Panasonic BMET200 - IRIS RECOGNITION User manual

General
Power source *1 12 V DC/24 V DC
Power consumption Max. 24 W
Ambient operating temperature 0 ºC to +40 ºC (32 ºF to 104 ºF)
Ambient operating humidity 30 % to 90 %
Dimensions 203 mm (W) x 190 mm (H) x 77 mm (D) (8" (W) x 7-1/2"(H) x 3-1/16"(D))
Weight 0.9 kg (1.98 lbs.) (this iris reader only)
Interface Wiegand, RS-485
Network 10 Base-T/100 Base-TX (Auto negotiation)
Network protocol TCP/IP
Available card reader for Iris on card system RWK400 (Manufactured by HID Corporation)
Input/Output
Iris Reader (BM-ET200)
Recognition start trigger input 0 V to 5 V, 24 mA (Max), Active low, Pulse width: 200 ms or more
Recognition result output1 (ACCEPT)
make contact output, Normally Open, Pulse width: 0.1 s to 60 s, 24 V DC,
100 mA, ON-Resistance 6 Ω
Audio Output (Preamplifier) Stereo mini plug (ø3.5 mm)(10 kΩ, 100 mV[P-P])
High speed serial interface Numeric Key, External memory (*5)
Interface Board (BM-ETA201) (optional)
Dimensions
65 mm (W) x 76 mm (H) x 31 mm (D) (2-9/16" (W) x 3" (H) x 1-1/4" (D))
Alarm output1 (tamper detection) Open collector output, Normally Open, Active low, 24 V DC, 24 mA
Alarm output2 (power status) Open collector output, Normally Close (Low level), 24 V DC, 24 mA
Recognition result output2 (REJECT)
Open collector output, Normally Open, Active low, Pulse width: 0.1 s to 60 s,
24 V DC, 24 mA
Buzzer input: 0 V to 5 V, 24 mA (Max), Active low, Pulse width: 200 ms or more
Time adjust input 0 V to 5 V, 24 mA (Max), Active low, Pulse width: 100 ms or more (*7)
Interface (card reader) Wiegand, RS-485 (Either can be selected.)
Wiegand power output (card reader) 5 V DC, 100 mA max.
Wiegand DATA0 input(card reader) 0 V to 5 V DC, 25 mA max., Active low
Wiegand DATA1 input (card reader) 0 V to 5 V DC, 25 mA max., Active low
RS-485 (A), (B) (card reader) Differential input: ±0.2 V or more,
Differential output: ±2 V or more (When termination is ON) (*6)
Interface (access control panel) Wiegand, RS-485 (Either can be selected.)
Wiegand power input (access control panel) 5 V DC (No connection available)
Wiegand DATA0 output (access control panel) 0 V to 5 V DC, 25 mA max., Active low
Wiegand DATA1 output (access control panel) 0 V to 5 V DC, 25 mA max., Active low
Wiegand ACCEPT-LED input (access control panel) 0 V to 5 V, 24 mA (Max.), Active low, Pulse width: 200 ms or more
Wiegand REJECT-LED input (access control panel) 0 V to 5 V, 24 mA (Max.), Active low, Pulse width: 200 ms or more
RS-485 (A), (B) (access control panel) Differential input: ±0.2 V or more,
Differential output: ±2 V or more (When termination is ON) (*6)
Video Surveillance Camera (BM-ETC202) (optional)
Video Output 1 V [P-P] NTSC composite 75 ΩBNC connector
Function
Iris recognition time Approx. 0.3 seconds (After iris image capturing until the recognition
result is output) (*2)
Approx. 5 seconds (Server certification. After iris image capturing until
the recognition result is output) (*3)
Eye image capturing range
Approx. 30 cm to 40 cm (11-13/16" to 15-3/4") between the eyes and the mirror
Total number of users enrolled
BM-ET200
Stand alone mode : 50 users max. Network mode : 5,025 users max. (*4)
Iris server 10,025 users max.
Voice guidance 14 languages supported (English, German, French, Spanish, Italian,
Russian, Chinese, Korean, Portuguese, Turkish, Arabic, Dutch,
Swedish, and Japanese)
Mute, Simple (recognition result), and Full (voice guidance and
recognition result) selectable
Distance indicator
Lighting of the lamp indicates the proper distance between the user and the main body.
Live indicator Blinking, On, and Off selectable
Angular field view Horizontal: 115 º, Vertical: 85 º (Fixed)
(Video surveillance camera: BM-ETC202)
Security function Tamper detection switch, Iris data encryption
Printed in Japan
BM-JHET200C(2P-549)
DISTRIBUTED BY:
PANASONIC CANADA INC.
5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada [phone]
PANASONIC PUERTO RICO INC.
DIVISION OF PANASONIC CORPORATION OF NORTH AMERICA
San Gabriel Industrial Park, 65th Infantry Ave. KM. 9.5 Carolina, P.R. 00985 [phone]
Panasonic System Solutions Company
Unit Company of Panasonic Corporation of North America
Security Systems
Website : www.panasonic.com/security
For Customer Support : call 1.877.733.3689
Executive Office : Three Panasonic Way 2H-2, Secaucus, New Jersey 07094
Iris Reader
BM-ET200
MAJOR OPERATING CONTROLS
Front & Side View
Bottom View
1
2
3
4
5
6
7
8
9
10
11
12
2
3
4
511
12
6
7
8
9
10
1
APPEARANCE
Unit : mm (inch)
BM-ET200 SPECIFICATIONS
PRODUCT CONFIGURATION
Iris Reader
BM-ET200
Administration Software
BM-ES200
User License Software
BM-EU30100
(for 100 Users)
BM-EU31000
(for 1,000 Users)
BM-EU33000
(for 3,000 Users)
BM-EU35000
(for 5,000 Users)
RECOMMENDED SMART CARD READERS AND WRITERS
Applicable products Manufacturer Product / Product No.
Smart Card Writer HID Corporation Ltd.
RFIDeas, Inc.
HID Corporation Ltd.
RWK400 RW400
RFID1356i (USB and RS-232)
Smart Card 2001, 2011, 2021, 2031, 2041, 2051, 2061
This software supports the blank card only.
Combination high-speed capture engine
and two mirrors for rapid,
high-accuracy recognition.
203(8")77(3-1/16")
190(7-1/2")
83.5
(3-5/16")
52
(2-1/16")
46
(1-13/16")
20.3
(13/16")
34
(1-5/16")
BM-ETA201
(optional)
BM-ETC202
(optional)
Interface Board
Video Surveillance Camera
Important
• In regard to details of the Smart Card Writer and the Smart card, refer to the
respective instruction manuals attached to merchandise.
• When a card writer is connected and a USB-RS-232C conversion connector is used,
the system may not operate normally.
• The USB connections are applicable to Windows®XP only. Operation is impossible
with Windows®2000.
• Private ID, and KnoWho are trademarks of Iridian Technologies, Inc., USA.
• iCLASS is a registered trademark of HID Corporation.
• Windows®2000 Professional, or Windows®XP Professional are registered trademarks of Microsoft Corporation in the USA and / or other countries.
• All other trademarks are the property of their respective copyright holders.
– Safety Precaution: carefully read the operating instructions and installation manual before using this product.
– Panasonic can not be responsible for network performance and/or other manufacturer products that reside on the network.
• All photographs and menu are simulated and shown for the purpose of explanation.
• Weights and dimensions are approximate. • Specifications are subject to change without notice. • This product is subject to export control regulations.
Distance Indicator
Front Panel
Mirrors
Eye Image Capturing Cameras
Audio Volume Controller
Video Surveillance Camera (Option)
Speaker
Results Indicator
Tilt Handles
Live Indicator
Front Cover
High Speed Serial Interface
*1 The third-party external power-supply should meet
the following specifications, and must be a UL Listed
access control power limited device.
Output voltage Output current capacity
12 V DC ±0.5 V 2 A or more
24 V DC ±0.5 V 1 A or more
Rated ripple voltage/Ripple noise: 150 mV [P-P] or less
Overcurrent protection: Enabled (mandatory)
*2 The recognition time may differ depending on
recognition condition.
*3
The recognition time may differ depending on capturing
conditions, network conditions, or the total number of
enrolled users.
*4 User Licence Software BM-EU30000 Series (option)
is required.
*5 Refer to the dealer for available external devices.
*6 Our exclusive protocol is employed.
*7 Refer to the dealer for available external devices.

Network system
Stand alone system
Set up PC
LAN connection
Numeric key
connection
Numeric key
Door control box
Make contact connection
*The existing BM-ET330 system can be connected to the BM-ET200 system after
upgrading the management software to BM-ES200 without changing existing data.
Voice guidance
recognition procedure
A speaker on the front panel offers voice
guidance for operational assistance and
recognition results. Fourteen (14) languages
can be selected for each iris reader.
Supported languages: English, French, German,
Spanish, Italian, Turkish, Arabic, Chinese,
Korean, Russian, Portuguese, Dutch, Swedish,
and Japanese.
Three settings for
voice guidance
Simple : Only recognition results are announced.
Full :Voice guidance such as ''Please move
a little closer'' and ''Please move back
a little'' and also recognition results
are given.
Mute :Novoice guidance.
Iris Reader
BM-ET200
The camera unit swivels
up and down
The angle of the two embedded cameras can be
adjusted to accommodate users from 152 cm to
180 cm. Taller users can simply bend over to
use the system.
Tamper Detection
The tamper protection feature prevents data from
being extracted from the system. An audible alarm
is triggered via the integrated tamper switches.
Alarm signals are also transmitted to the access
control system and Administration Server.
25 User License Included
Iris data for up to 25 users can be registered with
the Base Administration Software BM-ES200
within the network mode. With additional
(optional) user licenses, the system can register
and manage iris data for up to 10,025 users.
Contact Panasonic directly for systems
requiring more than 10,025 users. Up to 50
users are included in the stand alone mode.
50 user licenses included in the BM-ET200 in stand alone mode
cannot be used in a network mode.
Access log can be searched by time
Using the time of image capture stored in the
camera, you can search the access log of a
specific user for the specified time.
User Information Menu
Flexible registration software supports
incremental users. User License
Software; BM-EU30000 Series comes
in four key sizes: for 100 users, 1,000
users, 3,000 users, or max. 5,000
users. Easy operation and
management from a iris server, all
settings, registrations, updates,
and information confirmation can
be controlled from a PC display.
Smart Cards
Integrates with Wiegand-compatible Systems
SYSTEM DIAGRAMS
DB
DB
Smart Card
Smart Card
Writer
Iris Server
Access Control Server
Administration
Software
Enrollment Reader
BM-ET200
Smart Card
Card Reader
Card Reader
Access Control Panel
Access Control Panel Electric Lock
Electric Lock
Card Reader
Card Reader
Recognition Reader
BM-ET200
Recognition Reader
BM-ET200
Recognition Reader
BM-ET330*
Recognition Reader
BM-ET200
Recognition Reader
BM-ET200
The iris data on an ID card is compared
with the captured image to allow access.
Smart cards provide application flexibility
and do not require a central database.
Compatible with standard Wiegand interface protocol access
control systems thus offering flexible system configuration.
Legacy PROX cards are also supported.*
*
Most card formats are supported-please check with your local Panasonic sales office.
*
To handle the protocol, it is necessary to install the BM-ETA201 optional board
(sold separately).
LAN Connection
Wiegand Connection
RS-485 Connection
Iris Image Display
Capitalize 'Menu' to be consistent with others
For large and small systems
0
1
4
7
clear
enter
,
2
5
8
=
.
3
6
9
/
+
–
*
Enrollment Reader
BM-ET200
LAN
DB
DB
300 mm
(11-13/16")
11(7/16")
1,240 mm
(48-13/16")
1,678 mm
(66-1/16")
1,395 mm
(54-15/16")
0
400 mm
(15-3/4")
Upside limit of
the eye position
Bottom of camera unit
Downside
limit of the
eye position
45 °
High security, with false acceptance
rate of 1 in 1.2 million*
Iris
Retina
Lens
Iris Characteristics
• An extremely complex pattern that differs even between identical twins.
• Patterns stabilize between six months and two years of age and
then remain unchanged for life.
• They are extremely difficult to imitate.
"RECOGNIZING PERSONS BY THEIR IRIS PATTERNS" by Dr.John Daugman,
University of Cambridge.
Simple to configure and easy-to-use Iris Reader with recognition results in 0.3 seconds*
The BM-ET200 offers more-accurate, faster, non-contact entry/exit control
utilizing biometric technology for iris recognition.
The system can be used to check IDs in a variety of applications,
including airports and entry/exit control for many types of industries.
Fast, high-speed capture engine developed to
obtain recognition in only 0.3 seconds
*Time required for recognition in a normal, ready-to-recognize condition after the eyes are aligned with the main unit mirrors.
Panasonic developed a unique high-speed capture engine
that obtains recognition in only 0.3 seconds after eye
position alignment with the mirrors. If recognition is not
achieved the first time, the operation is automatically
repeated at high prompting speeds.
Dual-mirror configuration
makes eye alignment easy
A distance guide indicator informs the
user of proper iris capture distance
To adjust the camera for the most optimal eye distance,
both voice instructions and a distance indicator lamp
guide provide user guidance so the correct capture
position is achieved.
Too close
Suitable
Too far
Distance
Live indicator
The light indicates the current operating
condition.
Distance indicator
Lighting of the lamp indicates the proper
capture distance between the user and the
BM-ET200.
Mirrors (Dual)
Adjusts the eye position when registering
or recognizing eyes.
Eye image capturing cameras
Located behind the mirrors, the camera
captures images of the irises.
Results indicator
The lamp lights when recognition
is complete. *To handle the protocol, it is necessary to
install the BM-ETA201 optional board
(sold separately).
Number of
lighting lamps Voice guidance
Maximum system specification
Maximum number of iris readers 256 units
Number of users that can be registered 10,025 users
Local matching 5,025 users
Two mirrors are mounted on the front panel. Eye
position is less likely to be out of side to side
alignment, making recognition easier. Positioning of
either the left or right eye is simplified.
Iris recognition uses individual
differences in the complex
patterns found within the
iris of the human eye to
authenticate individual identities.
Iris recognition is the most precise
of all biometric identification systems.
The false acceptance rate is so low that the probability of
falsely identifying one individual as another is virtually zero.
Please move
back a little
Please move a
little closer
Environment Setting Menu
APPLICATIONS
Offices Laboratories and factories Financial institutions Lifeline facilities Traffic control centers Airport and harbor facilities
• Police
• Prisons
• Courts
• Any and
all security
applications
Data center, material storage,
safes, executive offices, secure
meeting rooms
Drug or dangerous materials
storage rooms, night or holiday
entry control
Safes, safety deposit box rooms Power generator rooms, dam
management offices, gas
company control rooms
Expressway administration
centers, railroad dispatcher
rooms
Staff gates, Immigration,
workshops

Network system
Stand alone system
Set up PC
LAN connection
Numeric key
connection
Numeric key
Door control box
Make contact connection
*The existing BM-ET330 system can be connected to the BM-ET200 system after
upgrading the management software to BM-ES200 without changing existing data.
Voice guidance
recognition procedure
A speaker on the front panel offers voice
guidance for operational assistance and
recognition results. Fourteen (14) languages
can be selected for each iris reader.
Supported languages: English, French, German,
Spanish, Italian, Turkish, Arabic, Chinese,
Korean, Russian, Portuguese, Dutch, Swedish,
and Japanese.
Three settings for
voice guidance
Simple : Only recognition results are announced.
Full :Voice guidance such as ''Please move
a little closer'' and ''Please move back
a little'' and also recognition results
are given.
Mute :Novoice guidance.
Iris Reader
BM-ET200
The camera unit swivels
up and down
The angle of the two embedded cameras can be
adjusted to accommodate users from 152 cm to
180 cm. Taller users can simply bend over to
use the system.
Tamper Detection
The tamper protection feature prevents data from
being extracted from the system. An audible alarm
is triggered via the integrated tamper switches.
Alarm signals are also transmitted to the access
control system and Administration Server.
25 User License Included
Iris data for up to 25 users can be registered with
the Base Administration Software BM-ES200
within the network mode. With additional
(optional) user licenses, the system can register
and manage iris data for up to 10,025 users.
Contact Panasonic directly for systems
requiring more than 10,025 users. Up to 50
users are included in the stand alone mode.
50 user licenses included in the BM-ET200 in stand alone mode
cannot be used in a network mode.
Access log can be searched by time
Using the time of image capture stored in the
camera, you can search the access log of a
specific user for the specified time.
User Information Menu
Flexible registration software supports
incremental users. User License
Software; BM-EU30000 Series comes
in four key sizes: for 100 users, 1,000
users, 3,000 users, or max. 5,000
users. Easy operation and
management from a iris server, all
settings, registrations, updates,
and information confirmation can
be controlled from a PC display.
Smart Cards
Integrates with Wiegand-compatible Systems
SYSTEM DIAGRAMS
DB
DB
Smart Card
Smart Card
Writer
Iris Server
Access Control Server
Administration
Software
Enrollment Reader
BM-ET200
Smart Card
Card Reader
Card Reader
Access Control Panel
Access Control Panel Electric Lock
Electric Lock
Card Reader
Card Reader
Recognition Reader
BM-ET200
Recognition Reader
BM-ET200
Recognition Reader
BM-ET330*
Recognition Reader
BM-ET200
Recognition Reader
BM-ET200
The iris data on an ID card is compared
with the captured image to allow access.
Smart cards provide application flexibility
and do not require a central database.
Compatible with standard Wiegand interface protocol access
control systems thus offering flexible system configuration.
Legacy PROX cards are also supported.*
*
Most card formats are supported-please check with your local Panasonic sales office.
*
To handle the protocol, it is necessary to install the BM-ETA201 optional board
(sold separately).
LAN Connection
Wiegand Connection
RS-485 Connection
Iris Image Display
Capitalize 'Menu' to be consistent with others
For large and small systems
0
1
4
7
clear
enter
,
2
5
8
=
.
3
6
9
/
+
–
*
Enrollment Reader
BM-ET200
LAN
DB
DB
300 mm
(11-13/16")
11(7/16")
1,240 mm
(48-13/16")
1,678 mm
(66-1/16")
1,395 mm
(54-15/16")
0
400 mm
(15-3/4")
Upside limit of
the eye position
Bottom of camera unit
Downside
limit of the
eye position
45 °
High security, with false acceptance
rate of 1 in 1.2 million*
Iris
Retina
Lens
Iris Characteristics
• An extremely complex pattern that differs even between identical twins.
• Patterns stabilize between six months and two years of age and
then remain unchanged for life.
• They are extremely difficult to imitate.
"RECOGNIZING PERSONS BY THEIR IRIS PATTERNS" by Dr.John Daugman,
University of Cambridge.
Simple to configure and easy-to-use Iris Reader with recognition results in 0.3 seconds*
The BM-ET200 offers more-accurate, faster, non-contact entry/exit control
utilizing biometric technology for iris recognition.
The system can be used to check IDs in a variety of applications,
including airports and entry/exit control for many types of industries.
Fast, high-speed capture engine developed to
obtain recognition in only 0.3 seconds
*Time required for recognition in a normal, ready-to-recognize condition after the eyes are aligned with the main unit mirrors.
Panasonic developed a unique high-speed capture engine
that obtains recognition in only 0.3 seconds after eye
position alignment with the mirrors. If recognition is not
achieved the first time, the operation is automatically
repeated at high prompting speeds.
Dual-mirror configuration
makes eye alignment easy
A distance guide indicator informs the
user of proper iris capture distance
To adjust the camera for the most optimal eye distance,
both voice instructions and a distance indicator lamp
guide provide user guidance so the correct capture
position is achieved.
Too close
Suitable
Too far
Distance
Live indicator
The light indicates the current operating
condition.
Distance indicator
Lighting of the lamp indicates the proper
capture distance between the user and the
BM-ET200.
Mirrors (Dual)
Adjusts the eye position when registering
or recognizing eyes.
Eye image capturing cameras
Located behind the mirrors, the camera
captures images of the irises.
Results indicator
The lamp lights when recognition
is complete. *To handle the protocol, it is necessary to
install the BM-ETA201 optional board
(sold separately).
Number of
lighting lamps Voice guidance
Maximum system specification
Maximum number of iris readers 256 units
Number of users that can be registered 10,025 users
Local matching 5,025 users
Two mirrors are mounted on the front panel. Eye
position is less likely to be out of side to side
alignment, making recognition easier. Positioning of
either the left or right eye is simplified.
Iris recognition uses individual
differences in the complex
patterns found within the
iris of the human eye to
authenticate individual identities.
Iris recognition is the most precise
of all biometric identification systems.
The false acceptance rate is so low that the probability of
falsely identifying one individual as another is virtually zero.
Please move
back a little
Please move a
little closer
Environment Setting Menu
APPLICATIONS
Offices Laboratories and factories Financial institutions Lifeline facilities Traffic control centers Airport and harbor facilities
• Police
• Prisons
• Courts
• Any and
all security
applications
Data center, material storage,
safes, executive offices, secure
meeting rooms
Drug or dangerous materials
storage rooms, night or holiday
entry control
Safes, safety deposit box rooms Power generator rooms, dam
management offices, gas
company control rooms
Expressway administration
centers, railroad dispatcher
rooms
Staff gates, Immigration,
workshops

General
Power source *1 12 V DC/24 V DC
Power consumption Max. 24 W
Ambient operating temperature 0 ºC to +40 ºC (32 ºF to 104 ºF)
Ambient operating humidity 30 % to 90 %
Dimensions 203 mm (W) x 190 mm (H) x 77 mm (D) (8" (W) x 7-1/2"(H) x 3-1/16"(D))
Weight 0.9 kg (1.98 lbs.) (this iris reader only)
Interface Wiegand, RS-485
Network 10 Base-T/100 Base-TX (Auto negotiation)
Network protocol TCP/IP
Available card reader for Iris on card system RWK400 (Manufactured by HID Corporation)
Input/Output
Iris Reader (BM-ET200)
Recognition start trigger input 0 V to 5 V, 24 mA (Max), Active low, Pulse width: 200 ms or more
Recognition result output1 (ACCEPT)
make contact output, Normally Open, Pulse width: 0.1 s to 60 s, 24 V DC,
100 mA, ON-Resistance 6 Ω
Audio Output (Preamplifier) Stereo mini plug (ø3.5 mm)(10 kΩ, 100 mV[P-P])
High speed serial interface Numeric Key, External memory (*5)
Interface Board (BM-ETA201) (optional)
Dimensions
65 mm (W) x 76 mm (H) x 31 mm (D) (2-9/16" (W) x 3" (H) x 1-1/4" (D))
Alarm output1 (tamper detection) Open collector output, Normally Open, Active low, 24 V DC, 24 mA
Alarm output2 (power status) Open collector output, Normally Close (Low level), 24 V DC, 24 mA
Recognition result output2 (REJECT)
Open collector output, Normally Open, Active low, Pulse width: 0.1 s to 60 s,
24 V DC, 24 mA
Buzzer input: 0 V to 5 V, 24 mA (Max), Active low, Pulse width: 200 ms or more
Time adjust input 0 V to 5 V, 24 mA (Max), Active low, Pulse width: 100 ms or more (*7)
Interface (card reader) Wiegand, RS-485 (Either can be selected.)
Wiegand power output (card reader) 5 V DC, 100 mA max.
Wiegand DATA0 input(card reader) 0 V to 5 V DC, 25 mA max., Active low
Wiegand DATA1 input (card reader) 0 V to 5 V DC, 25 mA max., Active low
RS-485 (A), (B) (card reader) Differential input: ±0.2 V or more,
Differential output: ±2 V or more (When termination is ON) (*6)
Interface (access control panel) Wiegand, RS-485 (Either can be selected.)
Wiegand power input (access control panel) 5 V DC (No connection available)
Wiegand DATA0 output (access control panel) 0 V to 5 V DC, 25 mA max., Active low
Wiegand DATA1 output (access control panel) 0 V to 5 V DC, 25 mA max., Active low
Wiegand ACCEPT-LED input (access control panel) 0 V to 5 V, 24 mA (Max.), Active low, Pulse width: 200 ms or more
Wiegand REJECT-LED input (access control panel) 0 V to 5 V, 24 mA (Max.), Active low, Pulse width: 200 ms or more
RS-485 (A), (B) (access control panel) Differential input: ±0.2 V or more,
Differential output: ±2 V or more (When termination is ON) (*6)
Video Surveillance Camera (BM-ETC202) (optional)
Video Output 1 V [P-P] NTSC composite 75 ΩBNC connector
Function
Iris recognition time Approx. 0.3 seconds (After iris image capturing until the recognition
result is output) (*2)
Approx. 5 seconds (Server certification. After iris image capturing until
the recognition result is output) (*3)
Eye image capturing range
Approx. 30 cm to 40 cm (11-13/16" to 15-3/4") between the eyes and the mirror
Total number of users enrolled
BM-ET200
Stand alone mode : 50 users max. Network mode : 5,025 users max. (*4)
Iris server 10,025 users max.
Voice guidance 14 languages supported (English, German, French, Spanish, Italian,
Russian, Chinese, Korean, Portuguese, Turkish, Arabic, Dutch,
Swedish, and Japanese)
Mute, Simple (recognition result), and Full (voice guidance and
recognition result) selectable
Distance indicator
Lighting of the lamp indicates the proper distance between the user and the main body.
Live indicator Blinking, On, and Off selectable
Angular field view Horizontal: 115 º, Vertical: 85 º (Fixed)
(Video surveillance camera: BM-ETC202)
Security function Tamper detection switch, Iris data encryption
Printed in Japan
BM-JHET200C(2P-549)
DISTRIBUTED BY:
PANASONIC CANADA INC.
5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada [phone]
PANASONIC PUERTO RICO INC.
DIVISION OF PANASONIC CORPORATION OF NORTH AMERICA
San Gabriel Industrial Park, 65th Infantry Ave. KM. 9.5 Carolina, P.R. 00985 [phone]
Panasonic System Solutions Company
Unit Company of Panasonic Corporation of North America
Security Systems
Website : www.panasonic.com/security
For Customer Support : call 1.877.733.3689
Executive Office : Three Panasonic Way 2H-2, Secaucus, New Jersey 07094
Iris Reader
BM-ET200
MAJOR OPERATING CONTROLS
Front & Side View
Bottom View
1
2
3
4
5
6
7
8
9
10
11
12
2
3
4
511
12
6
7
8
9
10
1
APPEARANCE
Unit : mm (inch)
BM-ET200 SPECIFICATIONS
PRODUCT CONFIGURATION
Iris Reader
BM-ET200
Administration Software
BM-ES200
User License Software
BM-EU30100
(for 100 Users)
BM-EU31000
(for 1,000 Users)
BM-EU33000
(for 3,000 Users)
BM-EU35000
(for 5,000 Users)
RECOMMENDED SMART CARD READERS AND WRITERS
Applicable products Manufacturer Product / Product No.
Smart Card Writer HID Corporation Ltd.
RFIDeas, Inc.
HID Corporation Ltd.
RWK400 RW400
RFID1356i (USB and RS-232)
Smart Card 2001, 2011, 2021, 2031, 2041, 2051, 2061
This software supports the blank card only.
Combination high-speed capture engine
and two mirrors for rapid,
high-accuracy recognition.
203(8")77(3-1/16")
190(7-1/2")
83.5
(3-5/16")
52
(2-1/16")
46
(1-13/16")
20.3
(13/16")
34
(1-5/16")
BM-ETA201
(optional)
BM-ETC202
(optional)
Interface Board
Video Surveillance Camera
Important
• In regard to details of the Smart Card Writer and the Smart card, refer to the
respective instruction manuals attached to merchandise.
• When a card writer is connected and a USB-RS-232C conversion connector is used,
the system may not operate normally.
• The USB connections are applicable to Windows®XP only. Operation is impossible
with Windows®2000.
• Private ID, and KnoWho are trademarks of Iridian Technologies, Inc., USA.
• iCLASS is a registered trademark of HID Corporation.
• Windows®2000 Professional, or Windows®XP Professional are registered trademarks of Microsoft Corporation in the USA and / or other countries.
• All other trademarks are the property of their respective copyright holders.
– Safety Precaution: carefully read the operating instructions and installation manual before using this product.
– Panasonic can not be responsible for network performance and/or other manufacturer products that reside on the network.
• All photographs and menu are simulated and shown for the purpose of explanation.
• Weights and dimensions are approximate. • Specifications are subject to change without notice. • This product is subject to export control regulations.
Distance Indicator
Front Panel
Mirrors
Eye Image Capturing Cameras
Audio Volume Controller
Video Surveillance Camera (Option)
Speaker
Results Indicator
Tilt Handles
Live Indicator
Front Cover
High Speed Serial Interface
*1 The third-party external power-supply should meet
the following specifications, and must be a UL Listed
access control power limited device.
Output voltage Output current capacity
12 V DC ±0.5 V 2 A or more
24 V DC ±0.5 V 1 A or more
Rated ripple voltage/Ripple noise: 150 mV [P-P] or less
Overcurrent protection: Enabled (mandatory)
*2 The recognition time may differ depending on
recognition condition.
*3
The recognition time may differ depending on capturing
conditions, network conditions, or the total number of
enrolled users.
*4 User Licence Software BM-EU30000 Series (option)
is required.
*5 Refer to the dealer for available external devices.
*6 Our exclusive protocol is employed.
*7 Refer to the dealer for available external devices.