to the “RF IN” on the unit.
75 Ω coaxial cable (included) from the “RF OUT” on the unit to the “VHF/UHF RF IN” on the TV.
Audio/video cable (included) from the “OUT” on the unit to the “AV IN” on the TV.
AC power supply cord (included) from the “AC IN~” on the unit to a household AC outlet.
•
Basic Connection
Cable from the wall or
antenna signal
DMR-EZ28-PPC(RQT9046-P).indb8DMR-EZ28-PPC(RQT9046-P).indb8 2007/12/0715:25:252007/12/0715:25:25

9
Getting Started
RQT9046
Connecting to a Television and a Cable Box
Please check with your Cable Service Provider to verify whether the coaxial cable from the Cable Wall Jack must be
connected to your Cable Box first, before connecting to other devices.
Consult your cable service provider about the appropriate cable box to use.
Additional coaxial cable and audio/video (AV) cable are required.
If your TV does not have AV IN terminals (➔ 61).
Note: The terminals on the rear of your TV and Cable Box may not appear as shown below.
Please read terminal labels carefully to ensure correct connections.
VHF/UHF
RF IN
AUDIO IN
R L
VIDEO
IN
Rear of TV
AUDIO OUT
R L
VIDEO
OUT
RF IN RF OUT
step
3
step
1
step
2
step
6
Red White Yellow
Red White Yellow
step
4
step
5
Red White Yellow
Red White Yellow
Rear of Cable Box
Rear of this unit
Cable from the wall
To a household AC outlet
(AC 120 V, 60 Hz)
75 Ωcoaxial cable from the wall to the “RF IN” on the unit.
75 Ωcoaxial cable (included) from the “RF OUT” on the cable box to the “VHF/UHF RF IN” on
the TV.
Audio/video cable (included) from the “OUT” on the unit to the “AV IN” on the TV.
75 Ωc oaxial cable from the “RF OUT” on the unit to the “RF IN” on the cable box.
Audio/video cable from the “AV OUT” on the cable box to the “IN1” on the unit.
AC power supply cord (included) from the “AC IN~” on the unit to a household AC outlet.
•
•
•
DMR-EZ28-PPC(RQT9046-P).indb9DMR-EZ28-PPC(RQT9046-P).indb9 2007/12/0715:25:262007/12/0715:25:26

10
RQT9046
Basic Connection
Connecting to a Television and a Satellite Receiver
Consult your satellite service provider about the appropriate satellite receiver to use.
Additional coaxial cable and audio/video (AV) cable are required.
If your TV does not have AV IN terminals (➔ 61).
Note: The terminals on the rear of your TV and Satellite Receiver may not appear as shown below.
Please read terminal labels carefully to ensure correct connections.
Rear of TV
VHF/UHF
AUDIO OUT
R L
VIDEO
OUT
SATELLITE IN RF OUT
VHF/UHF
RF IN
AUDIO IN
R L
VIDEO
IN
step
3
step
2
step
5
Red White Yellow
Red White Yellow
step
4
Red White Yellow
Red White Yellow
step
1
Rear of Satellite Receiver
Rear of this unit
Satellite
antenna
To a household AC outlet
(AC 120 V, 60 Hz)
75 Ωcoaxial cable from the satellite antenna to the “SATELLITE IN” on the satellite receiver.
75 Ωcoaxial cable (included) from the “RF OUT” on the satellite receiver to the “VHF/UHF RF
IN” on the TV.
Audio/video cable (included) from the “OUT” on the unit to the “AV IN” on the TV.
Audio/video cable from the “AV OUT” on the satellite receiver to the “IN1” on the unit.
AC power supply cord (included) from the “AC IN~” on the unit to a household AC outlet.
•
•
•
DMR-EZ28-PPC(RQT9046-P).indb10DMR-EZ28-PPC(RQT9046-P).indb10 2007/12/0715:25:272007/12/0715:25:27

11
Getting Started
RQT9046
You can enjoy high-quality picture and audio by changing the audio/video (AV) cable connection between this unit
and your TV on pages 8 to 10 as follows.
Connecting to a TV with an HDMI (High Definition Multimedia Interface) Cable
When connected to an HDMI compatible unit, an uncompressed digital audio and video signal is transmitted,
enabling you to enjoy high quality digital video and audio with just one cable. When connecting to an HDMI-
compatible HDTV (High Definition Television), the output can be switched to 1080p, 1080i or 720p HD video.
Regarding “HDAVI Control” function
When connecting with a Panasonic TV (VIERA) or a receiver equipped with “HDAVI Control” function, linked
operations are possible. [➔ 34, Linked Operations with the TV (VIERA Link™ “HDAVI Control™”)]
Please use HIGH SPEED HDMI cables that have the HDMI logo (as shown on the cover). It is
recommended that you use Panasonic’s HDMI cable.
Recommended part number: RP-CDHG10 (1.0 m/3.3 ft.), RP-CDHG15 (1.5 m/4.9 ft.), RP-CDHG20
(2.0 m/6.6 ft.), RP-CDHG30 (3.0 m/9.8 ft.), RP-CDHG50 (5.0 m/16.4 ft.), etc.
Non-HDMI-compliant cables cannot be used.
•
•
Rear of TV
HDMI IN
Rear of this unit
HDMI cable
(not included)
Set “HDMI Priority” and “HDMI Audio Output” to “On” (➔ 54, 55). (The default setting is “On”.)
Notes
If connecting to equipment that is only compatible with 2 channels output, audio with 3 channels or more will be
down-mixed (➔ 77) and output as 2 channels (some discs cannot be down-mixed).
For display units compatible with HDCP (High bandwidth Digital Content Protection) that are equipped with a
digital DVI input terminal (PC monitors, etc.):
Depending on the unit, images may not display properly or at all when connecting with a DVI/HDMI switching
cable (audio cannot be output).
•
•
•
•
DMR-EZ28-PPC(RQT9046-P).indb11DMR-EZ28-PPC(RQT9046-P).indb11 2007/12/0715:25:272007/12/0715:25:27

12
RQT9046
Setting the Channels and Clock
Preparation:
Turn on the television and select the appropriate video input
to suit the connections to this unit (Example: AV input).
These are the first settings you make upon buying the
unit. You don’t need to make these settings again.
•
•
to turn the unit on.
“HELLO” appears on the unit’s display.
When this unit is connected to a Panasonic TV (VIERA)
supporting HDAVI Control 3 via an HDMI cable (➔11),
it acquires the setting information from the TV. When the
Quick Start Setting screen appears (➔14, step 1)
–
•
Language:
e, rto select, then
When the Quick Start Setting screen
appears after this step (➔14, step 1)
•
English
Español
Français
Press OK
Pulse OK
Appuyer sur OK
Select Language
Seleccione el idioma
Sélection de langue
TV Aspect Ratio:
e, rto select “4:3 TV” or
“16:9 Widescreen TV”, then
Aspect Ratio Selection
Select TV type and press OK.
(Please refer to Operation Instruction
for details)
4:3 TV
16:9 Widescreen TV
16:9
4:3
When connecting to a 4:3 standard aspect TV:
Select “4:3 TV”.
When connecting to a 16:9 widescreen TV:
Select “16:9 Widescreen TV”.
•
•
Quick Start Function:
e, rto select “On” or “Off”,
then
Quick Start Setting
The unit can be turned on faster, in about
1 second. Please note that Quick Start
mode slightly increases power
consumption when the unit is off.
(See Operation Instructions for details)
Turn Quick Start on ?
On
Off
Automatic Clock and Channel
Settings:
e, rto select “Yes” or “No”,
then
When connecting the cable from the wall
(cable TV or antenna) to the unit’s RF IN:
Select “Yes”.
The unit then displays the source selection
screen (➔13).
When not connecting the cable from the wall
(cable TV or antenna) to the unit’s RF IN:
Select “No”.
The unit then displays “Set Clock Manually”
screen (➔13, Manual Clock Setting).
•
•
Automatic Clock and Channel Settings
Does this unit get its TV signal via RF IN?
Example: Antenna, Cable TV or Cable Box connected to the
unit’s RF IN.
Yes
No
8
Tips
“Quick Start” function (➔49)
If you set Quick Start to on, you can start
recording to DVD-RAM about 1 second
after you press [^DVD POWER] to turn
the unit on and then sequentially press
[*REC].
The following happens when you have
selected “On”.
Power consumption in standby mode
increases because power is supplied to
the unit.
To return to the previous screen
Press [RETURN].
•
–
DMR-EZ28-PPC(RQT9046-P).indb12DMR-EZ28-PPC(RQT9046-P).indb12 2007/12/0715:25:282007/12/0715:25:28

13
Getting Started
RQT9046
The types of transmission:
e, rto select “Antenna” or
“Cable”, then
Automatic Clock and Channel Settings
Please select the wire connected to RF IN.
Antenna
OK
Cable
to start automatic channel/
clock setting.
8
Confirm the time, then
DST (Daylight Saving Time) shows the
summertime setting.
Time Zone shows the time difference from
Greenwich Mean Time (GMT).
Set Clock Automatically
Clock Setting completed successfully.
4/4/2007 11:15 AM
DST----------- On
Time Zone---- EST
OK
See “Notes”
(➔right)
–
–
Tips
If the unit displays “No channels were found.”, turn off the unit
and confirm the cable or antenna input is connected to the RF IN
terminal. Restart the set up again (➔below).
If “Auto Clock Setting is incomplete.” is displayed, press [OK]
and set the clock manually (➔right).
If the clock is not correct, set the clock with “Adjust Time Zone”
(➔49) or “Set Clock Manually” (➔49).
You can delete channels you don’t need after completing Auto
Channel Setting (➔46).
Restarting the Auto-Setup
(after relocation, for example)
1. When the unit is on and stopped, press and hold [CH 2] and
[CH 1] on the main unit at the same time for about 5 seconds.
The unit turns off.
2. Press [^DVD POWER] to turn the unit on.
(The signal source and channel captions revert to their default
values. All scheduled recordings are cleared.)
To cancel in the middle
Press [RETURN].
Notes
Conditions of the received channel may cause automatic channel/
clock setting to take extra time.
•
•
•
•
Manual Clock Setting
Perform steps 1–5 on page 12.
w, qto select the item you want
to change.
Set Clock Manually
/:
/SAT AM
DST
EST
11 2000 12
Off
Time Zone
EST
00
Month Day Year Hour Minute
e, rto change the setting.
Repeat steps 6-7 to change other items.–
8
to confirm new date and
time.
The clock starts.–
Notes
The automatic clock setting can take a few minutes.
Time Zone
EST (Eastern Standard Time) = GMT –5
CST (Central Standard Time) = GMT –6
MST (Mountain Standard Time) = GMT –7
PST (Pacific Standard Time) = GMT –8
AST (Alaska Standard Time) = GMT –9
HST (Hawaii Standard Time) = GMT –10
For other areas: xx hr
DST (Daylight Saving Time)
If you select “On”, the clock is advanced one hour beginning at 2
a.m. on the second Sunday in March and ending at 2 a.m. on the
first Sunday in November.
Set the DST period manually when it varies according to regions
(➔below).
To set the DST period manually
1. Press [SETUP].
2. Press [e, r] to select “Setup” then press [q].
3. Press [e, r] to select “Clock Settings” then press [OK].
4. Press [e, r] to select “Set the time change dates for DST” then
press [OK].
5. Press [e, r, w, q] to set the “Month”, “Day”, “Hour”, and “Minute”
then press [OK].
Reinitializes the
settings.
Setup
Channel
Setup
Disc
Video
Audio
Display
TV Screen
Set the time change dates for DST
OK
:AM
3SUN2nd 2 00
Month
Beginning
Day Hour Minute
:AM
11 SUN1st 2 00
Restore Default
Month
End
Day Hour Minute
•
•
•
DMR-EZ28-PPC(RQT9046-P).indb13DMR-EZ28-PPC(RQT9046-P).indb13 2007/12/0715:25:312007/12/0715:25:31

14
RQT9046
Acquiring the setting information from the TV (VIERA)
If this unit is connected to a Panasonic TV (VIERA) supporting HDAVI
Control 3 via an HDMI cable, then the setting information on the TV is
acquired by this unit when the unit is turned on for the first time. Please
proceed to the following steps.
The following screen is displayed in the language set on the VIERA.
– The language setting screen may be displayed depending on the usage
environment. Press [e, r] to select language, then press [OK].
Quick Start Function:
e, rto select “On” or “Off”,
then
The unit can be turned on faster, in about
1 second. Please note that Quick Start
mode slightly increases power
consumption when the unit is off.
(See Operation Instructions for details)
Turn Quick Start on ?
On
Off
Quick Start Setting
Channel information acquisition:
e, rto select “Set Channels
via VIERA Link”, then
Acquires the following information from the TV (VIERA).
The types of transmission
Channel Map
Closed caption
When the settings are complete, the time confirmation screen is
displayed.
•
–
–
–
Automatic Clock and Channel Settings
Set No Channels with this unit
Set Channels without VIERA Link
Please select how to set channels. It is possible to
download the channel information from your TV via
VIERA Link. In case you do not need channels, please
select “Set No Channels with this unit”.
Set Channels via VIERA Link
OK
Confirm the time, then
For details of the time information (➔13, Tips, Notes)
Set Clock Automatically
Clock Setting completed successfully.
4/4/2007 11:15 AM
DST----------- On
Time Zone---- EST
OK
–
Tips
If you do not want to acquire the
setting information from the VIERA
Press [e, r] to select “Set Channels
without VIERA Link” or “Set No
Channels with this unit”, then press
[OK] in step 2.
When connecting the cable from the
wall (cable TV or antenna) to the unit’s
RF IN:
Select “Set Channels without VIERA
Link”.
The unit then displays the source
selection screen (➔13, left column,
step 6).
When not connecting the cable from
the wall (cable TV or antenna) to the
unit’s RF IN:
Select “Set No Channels with this
unit”.
The unit then displays “Set Clock
Manually” screen (➔13, Manual
Clock Setting).
If “Automatic Clock and Channel
Settings” screen is displayed, the
channel information could not be
acquired from the TV (VIERA). Please go
to step 5 on page 12.
To return to the previous screen
Press [RETURN].
Notes
Acquisition of the setting information
is not supported by all Panasonic TVs
(VIERA).
The acquisition may take some time
depending on the VIERA setting
information.
•
–
–
•
•
•
Setting the Channels and Clock
DMR-EZ28-PPC(RQT9046-P).indb14DMR-EZ28-PPC(RQT9046-P).indb14 2007/12/0715:25:332007/12/0715:25:33

15
RQT9046
Getting Started
Watching Television
This DVD recorder has a tuner which allows it to directly receive and record
analog and terrestrial digital channels. High Definition (HD) programming is
“down-converted” and recorded in Standard Definition (SD).
Preparation:
Turn on the television and select the appropriate video input to suit the
connections to this unit (Example: AV input).
to turn the unit on.
“HELLO” appears on the unit’s display.–
to select desired channel.
You can also select channels with the numbered buttons.
To directly enter channels for analog and digital broadcasts:
Antenna Mode: Cable TV Mode:
e.g., “3”: [0] ➔[3] ➔[OK] e.g., “5”: [0] ➔[0] ➔[5] ➔[OK]
“13”: [1] ➔[3] ➔[OK] “15”: [0] ➔[1] ➔[5] ➔[OK]
To enter the sub channel number for a digital broadcast:
Antenna Mode: Cable TV Mode:
e.g., “3-1”: [3] ➔[-] ➔[1] ➔[OK] e.g., “1-1”: [1] ➔[-] ➔[1] ➔[OK]
“13-1”: [1] ➔[3] ➔[1] ➔[OK] “15-1”: [1] ➔[5] ➔[-] ➔[1] ➔[OK]
The hyphen appears automatically on “Antenna Mode” if you enter two numbers.
•
•
To set Favorite Channels
You can define a Favorite list containing your favorite channels only. (Up to 30 channels)
1. After selecting the desired channel to set
Press [SUB MENU].
2. Press [e, r] to select “Set Favorite”, then press [OK].
3. Press [e, r] to select the position on the list, then press [OK].
−Press [w, q] to change between pages.
−You can also select a list number (1-9 and 0) with the numbered buttons.
To delete the favorite channels registered
Press [e, r] to select the channel on the list, then press [OK].
To select a channel from the Favorite list
1. Press [FAVORITE].
2. Press [e, r] to select a channel, then press [OK].
−Press [w, q] to change between pages.
−You can also select a channel with the numbered buttons.
Notes
It is possible to select a channel from the Favorite list for instant or scheduled
recording (➔17, 18).
If you set “Surf Mode” to “Favorite” (➔47), then only the Favorite channels can be
selected using [CH 1, 2].
You can register channels in the Favorite list from Channel Setting list (➔46, Setting
favorite channels).
•
•
•
Notes
This unit can receive most Basic
Cable television channels. It can not
receive Premium Services that require
additional fees or a separate decoder.
This unit can receive music channels
from digital broadcasters, but you
cannot record them. Data broadcasts
are not for viewing or recording.
Multi-channel surround broadcast is
output in stereo (on 2 channels).
Tips
To zoom in on video
1. Press [SUB MENU].
2. Press [e, r] to select “Zoom In”, then
press [OK].
•
•
•
Basic Operations
DMR-EZ28-PPC(RQT9046-P).indb15DMR-EZ28-PPC(RQT9046-P).indb15 2007/12/0715:25:352007/12/0715:25:35

16
RQT9046
Preparation:
Turn on the television and select the appropriate video input to suit the
connections to this unit (Example: AV input).
Playing Discs
Refer to “Advanced Playback” (➔26, 27) for detailed information on playback.
RAM -R -R DL -RW(V) +R +R DL +RW DVD-V -RW(VR) CD
to turn the unit on.
“HELLO” appears on the unit’s display.–
; OPEN/CLOSE
to open the tray (Button located on the upper front of the unit).
Insert a disc.–
The tray closes and play begins.–
Stopping Play
Press [gSTOP].
The stopped position is
memorized. (Resume play
function)
The stopped position is cleared
when you press [gSTOP] two or
more times, or press
[;OPEN/CLOSE].
–
–
Pausing Play
Press [hPAUSE].
Press again to restart play.–
Tips
Icons such as “ RAM ” indicate usable discs. Refer to pages 62 and 63.
Notes
RAM -R -R DL -RW(V) +R +R DL +RW -RW(VR)
Playback starts from the most recent recording.
DVD-V CD
Playback starts from the beginning of the disc.
DivX
DivX Menu screen appears (➔29).
The unit takes some time to read the disc before play starts.
Discs continue to rotate while menus are displayed. Press [gSTOP] when you finish to
preserve the unit’s motor and your television screen.
•
•
•
•
•
Playback
DMR-EZ28-PPC(RQT9046-P).indb16DMR-EZ28-PPC(RQT9046-P).indb16 2007/12/0715:25:362007/12/0715:25:36

17
RQT9046
Basic OperationsBasic Operations
Recording Television Programs
Refer to “Important Notes for Recording” (➔20) and “Advanced Recording” (➔21 to 23) for detailed information on
recording.
RAM -R -R DL -RW(V) +R +R DL +RW
Preparation:
Turn on the television and select the appropriate video input to suit the
connections to this unit (Example: AV input).
RAM If the disc is protected, release protection (➔44).
•
•
to turn the unit on.
“HELLO” appears on the unit’s display.–
; OPEN/CLOSE
to open the tray (Button located on the upper front of the unit).
Insert a disc with enough remaining blank space and press
[;OPEN/CLOSE] again to close the tray.
–
to select desired channel.
Antenna Mode:
e.g. channel 4-2
Cable TV Mode:
e.g. channel 102-45
To select with the numbered buttons (➔15).
When no channel setting is performed on the unit and broadcast is
recorded directly from the cable box or satellite receiver, select a
channel on the connected equipment and press [INPUT SELECT]
to select “IN1” or “IN2”.
–
–
to select the recording mode.
Recording mode should be determined by program length and
available time on the disc (➔21).
Recording mode Remaining time
–
to start recording.
REC
Pausing Recording
Press [hPAUSE].
Press again to restart recording.–
Stopping Recording
Press [gSTOP].
Tips
Icons such as “ RAM ” indicate usable
discs. Refer to pages 62 and 63.
Notes
-R -R DL -RW(V) +R +R DL +RW
It takes about 30 seconds for the unit
to complete recording management
information after recording finishes.
You cannot change the channel or
recording mode during recording.
•
•
DMR-EZ28-PPC(RQT9046-P).indb17DMR-EZ28-PPC(RQT9046-P).indb17 2007/12/0715:25:382007/12/0715:25:38

18
RQT9046
Scheduled Recording
Refer to “Advanced Scheduled Recording” (➔23, 24) for detailed information on scheduled recording.
RAM -R -R DL -RW(V) +R +R DL +RW
Preparation:
Turn on the television and select the appropriate video input to suit the
connections to this unit (Example: AV input).
RAM If the disc is protected, release protection (➔ 44).
Insert a disc with enough remaining blank space.
Confirm that the clock on the unit’s display is set to the correct time.
If connected via a cable box or satellite receiver, set channel on that
equipment before scheduled recording starts.
•
•
•
•
•
CANCEL
S
SUB MENU
Timer Off A
Schedule List Remaining Recording Time
3/26 Tue 12:53 PM
1:58 SPDVD
ChannelNo
Press OK to set new schedule.
Date On
New Scheduled Recording
Off Mode Check
OK
e, rto select “New Scheduled Recording”, then
w, qto move through the items and e, rto set
the items.
Channel/Input TV Station/External Input
To select a favorite channel
(To set Favorite Channels, see page 15.)
1. Press [SUB MENU].
2. Press [e, r] to select “Change Surf Mode”, then press [OK].
3. Press [e, r] to select “Favorite”, then press [OK].
–
Date/Frequency You can set a daily or weekly program.–
On (start time) / Off (end time)
Hold button to change in 30-minute increments.–
Mode Recording mode, see page 21–
Name Press [OK], see page 33.–
To delete all items
1. Press [SUB MENU].
2. Press [e, r] to select “Delete”, then press [OK].
Channel, Caption
Preview of selected
channel
SCHEDULED
RECORDING
Channel/
Input Date/
Frequency
--------
On
-- : -- --
Off
-- : -- --
Mode
--
OK
Name
Number
--
0 9
4-1
4-1 KPO-SD
Remaining Recording Time
3/26 Tue 12:53 PM
1:58 SPDVD
Cancel
Set Channel/Input.
S
SUB MENU
Surf Mode: All
−Repeat steps 2−4 to program other recordings.
when you have finished programming.
“z” lights on the unit’s display.
Scheduled recording can be started only when the unit is turned off.
–
–
Notes
To prevent recording errors
Set a scheduled recording period slightly
longer than the actual program (to make
sure the program is recorded in full).
Be sure to perform step 5 before the
scheduled recording time. When the
unit is turned off, “z” lights on the unit’s
display to indicate scheduled recording
standby has been activated.
“z” flashes when the unit cannot go to
scheduled recording standby. (e.g., a
recordable disc is not in the disc tray)
It does not flash if Quick Start is off.
When scheduled recordings are set to
start one immediately after another, the
unit cannot record the beginning of the
later program.
If two scheduled recording times overlap
the recording that started first always
has priority. The second recording will
start only after the first recording has
finished.
If two starting times is the same the
recording that programmed later always
has priority.
Depending on the Daylight Savings Time
(DST) settings for this unit, scheduled
recordings may be affected when the
seasons change.
•
•
•
•
•
•
•
Tips
Icons such as “ RAM ” indicate usable
discs. Refer to pages 62 and 63.
DMR-EZ28-PPC(RQT9046-P).indb18DMR-EZ28-PPC(RQT9046-P).indb18 2007/12/0715:25:402007/12/0715:25:40

19
RQT9046
Basic OperationsBasic Operations
Important: Once deleted, contents cannot be recovered.
Preparation:
Turn on the television and select the appropriate video input to suit the
connections to this unit (Example: AV input).
Insert the disc containing the recording to be deleted.
RAM If the disc is protected, release protection (➔44).
•
•
•
Delete Navigator
RAM -R -R DL -RW(V) +R +R DL +RW
to select the DVD drive.
With the unit stopped
Playback
Program
Delete
Other Functions
FUNCTIONS Cartridge Protection Off
Disc Protection Off
DVD-RAM
OK
e, rto select “Delete”, then
RAM When the Album View screen is displayed,
press to switch to the Recordings screen.
No.
--
0 9
DELETE Navigator
DVD-RAM Recordings
Page 02/02
Previous
10 10/27 Mon
Next
Delete
07
8 10/27 Mon
08
-- -- --
--
S
SUB MENU Select NextPrevious
Video Picture
B
A
No.
--
0 9
DELETE Navigator
DVD-RAM Recordings
Page 02/02
Previous
10 10/27 Mon
Next
Delete
07
8 10/27 Mon
08
-- -- --
--
S
SUB MENU Select NextPrevious
Video Picture
B
A
e, r, w, qto select the recording, then
wto select “Delete”, then
Tips
To return to the previous screen
Press [RETURN].
To view other pages
Press [e, r, w, q] to select “Previous” or “Next”, then press [OK].
You can also press [u, i] to view other pages.
Multiple editing
Select with [e, r, w, q], then press [hPAUSE]. (Repeat.)
A checkmark appears. Press [hPAUSE] again to cancel.
Delete Recordings During Playback
RAM -R -R DL -RW(V) +R +R DL +RW
During playback
wto select “Delete”, then
•
•
Deleting Recordings
Notes
You cannot delete while recording.
+R +R DL +RW Even if you have set
protection on other equipment, such
recordings are deleted.
Tips
Icons such as “ RAM ” indicate usable
discs. Refer to pages 62 and 63.
RAM Deleting an item increases the
available disc space, for the amount
of space taken up by the item being
deleted.
-R -R DL +R +R DL Available disc space
does not increase after deletion.
-RW(V) +RW Available disc space
increases when you delete the last
recording (the recording space may
increase slightly when other recordings
are deleted).
•
•
•
•
•
•
DMR-EZ28-PPC(RQT9046-P).indb19DMR-EZ28-PPC(RQT9046-P).indb19 2007/12/0715:25:422007/12/0715:25:42

20
RQT9046
Recording of
multilingual
broadcasts
Analog broadcasts:
RAM
Both Main and SAP are recorded.
You can change the audio during playback (➔27, Changing
Audio during Playback).
Main SAP
Hello Hola
If you record from external equipment
(➔24)
Select both “Main” and “SAP” on the
external equipment.
•Main
-R -R DL -RW(V) +R +R DL +RW
Select the Main or SAP audio before
recording.
[➔51, Multi-channel TV Sound (Analog)]
The selected audio only is recorded.
Hello If you record from external
equipment (➔24)
Select “Main” or “SAP” on
the external equipment.
•
Digital broadcasts:
Press [AUDIO] to switch audio. (➔22)
The selected audio only is recorded.
Recording of
Widescreen
broadcasts
RAM
Recorded in 16:9 aspect (Widescreen)
-R -R DL -RW(V) +R +R DL +RW
Recorded in 4:3 aspect
If you have a regular 4:3 aspect TV and you receive 16:9 aspect images from a digital broadcast, they will appear in
the letterbox format (➔77, Letterbox).
•
Copy-once
Recording
It is not possible to record digital broadcasts that allow “One time only recording” onto DVD-R, DVD-R DL, DVD-RW,
+R, +R DL, +RW or 8 cm (3˝) DVD-RAM discs. Use the CPRM (➔77) compatible DVD-RAM.
•
RAM CPRM compatible discs only
When purchasing discs, check that they support CPRM.•
-R -R DL -RW(V) +R +R DL +RW
Yes No
12 cm (5˝)
Playing the
disc on other
DVD players
-R -R DL -RW(V) +R +R DL
The disc must be finalized after recording (➔45).
All DVD-R, etc. discs recorded on this unit must be finalized before they can be played on other DVD players. Once
finalized DVD-R, etc. become “read-only” and can no longer be used for recording. DVD-RW can be reused after
finalizing.
Whether DL discs recorded on this unit can be played on other DVD Players will depend entirely on the capabilities of
that player. 100 % compatibility is not guaranteed to.
CHG
SEARCH
ENTER
OFF
MENU
RETURN
TOPMENUDISPLA
Y
VOL
ON
A.SURROUND
MONITORMODE
PICTUREMODE
REPEAT
OPEN
DCIN9V
ê/I ê CDSEQUENTIAL
DISC
DOUBLERE-MASTER ;º 1 :/65/9 DISCEXCHANGE DISCSKIP < OPEN/CLOSE
1 2345
Record to DVD-R, etc.
Finalize
Play on other DVD equipment
+RW We recommend you create the menu before playing a +RW disc on other equipment (➔45).
RAM DVD-RAM can be played back on Panasonic DVD recorders and DVD-RAM compatible DVD players.
Recording
to DVD-R DL
and +R DL
DVD-R DL and +R DL discs have two layers of recording surface on one side.
-R DL Recordings are divided when recording changes from the first layer to the second. Some images and audio
may be lost at this point.
+R DL Recordings continue through the layer change with only a slight pause similar to what you will see with
commercial DVD-Video discs. Any recording exceeding 8 hours in length is automatically divided whether a layer
change is required or not.
•
•
The second layer
The available
space
The first layer
Recording 1 Recording 2
(Disc inner
side)
Recording/Playback direction
(Disc outer
side)
Layer change:
Recording divided,
some images and
audio lost.
Recording 3
DVD-R DL
Important Notes for Recording
DMR-EZ28-PPC(RQT9046-P).indb20DMR-EZ28-PPC(RQT9046-P).indb20 2007/12/0715:25:452007/12/0715:25:45