Panasonic EH-XC10 User manual

Operating Instructions
(Household) The Facial Cleansing Brush
Model No. EH-XC10
English............................................. 3
한글 ................................................ 23
PB017051 - EH-XC10 ������_(01EN)_11-19-18.indd 1 2018/11/19 8:41:27

2
PB017051 - EH-XC10 ������_(01EN)_11-19-18.indd 2 2018/11/19 8:41:27

English
3
Contents
Safety precautions .................. 4
Parts identication ..................................9
Charging.................................................10
Before use.............................................. 11
How to use .............................................13
Cleaning .................................................16
Troubleshooting ....................................18
Battery life..............................................21
Removing the built‑in rechargeable
battery.....................................................21
Specications ........................................22
Thank you for purchasing this Panasonic product.
Before operating this unit, please read these instructions completely and save them for future use.
Operating Instructions
(Household) The Facial Cleansing Brush
Model No. EH-XC10
PB017051 - EH-XC10 ������_(01EN)_11-19-18.indd 3 2018/11/19 8:41:27

English
4
Safety precautions
To reduce the risk of injury, loss of life, electric shock,
re, and damage to property, always observe the
following safety precautions.
Explanation of symbols
The following symbols are used to classify and describe
the level of hazard, injury, and property damage caused
when the denotation is disregarded and improper use is
performed.
DANGER Denotes a potential
hazard that will result in
serious injury or death.
WARNING Denotes a potential
hazard that could result
in serious injury or death.
CAUTION Denotes a hazard that
could result in minor injury
or property damage.
The following symbols are used to classify and describe
the type of instructions to be observed.
This symbol is used to alert users to a specic
operating procedure that must not be performed.
This symbol is used to alert users to a specic
operating procedure that must be followed in
order to operate the unit safely.
WARNING
►To prevent skin or health problems
Do not use this appliance in the following body
areas or following cases.
• When you do not feel well
• After drinking alcohol or taking medicine, or when
you are very tired
• Areas with skin damage, eczema or swelling
• Areas with skin inammation, severe sunburn or
other skin abnormality
• Body areas where epilation was performed on the
same day
• Body areas where cosmetic surgery has been
performed
- Doing so may cause problems with the skin or
body.
Do not use the soft brush and pore focus brush
around the eyes.
- Doing so may cause injury to the eyes.
PB017051 - EH-XC10 ������_(01EN)_11-19-18.indd 4 2018/11/19 8:41:27

English
5
WARNING
The following persons should not use this
appliance:
• Persons with neurological disorders of the face
• Persons who have metal, silicone, or plastic implants
in their face due to bone fractures or plastic surgery
• Persons who cannot sense heat
- Doing so may cause accidents or problems.
• Persons with allergic diathesis
• Persons with skin diseases or atopic dermatitis
- Doing so may cause problems with the skin or
body.
• Menstruating or pregnant women, or within one
month of childbirth
- Doing so may cause skin problems due to natural
hormonal changes.
If you feel pain on your skin or other parts of your
body, immediately stop using this appliance.
- Failure to cease use may cause problems with
the skin or body.
►Power supply
Do not connect or disconnect the adaptor to a
household outlet with a wet hand.
- Doing so may cause electric shock or injury.
Do not immerse the AC adaptor in water or
wash it with water.
Do not place the AC adaptor over or near water
lled sink or bathtub.
Never use the appliance if the AC adaptor is
damaged or if the power plug ts loosely in a
household outlet.
Do not damage or modify, or forcefully bend,
pull, or twist the cord or the power plug. Also,
do not place anything heavy on or pinch the
cord or the power plug.
- Doing so may cause electric shock or re due to a
short circuit.
Do not use anything other than the supplied AC
adaptor for any purpose.
Also, do not use any other product with the
supplied AC adaptor. (See page 9.)
- Doing so may cause burn or re due to a short
circuit.
Do not use in a way exceeding the rating of the
household outlet or the wiring.
- Exceeding the rating by connecting too many
plugs to one household outlet may cause re due
to overheating.
Always ensure the appliance is operated on an
electric power source matched to the rated
voltage indicated on the AC adaptor.
Fully insert the adaptor or appliance plug.
- Failure to do so may cause re or electric shock.
PB017051 - EH-XC10 ������_(01EN)_11-19-18.indd 5 2018/11/19 8:41:27

English
6
WARNING
Always unplug the adaptor from a household
outlet when cleaning.
- Failure to do so may cause electric shock or
injury.
Regularly clean the power plug and the
appliance plug to prevent dust from
accumulating.
- Failure to do so may cause re due to insulation
failure caused by humidity.
Disconnect the adaptor and wipe with a dry cloth.
►Product information
This product has a built‑in rechargeable
battery. Do not throw into ame or heat. Do not
charge, use, or leave in high temperatures.
- Doing so may cause overheating, ignition, or
explosion.
Do not store within the reach of children or
infants. Do not let them use it.
- Doing so may cause an accident or injury.
Never disassemble except when disposing of
the product.
- Doing so may cause re, electric shock, or injury.
Do not modify or repair.
- Doing so may cause re, electric shock, or injury.
Contact an authorized service center for repair
(battery change etc).
►In case of an abnormality or malfunction
Immediately stop using and remove the
adaptor if there is an abnormality or
malfunction.
- Using it in such conditions may cause re, electric
shock, or injury.
<Abnormality or malfunction examples>
• The main body, adaptor or cord is deformed or
abnormally hot.
• The main body, adaptor or cord has a burning
smell.
• There is abnormal sound during use or
charging of the main body, adaptor or cord.
- Immediately request inspection or repair at an
authorized service center.
►Take care of the following precautions as well
This appliance is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instruction concerning
use of the appliance by a person responsible for
their safety. Children should be supervised to
ensure that they do not play with the appliance.
- Failure to do so may cause an accident or injury.
The supply cord cannot be replaced. If the cord
is damaged, the AC adaptor should be
scrapped.
- Failure to do so may cause an accident or injury.
PB017051 - EH-XC10 ������_(01EN)_11-19-18.indd 6 2018/11/19 8:41:27

English
7
CAUTION
►Power supply
Do not allow metal objects or trash to adhere to
the power plug or the appliance plug.
- Doing so may cause electric shock or re due to a
short circuit.
Do not wrap the cord around the adaptor when
storing.
- Doing so may cause the wire in the cord to break
with the load, and may cause re due to a short
circuit.
Disconnect the adaptor or the appliance plug
by holding onto the adaptor or the appliance
plug instead of the cord.
- Failure to do so may cause electric shock or injury.
Disconnect the adaptor from the household
outlet when not charging.
- Failure to do so may cause electric shock or re
due to electrical leakage resulting from insulation
deterioration.
►Additional precautions
Do not drop or subject to shock.
- Doing so may cause injury.
Do not use the soap with a scrub or with
peeling effect.
- Doing so may cause skin damage, color stains or
other skin issue.
Do not use the appliance in the following ways:
• Press strongly against the skin.
• Use continuously for an extended period on the
same area.
• Sharing with your family or others
- Doing so may cause injury to the skin, infection,
inammation, bleeding, burns, pigmentation or
other issue, or worsening of these symptoms.
Check for cracks, faults, deformations or other
damage prior to use.
- Failure to do so may cause injury to the skin.
Use only to care for the face, chest and
neckline (excluding throat).
- Failure to do so may cause injury or inammation
of the skin.
Note
• The following symbol indicates that a specic detachable
power supply unit is required for connecting the electrical
appliance to the supply mains. The type reference of
power supply unit is marked near the symbol.
PB017051 - EH-XC10 ������_(01EN)_11-19-18.indd 7 2018/11/19 8:41:28

English
8
Handling of the removed battery when disposing
DANGER
•The rechargeable battery is exclusively for
use with this appliance. Do not use the battery
with other products.
•Do not charge the battery after it has been
removed from the product.
•Do not throw into re or apply heat.
•Do not hit, disassemble, modify, or puncture
with a nail.
•Do not let the positive and negative terminals
of the battery get in contact with each other
through metallic objects.
•Do not carry or store the battery together with
metallic jewelry such as necklaces and
hairpins.
•Do not use or leave the battery where it will be
exposed to high temperatures, such as under
direct sunlight or near other sources of heat.
•Never peel off the tube.
- Doing so may cause overheating, ignition, or
explosion.
WARNING
After removing the rechargeable battery, do not
keep it within reach of children and infants.
- The battery will harm the body if accidentally
swallowed.
If this happens, consult a physician immediately.
If the battery uid leaks out and comes in
contact with the eyes, do not rub the eyes, and
thoroughly rinse with clean water, such as tap
water.
- Failure to do so may cause eye injury.
Consult a physician immediately.
CAUTION
If the battery uid leaks out and comes in
contact with the skin or clothes, rinse off with
clean water, such as tap water.
- Failure to do so may cause inammation.
PB017051 - EH-XC10 ������_(01EN)_11-19-18.indd 8 2018/11/19 8:41:28

English
9
Parts identication















AE
F
G
B
C
D
Back
ASoft brush
B Pore focus brush
1Silicone part
CMain body
2 Foam dispenser
3Charging indication/
notication lamp
4 Warming make-up
removal plate
5Facial cleanser
compartment
6Facial cleanser
compartment cover
7Socket
8 Socket cover
DDisplay panel
9 Facial cleanse mode
indicator
 Facial cleanse switch
(BRUSH)
 Warming make-up
removal switch
(WARM)
 Warming make-up
removal mode
indicator
EStand
F Measuring cap
GAC adaptor (RE7‑87)
Adaptor
 Power plug
Cord
Appliance plug
Notes
• You can store the brush and
measuring cap on the stand.
• The measuring cap can be
attached to the main body.
(Use this for storage of the
appliance.)
PB017051 - EH-XC10 ������_(01EN)_11-19-18.indd 9 2018/11/19 8:41:28

English
10
Charging
1
1Open the socket cover and insert
the appliance plug into the socket.
• Wipe off any water in the socket.
2
2Set the main body on the stand.
3
3Plug in the adaptor into a
household outlet.
4
4Check that the charging
indication/notication lamp glows.
The charging indication/notication
lamp glows (red).
While charging After charging is
completed
Red light glows. Red light goes off.
• Charging is completed in about 2 hours.
• The charging time may differ with the charging
capacity.
<To check if charging is completed>
If you remove and reinsert the appliance plug while
charging, the charging indication/notication lamp
glows and turns off after approximately 5 seconds.
5
5After charging is complete, unplug the adaptor
from the household outlet and unplug the
appliance plug from the main body.
(for safety and to reduce energy usage)
• There will be no problems with the main body
even if it is charged for 2 hours or more.
PB017051 - EH-XC10 ������_(01EN)_11-19-18.indd 10 2018/11/19 8:41:29

English
11
Charging precautions
The charging time may differ when the appliance is being
used for the rst time, or if it has not been used for six
months or more. The charging indication/notication lamp
may not glow during the rst few minutes after starting to
charge the appliance. Allow the appliance to continue to
charge and the charging status lamp will illuminate shortly.
• After charging for approximately 2 hours, the appliance
can be used for approximately 1 week. (per typical
usage scenario: 7 repetitions of warming make-up
removal, 7 repetitions of brush cleansing, and
2 repetitions of pore-targeted cleansing)
• Recommended ambient temperature for charging is
15 °C – 35 °C. Charging may not be possible outside
of the recommended temperature range.
• If there is crackling noise on the radio or other devices
while charging, plug the AC adaptor to another outlet to
avoid the interference.
►Charging indication/notication lamp is ashing
Charging notication
Once per second
• The battery level is
low.
Charge the
appliance.
Abnormal charging
Twice per second
• Charge the appliance within
the recommended ambient
temperature range
(15 °C – 35 °C).
Please consult with the
store where purchased or a
service center authorized by
Panasonic for repair if this
happens repeatedly.
Before use
• Read the following information on the recommended
usage frequency for best skin care results.
Warming make-up removal 3 minutes once per day
Brush cleansing 1 minute once per day
Pore-targeted cleansing
1 minute twice per week
(Optional) Exfoliation 1 minute once per week
Excessive use will have an adverse effect on the skin.
Please adjust the number of times used and usage
time depending on the appearance of your skin.
• Please remove accessories (necklaces, earrings, etc.)
before use as they may get caught during use.
• Tie hair or use a hairband or similar item to secure hair
so that it does not get caught during use.
PB017051 - EH-XC10 ������_(01EN)_11-19-18.indd 11 2018/11/19 8:41:30

English
12
Q&A
Question Answer
Can I use the
appliance while taking
a bath?
You can use the appliance
while taking a bath with
device unplugged.
What facial cleansers
can be used with this
appliance?
You can use any cream, gel,
or liquid foaming facial
cleanser. (Do not use
handmade facial cleansers,
facial cleansers containing
coarse materials for scrubbing,
or those used for exfoliation.)
What make-up
removers can be used
with this appliance?
You can use whichever oil-,
gel-, and cream-based type
of make-up remover that
works for your skin. (Do not
use make-up removers
containing coarse materials
for scrubbing or those used
for exfoliation.)
How often does the
soft brush need
replacing?
Approximately every
3 months if used once per
day.
Question Answer
How often does the
pore focus brush
need replacing?
Approximately every
6 months if used twice per
week.
How many times per
day can I use the
appliance?
You can use the warming
make-up removal and brush
cleansing modes once per
day. Use the pore-targeted
cleansing mode twice per
week.
Is it OK if the inside of
the socket cover gets
wet?
The socket is waterproof for
normal usage. Before
charging, however, wipe off
any water in the socket.
Can I also use this on
my neck?
You can use the soft brush
for 1 minute once per week.
Will the battery
deteriorate if not used
for an extended
period of time?
The battery will deteriorate if
not used for over 6 months,
so make sure to perform a
full charge at least once
every 6 months.
PB017051 - EH-XC10 ������_(01EN)_11-19-18.indd 12 2018/11/19 8:41:30

English
13
How to use
• Make sure the warming make-up removal plate is not
cracked or dirty before use.
• The appliance will not operate when connected to the
AC adaptor. The AC adaptor is used only for charging
the appliance.
Warming make‑up removal
The warming make-up removal plate loosens and easily
removes make-up.
1
1Press the warming make‑up removal switch and
select the desired temperature.
Warming make-up removal plate temperature options
Low ( ): approx. 43 °C
High ( ): approx. 48 °C
• Pressing the warming make-up removal switch
cycles through the “Power OFF” “Low ( )”
“High ( )” options.
• The temperature is always set to “Low ( )” when
the power is turned on.
• It is recommended to use the appliance at the
“Low ( )” setting when rst beginning use.
Notes
• The warming make-up removal mode indicator
ashes while warming up.
• It takes approximately 30 seconds for the
appliance to reach its usable temperature.
(Assuming a room temperature of 25 °C)
• The warming make-up removal plate temperature
varies depending on the usage environment.
• The set temperature may not be reached if the
ambient temperature is below 15 °C.
2
2Apply make‑up remover (See page 12.) to your
forehead, chin, and both cheeks.
• You can also use the appliance with make-up
remover applied directly to the warming make-up
removal plate.
3
3Once the warming make‑up removal mode
indicator starts glowing, apply the warming
make‑up removal plate to your skin and begin to
move it around your face.
• Lightly apply the warming
make-up removal plate to your
skin and glide around your face
in a circular motion from the
inside out.
Leave areas with heavy make-
up such as around eyes as the
last step to prevent the make-
up from spreading.
Be particularly gentle when using
the appliance around the eyes.
Do not try to force the warming
make-up removal plate into
hard-to-reach areas. Use your
hands to apply make-up
remover to these areas.
PB017051 - EH-XC10 ������_(01EN)_11-19-18.indd 13 2018/11/19 8:41:30

English
14
4
4After the make‑up remover has loosened the
make‑up, press the warming make‑up removal
switch to turn off the power.
• Make sure to clean the appliance with a tissue or
wash with water after every use. (See pages 16
and 17.)
• The appliance will turn off automatically
approximately 3 minutes after the warming make-
up removal mode indicator begins glowing.
Brush cleansing
Remove dead skin and dirt from pores with the gentle
ne brush and microfoam.
If you are still wearing make-up, rst remove the make-
up using the warming make-up removal mode or remove
eye make-up with your hands.
1
1Attach the soft brush by
pressing it until it clicks into
place.
2
2Open the facial cleanser
compartment and add facial
cleanser. (See page 12.)
Add the recommended amount as
indicated on your facial cleanser
product (the amount you normally
use).
3
3Fill the measuring cap with
water (approximately 4 mL)
and pour into the center of
the brush.
4 mL
Notes
• Use a foaming facial cleanser.
• Depending on the type of facial
cleanser (sticky facial cleansers,
etc.) or the amount used, the facial
cleanser may not mix properly and
clog the appliance. In rare cases,
power to the appliance may be
interrupted. (See page 18.)
• The quality of foam varies depending on the type of
facial cleanser. Adjust to the recommended amount
as indicated on your facial cleanser product, or adjust
the amount of water.
• Do not add anything other than facial cleanser into
this appliance. (Doing so may cause malfunction.)
• If you are using a non-foaming type facial cleanser,
moisten the brush and your face with water and
apply the facial cleanser directly onto your skin.
• Please pour liquid facial cleansers and the like
into the center of the brush. (Facial cleanser may
come out from the holes on the front side of the
main body when you pour it from the facial
cleanser compartment.)
PB017051 - EH-XC10 ������_(01EN)_11-19-18.indd 14 2018/11/19 8:41:31

English
15
4
4Press the facial cleanse switch and select a
mode.
Foam starts to dispense approximately 5 seconds
after turning on the appliance.
• Pressing the facial cleanse switch cycles through
the “Power OFF” “Normal ( )” “Soft ( )”
options.
• The mode is always set to “Normal ( )” when the
power is turned on.
• Wash off any excess facial cleanser on your
hands.
• Add more water if the amount of foam is insufcient.
5
5Wash your face.
• Do not apply the appliance to the same area for
extended periods of time.
• Wash your face in 3 sections as illustrated in the
following diagram for approximately 20 seconds
per section.
• You can use this appliance on your neck and upper
chest, but do not apply it to your throat.
• The appliance may not operate in an ambient
temperature lower than approximately 5 °C.
Notication timer feature
Noties you of the recommended cleansing time by
pulsing every 20 seconds.
3
12
Do not press the bristles of the
soft brush into your skin. Lightly
apply the brush to your skin so
that the bristles just touch the
skin and then wash your face in
a circular motion.
If you feel irritation even if you
are not pressing the brush into
the skin, stop using the brush.
• Do not use the brush close to
your eyes.
6
6After you have nished washing your face, press
the facial cleanse switch to turn off the power.
• Make sure to wash the appliance after use.
(See pages 16 and 17.)
• The power will be automatically turned off
approximately 1 minute after the power is turned
on.
PB017051 - EH-XC10 ������_(01EN)_11-19-18.indd 15 2018/11/19 8:41:32

English
16
Pore‑targeted cleansing
We recommend this option for rough or clogged areas
such as the nose and chin. After completing the brush
cleansing process, continue to use this option while the
foam is still on your skin.
1
1Attach the pore focus brush.
2
2Press the facial cleanse switch and
select a mode.
• Wash off any excess facial cleanser on
your hands.
3
3Wash your face.
3
12
Do not press the bristles of the
pore focus brush into your skin.
Lightly apply the brush to your
skin so that the bristles just touch
the skin and then wash your face
in a circular motion.
• Wash your nose and chin ( –) for approximately
20 seconds each.
(Notication timer feature (See page 15.))
• Do not use the brush around your eyes.
• Do not apply the appliance to the same area for
extended periods of time.
• The appliance may stop automatically for its own
protection if the foam inside it is too thick. Please
rinse the inside of the appliance lightly before using
the pore focus brush.
4
4After you have nished washing your face, press
the facial cleanse switch to turn off the power.
• Make sure to wash the appliance after use.
• The power will be automatically turned off
approximately 1 minute after the power is turned
on.
Cleaning
1
1Rinse foam off the brush with water and then
remove.
2
2Open the facial cleanser
compartment cover, begin
pouring water into the foam
dispenser, and then press the
facial cleanse switch to rinse.
• If a signicant amount of facial
cleanser remains, the power
may turn off a few seconds after
pressing the facial cleanse
switch or may not operate
smoothly. In such cases, use
warm water to clean and remove
the excess cleanser.
3
3Press the facial cleanse switch to turn off the
power.
PB017051 - EH-XC10 ������_(01EN)_11-19-18.indd 16 2018/11/19 8:41:32

English
17
4
4Rinse off all residue.
Clean the facial cleanser compartment thoroughly
as facial cleanser tends to accumulate in this area.
• If you become concerned about dirt accumulating
in the brush, apply facial cleanser to the brush and
wash it by hand.
• Do not forcefully pull the silicone part of the pore
focus brush.
Please reattach the silicone part if it becomes
detached.
5
5Shake the main body to remove excess water.
6
6Lightly wipe with a towel or
similar and place on the stand
to dry.
• Leave the facial cleanser
compartment cover open to dry.
•
You can store up to 2
attachments etc. on the stand.
• After cleaning, store in a location
with low humidity. (Storing the
appliance in an enclosed shower
or bath may cause condensation
and rust to develop inside the
main body leading to failure.)
PB017051 - EH-XC10 ������_(01EN)_11-19-18.indd 17 2018/11/19 8:41:33

English
18
Troubleshooting
Problem Possible cause Action
The power does not turn on.
The appliance has not been charged. Charge the appliance.
(See pages 10 and 11.)
The AC adaptor is connected. Disconnect the AC adaptor
before use.
The power turns off during use.
There is no power remaining in the
battery.
Charge the appliance.
(See pages 10 and 11.)
Appliance is clogged with facial
cleanser.
Use warm water to clean and
remove the cleanser.
Too much facial cleanser or sticky facial
cleanser or other inappropriate cleanser
has been used.
Clean and remove the cleanser
and then try reducing the amount
of facial cleanser.
The appliance automatically turns off
approximately 3 minutes after using the
warming make-up removal mode and
approximately 1 minute after using the
brush cleansing or pore-targeted
cleansing modes.
The appliance stops every 20 seconds
when using to wash your face. (See
page 15.)
The charging indication/
notication lamp turns off.
This lamp turns off after charging is
complete. (See page 10.)
PB017051 - EH-XC10 ������_(01EN)_11-19-18.indd 18 2018/11/19 8:41:34

English
19
Problem Possible cause Action
The charging indication/
notication lamp does not glow.
The adaptor is not inserted into the
household outlet correctly.
Correctly insert the adaptor into
the household outlet.
The appliance plug is not rmly inserted
into the socket.
Firmly insert the appliance plug
into the socket.
The appliance can only be used
for a few minutes after charging.
The battery has reached the end of its
life. (approximately 3 years) (See
page 21.)
Contact an authorized service
center for repair.
Using the soft brush does not
remove my make-up.
You did not remove make-up before
using the soft brush, or you are using
facial cleanser that does not remove
make-up well.
If you are still wearing make-up,
rst remove the make-up using
the warming make-up removal
mode or remove eye make-up
with your hands.
Using a facial cleanser designed
to remove make-up is also more
effective when using the soft
brush.
The quality or quantity of foam is
poor.
There is too much or too little water. Use the measuring cap to ll the
correct amount of water.
There is too much or too little facial
cleanser.
Adjust the amount of facial
cleanser.
You are using a facial cleanser that does
not foam well when using the
recommended amount.
Check the type of facial cleanser
used. (See page 12.)
The warming make-up removal
plate does not warm.
The appliance is being used in an
ambient temperature approximately
lower than 15 °C.
Use the appliance in an ambient
temperature approximately 15 °C
or higher.
PB017051 - EH-XC10 ������_(01EN)_11-19-18.indd 19 2018/11/19 8:41:34

English
20
Problem Possible cause Action
If you use the pore focus brush
after brush cleansing, the rotation
will be slow.
Too much foam has accumulated in the
facial cleanser compartment.
Rinse the facial cleanser
compartment with water.
(See pages 16 and 17.)
Water or foam come out around
the facial cleanser compartment,
main body holes or gaps.
• Too much water
• Too little facial cleanser
• The main body was not dried after
washing with water.
Please adjust the mixture, such
as reducing the amount of water
or increasing the amount of facial
cleanser. (See page 14.)
In addition, dry the main body
thoroughly after washing with
water. (See page 17.)
The main body has gaps in order to
allow air in to create bubbles. This
means that water and bubbles may
come out. There is no problem with
waterproofness.
If the problems still cannot be solved, contact the store where you purchased the unit or a service center authorized by
Panasonic for repair.
PB017051 - EH-XC10 ������_(01EN)_11-19-18.indd 20 2018/11/19 8:41:34