Panasonic PT-EX16K User manual

SPEC FILE
Prod ct N m b e r : PT-EX16K
Prod ct Name : LCD Projector
As of September 2011. Specifications and appearance are s bject to change witho t notice.
SFL11M011-1
1/16

SPEC FI L E
PT-EX16K
LCD Projector
As of September 2011
SFL11M011-1
2/16
Specifications
Main unit
Power supply
Power consumption
LCD panel Panel size
Display method
Pixels
Pixel configuration
Pure color control device
Lens
Lamp
Screen size
Brightness*1
Center-to-corner uniformity*1
Contrast*1
Resolution
Scanning frequency DMI/DVI-I
RGB
YPBPR(YCBCR)
Video/S-Video
Optical axis shift
ET-ELW06
ET-ELW02/ELW04/ELS03/ELM01/ELT02/ELT03
ET-ELS02
Keystone correction range
Installation
200–240 V AC, 11 A, 50/60 z (3-wire single-phase)
N TE: The projector should be connected to an independent circuit. Please consult
your electrician for more details.
1,850 W (18 W with standby mode)
46 mm (1.8 inches) diagonal (4:3 aspect ratio)
Transparent LCD panel (× 3, R/G/B)
786,432 (1,024 × 768) × 3, total of 2,359,296 pixels
Stripe
×1
Optional powered zoom/focus lenses
380 W U M lamp ×4
1.02–15.24 m (40– 600 inches) diagonally, 4:3 aspect ratio
(2.54–15.24 m (100– 600 inches) with the ET-ELS03, 4:3 aspect ratio)
16,000 lumens (four lamp, normal/auto mode, with ET-ELS03)
90%
2,500:1 (full on/full off, four lamp, auto mode, with ET-ELS03)
1,024 × 768 pixels (Input signals that exceed this resolution will be
converted to 1,024 × 768 pixels.)
f: 26 k z – 80 k z, fV: 23 z–85 z,
dot clock: 162 M z or lower
f: 15 k z–120 k z, fV: 48 z–120 z,
dot clock: 230 M z or lower
525i (480i): f 15.75 k z; fV60 z,
625i (576i): f 15.63 k z; fV50 z,
525p (480p): f 31.50 k z; fV60 z,
625p (576p): f 31.25 k z; fV50 z,
750 (720)/60p: f 45.00 k z; fV60 z,
750 (720)/50p: f 37.50 k z; fV50 z,
1035/60i: f 33.75 k z; fV60 z,
1125 (1080)/60i: f 33.75 k z; fV60 z,
1125 (1080)/50i: f 28.13 k z; fV50 z,
1125 (1080)/25p: f 28.13 k z; fV25 z,
1125 (1080)/25psf: f 28.13 k z; fV50 z,
1125 (1080)/24p: f 27.00 k z; fV24 z,
1125 (1080)/24psf: f 27.00 k z; fV48 z,
1125 (1080)/30p: f 33.75 k z; fV30 z,
1125 (1080)/30psf: f 33.75 k z; fV30 z,
1125 (1080)/60p: f 67.50 k z; fV60 z,
1125 (1080)/50p: f 56.25 k z; fV50 z
f: 15.75 k z, fV: 60 z [NTSC/NTSC4.43/PAL-M/PAL60]
f: 15.63 k z, fV: 50 z [PAL/PAL-N/SECAM]
Powered,
Vertical: ±39% from center of screen
Vertical: ±39% from center of screen,
orizontal: ±10% from center of screen
Vertical: ±50% from center of screen,
orizontal: ±10% from center of screen
Vertical: ±40° (ET-ELS03, with vertical correction only)
orizontal: ±40° (ET-ELS03, with horizontal correction only)
Ceiling/desk, front/rear

SPEC FI L E
PT-EX16K
LCD Projector
As of September 2011
SFL11M011-1
3/16
Terminals INPUT 1
DMI IN
DVI-D IN
RGB IN
R, G, B
INPUT 2
RGB IN
R, G, B
Y, PB(CB), PR(CR)
VIDEO IN
S-VIDEO IN
SERIAL IN
SERIAL OUT
REMOTE 1 IN
LAN
USB*3
Optional board slot
With ET-MD16SD1 installed
SERIAL IN (SDI IN 1/2)
SERIAL OUT (SDI OUT)
Power cord length
Cabinet materials
Dimensions (W × ×D)
Weight
Operation noise
Operating temperature
Operating humidity
Menu selection
DMI 19-pin × 1, Deep Color, DCP compatible
525i (480i), 625i (576i), 525p (480p), 625p (576p), 750 (720)/60p,
750 (720)/50p, 1035/60i, 1125 (1080)/60i, 1125 (1080)/50i,
1125 (1080)/25p, 1125 (1080)/25psf, 1125 (1080)/24p,
1125 (1080)/24psf, 1125 (1080)/30p, 1125 (1080)/30psf,
1125 (1080)/60p, 1125 (1080)/50p,
VGA (640 × 480) – WUXGA*2(1,920 × 1,200)
DVI-D 29-pin × 1, DVI 1.0 compliant, compatible with DCP, compati-
ble with single link only
525i (480i), 625i (576i), 525p (480p), 625p (576p), 750 (720)/60p,
750 (720)/50p, 1035/60i, 1125 (1080)/60i, 1125 (1080)/50i,
1125 (1080)/25p, 1125 (1080)/25psf, 1125 (1080)/24p,
1125 (1080)/24psf, 1125 (1080)/30p, 1125 (1080)/30psf,
1125 (1080)/60p, 1125 (1080)/50p,
VGA (640 × 480) – WUXGA*2(1,920 × 1,200)
D-sub D 15-pin (female) ×1
G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms;
B, R: 0.7 Vp-p, 75 ohms;
D/VD, SYNC: high impedance, TTL (positive/negative)
N TE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Menu selection
BNC × 5 (RGB/YPBPR/YCBCR× 1)
G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms;
B, R: 0.7 Vp-p, 75 ohms;
D/VD, SYNC: high impedance, TTL (positive/negative)
N TE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Y: 1.0 Vp-p (including sync signal);
PB(CB), PR(CR): 0.7 Vp-p, 75 ohms
BNC × 1, 1.0 Vp-p, 75 ohms
Mini DIN 4-pin × 1, Y: 1.0 Vp-p; C: 0.286 Vp-p, 75 ohms
D-sub 9-pin × 1, for external control (RS-232C compliant)
D-sub 9-pin × 1, for for link control
M3 jack × 1 for wired remote control
RJ-45 × 1, for network connection, 100Base-TX/10Base-T, compliant
with PJLink™
USB type-B (USB connector) ×1
× 2 (INPUT 3/4)
BNC ×2
SD-SDI signal (YCBCR4:2:2 10-bit),
SMPTE 259M-C compliant: 480i, 576i
Single-link D-SDI signal (YPBPR4:2:2 10-bit),
SMPTE 292M compliant: 720/50p, 720/60p, 1035/60i, 1080/50i,
1080/60i, 1080/25p, 1080/25psf, 1080/24p, 1080/24psf,
1080/30p, 1080/30psf
BNC × 1, active through
3.0 m (9 ft 10 in)
Molded plastic (PC + ABS)
650 mm × 349 mm*4× 815 mm
(25-19/32 × 13-3/4*4× 32-3/32 inches) (without lens)
Approximately 46.5 kg (102.5 lbs) (without lens)
51 dB (lamp power: normal/eco 2), 48 dB (lamp power: eco 1)
5°–40°C (41°–104°F)*5
20%–80% (no condensation)

SPEC FI L E
PT-EX16K
LCD Projector
As of September 2011
SFL11M011-1
4/16
Weights and dimensions shown are approximate. Specifications subject to change without notice.
*1 Measurement, measuring conditions, and method of notation all comply with IS 21118 international standards.
*2 WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking).
*3 This port is for use by service personnel only. The USB interface may not operate with all USB compatible equipment.
*4 With legs at shortest position.
*5 The operating temperature range is 5°C–30°C (41°F–86°F) when used at the place where is between 1,800 m and 2,700 m (5,906 ft and 8,858 ft)
above sea level.
*6 peration range differs depending on environments.
Remote control unit
Power supply
Operation range*6
Dimensions (W × × D)
Weight
Supplied accessories
ptional accessories
Zoom lens (1.2 –1.5:1)
Zoom lens (1.4 –1.8:1)
Zoom lens (1.5–2.0:1)
Zoom lens (2.0 –2.6:1)
Zoom lens (2.6 –3.5:1)
Zoom lens (3.5 –4.5:1)
Zoom lens (4.4 –6.2:1)
Zoom lens (6.3 –9.0:1)
Fixed focus lens (0.8:1)
D/SD-SDI board
Ceiling mount bracket
Bracket assembly
Smoke cut filter unit
Replacement smoke cut filter
Replacement lamp unit
Replacement filter unit
3 V DC (R03/LR03/AAA type battery × 2)
Approximately 5 m (16 ft 5 in) when operated from directly in front of
the signal receptor
48 × 145 × 27 mm (1-7/8˝ × 5-23/32˝ × 1-1/16˝)
Approx. 102 g (3.6 oz) (including batteries)
Power cord × 1 (× 2 for PT-EX16KE)
Power cord holder/power cord cover (× 1 set)
Wireless/wireled remote control unit (× 1)
Batteries for remote control (AAA/R03/LR03 type × 2)
VGA cable (× 1)
Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring
& Control Software, Real Color Manager Pro) (× 1)
Lens attachment (× 1 set)
Lens lock lever fixing bracket (× 1 set)
Lightshielding plate (× 3 set)
Spacer (× 1 set)
Cable tie (× 3)
ET-ELW06
ET-ELW02
ET-ELW04
ET-ELS02
ET-ELS03
ET-ELM01
ET-ELT02
ET-ELT03
ET-ELW03
ET-MD16SD1
ET-PKE16 (for high ceilings)
ET-PKE16S (for low ceilings)
ET-PKE16B
ET-SFE16
ET-SRE16
ET-LAE16
ET-RFE16

815
(32-3/32)
176
(6-15/16)
48 (1-7/8 )
301
(11-28-32)
349 (13-3/4)
325
(12-25/32)
275
(10-13/16)
275
(10-13/16)
115
(4-17/32)
620 (24-13/32)
650 (25-19/32)
25
(31/32)
Dimensions
unit : mm (inch)
N TE: This illustration is not drawn to scale.
SPEC FI L E
PT-EX16K
LCD Projector
As of September 2011
SFL11M011-1
5/16
Terminals
123 4
11
10
9
8
7
6
5
1 DVI-D input
2 DMI input
3 RGB input
4 RGB input / Video input
5 S-Video input
6 LAN connector
7 Remote input
8 Serial output
9 USB connector
10 Serial input
11 Optional board slots

SPEC FI L E
PT-EX16K
LCD Projector
As of September 2011
SFL11M011-1
6/16
Standard setting-up position
Projected image
Lower edge of projected image
Upper edge of projected image
Projected image
889–1249*2
*2
*2
*2
(35– 49-3/16)
1172–1532
(146-5-32–60-5/16)
428.5
∅70
25
(31/32)
90
(16-7/8)
386.5*1
(15-7/32)
(2-3/4)
(3-17/32)
90
(3-17/32)
340
(13-3/8)
90
(3-17/32)
90 (3-17/32)
340
(13-3/8)
L
L
L
HH
unit : mm (inch)
*1 When the lens protrudes to the maximum.
A: 69 mm (2-23/32˝) with the ET-ELW06
22 mm (7/8˝) with the ET-ELW02
45 mm (1-25/32˝) with the ET-ELW04
49 mm (1-15/16˝) with the ET-ELS02
81 mm (3-3/16˝) with the ET-ELS03
1 mm (1/32˝) with the ET-ELM01
67 mm (2-5/8˝) with the ET-ELT02
293 mm (11-17/32˝) with the ET-ELT03
57 mm (2-1/4˝) with the ET-ELW03
*2 Adjustable in 60 mm (2-3/8˝) steps.
N TE:
Illustrations show the projector i -
nstalled using optional ceiling mount
bracket ET-PKE16H and bracket assem-
bly ET-PKE16B.
This illustration is not drawn to scale.
[m] / [in]
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
0.60
0.77
0.94
1.10
1.27
1.44
1.60
1.94
2.44
3.27
4.10
4.94
6.60
8.27
9.94
1.17
1.49
1.81
2.12
2.44
2.76
3.08
3.71
4.66
6.25
7.83
9.42
12.59
15.76
18.93
1.42
1.80
2.18
2.56
2.93
3.31
3.69
4.44
5.57
7.46
9.35
11.23
15.00
18.78
22.55
1.56
1.98
2.40
2.82
3.24
3.66
4.08
4.92
6.18
8.28
10.38
12.48
16.68
20.88
25.07
1.99
2.53
3.08
3.63
4.18
4.72
5.27
6.36
8.00
10.74
13.47
16.21
21.68
27.15
32.61
–
–
–
–
–
–
7.10
8.56
10.73
14.36
18.00
21.63
28.89
36.15
43.41
3.69
4.58
5.48
6.38
7.28
8.18
9.08
10.88
13.57
18.07
22.56
27.05
36.04
45.03
54.01
5.11
6.35
7.58
8.82
10.05
11.28
12.52
14.99
18.69
24.86
31.03
37.20
49.54
61.88
74.22
7.58
9.38
11.19
13.00
14.80
16.61
18.42
22.03
27.45
36.49
45.52
54.55
72.62
90.69
108.76
0.91
1.16
1.40
1.65
1.89
2.13
2.38
2.87
3.60
4.82
6.04
7.26
9.69
12.13
14.57
1.07
1.36
1.65
1.94
2.23
2.52
2.81
3.39
4.26
5.71
7.16
8.61
11.51
14.41
17.30
1.15
1.47
1.79
2.12
2.44
2.76
3.08
3.72
4.69
6.29
7.90
9.51
12.72
15.94
19.15
1.48
1.90
2.32
2.74
3.16
3.58
4.00
4.85
6.11
8.21
10.32
12.42
16.63
20.84
25.05
–
–
–
–
–
–
5.22
6.30
7.92
10.61
13.31
16.00
21.39
26.79
32.18
2.87
3.56
4.26
4.95
5.65
6.34
7.04
8.42
10.51
13.98
17.45
20.92
27.87
34.81
41.76
3.75
4.63
5.51
6.39
7.27
8.14
9.02
10.78
13.42
17.82
22.22
26.62
35.42
44.22
53.02
5.27
6.50
7.73
8.96
10.19
11.42
12.65
15.11
18.80
24.94
31.09
37.24
49.53
61.83
74.12
1.02
1.27
1.52
1.78
2.03
2.29
2.54
3.05
3.81
5.08
6.35
7.62
10.16
12.70
15.24
40
50
60
70
80
90
100
120
150
200
250
300
400
500
600
Screen size
(diagonal) Zoom Fixed-focus
Distance to screen (L)
ET-ELW02
Zoom lens
min. max. min. max. max. max.min. min. min. max. min. max. min. max. min. max.
ET-ELW06
Zoom lens
ET-ELW04
Zoom lens
ET-ELS02
Zoom lens
ET-ELS03
Zoom lens
ET-ELM01
Zoom lens
ET-ELT02
Zoom lens
ET-ELT03
Zoom lens
ET-ELW03
Fixed-focus
lens
Projection distance for 4:3 aspect ratio screen
unit: meters
N TE:
• The value for L (distance to screen) varies slightly depending on the zoom lens characteristics.
• At the shortest projection distance, the zoom lens characteristics may cause slight image distortion.
• When keystone correction is used, the image is corrected in the direction that reduces its projected size.

SPEC FI L E
PT-EX16K
LCD Projector
As of September 2011
SFL11M011-1
7/16
[m] / [in]
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
2.0
2.5
3.1
3.6
4.2
4.7
5.2
6.4
8.0
10.7
13.5
16.2
21.7
27.1
32.6
3.8
4.9
5.9
7.0
8.0
9.1
10.1
12.2
15.3
20.5
25.7
30.9
41.3
51.7
62.1
4.7
5.9
7.2
8.4
9.6
10.9
12.1
14.6
18.3
24.5
30.7
36.8
49.2
61.6
74.0
5.1
6.5
7.9
9.3
10.6
12.0
13.4
16.1
20.3
27.2
34.1
40.9
54.7
68.5
82.3
6.5
8.3
10.1
11.9
13.7
15.5
17.3
20.9
26.2
35.2
44.2
53.2
71.1
89.1
107.0
–
–
–
–
–
–
23.3
28.1
35.2
47.1
59.1
71.0
94.8
118.6
142.4
12.1
15.0
18.0
20.9
23.9
26.8
29.8
35.7
44.5
59.3
74.0
88.7
118.2
147.7
177.2
16.8
20.8
24.9
28.9
33.0
37.0
41.1
49.2
61.3
81.6
101.8
122.0
162.5
203.0
243.5
24.9
30.8
36.7
42.7
48.6
54.5
60.4
72.3
90.1
119.7
149.3
179.0
238.3
297.5
356.8
3.0
3.8
4.6
5.4
6.2
7.0
7.8
9.4
11.8
15.8
19.8
23.8
31.8
39.8
47.8
3.5
4.5
5.4
6.4
7.3
8.3
9.2
11.1
14.0
18.7
23.5
28.2
37.8
47.3
56.8
3.8
4.8
5.9
7.0
8.0
9.1
10.1
12.2
15.4
20.6
25.9
31.2
41.7
52.3
62.8
4.9
6.2
7.6
9.0
10.4
11.7
13.1
15.9
20.0
26.9
33.9
40.7
54.6
68.4
82.2
–
–
–
–
–
–
17.1
20.7
26.0
34.8
43.7
52.5
70.2
87.9
105.6
9.4
11.7
14.0
16.2
18.5
20.8
23.1
27.6
34.5
45.9
57.3
68.6
91.4
114.2
137.0
12.3
15.2
18.1
21.0
23.9
26.7
29.6
35.4
44.0
58.5
72.9
87.3
116.2
145.1
174.0
17.3
21.3
25.4
29.4
33.4
37.5
41.5
49.6
61.7
81.8
102.0
122.2
162.5
202.9
243.2
1.02
1.27
1.52
1.78
2.03
2.29
2.54
3.05
3.81
5.08
6.35
7.62
10.16
12.70
15.24
40
50
60
70
80
90
100
120
150
200
250
300
400
500
600
Screen size
(diagonal) Zoom Fixed-focus
Distance to screen (L)
ET-ELW02
Zoom lens
min. max. min. max. max. max.min. min. min. max. min. max. min. max. min. max.
ET-ELW06
Zoom lens
ET-ELW04
Zoom lens
ET-ELS02
Zoom lens
ET-ELS03
Zoom lens
ET-ELM01
Zoom lens
ET-ELT02
Zoom lens
ET-ELT03
Zoom lens
ET-ELW03
Fixed-focus
lens
Projection distance for 4:3 aspect ratio screen
unit: feet
N TE:
• The value for L (distance to screen) varies slightly depending on the zoom lens characteristics.
• At the shortest projection distance, the zoom lens characteristics may cause slight image distortion.
• When keystone correction is used, the image is corrected in the direction that reduces its projected size.
[m] / [in]
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
0.31
0.39
0.46
0.54
0.61
0.69
0.77
0.92
1.15
1.53
1.91
2.29
3.05
3.81
4.58
0.55
0.68
0.82
0.95
1.09
1.23
1.36
1.63
2.04
2.72
3.40
4.07
5.43
6.79
8.14
0.61
0.77
0.92
1.07
1.22
1.38
1.53
1.83
2.29
3.05
3.81
4.58
6.10
7.62
9.15
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0.07
0.09
0.11
0.12
0.14
0.16
0.17
0.21
0.26
0.34
0.42
0.51
0.68
0.84
1.01
1.02
1.27
1.52
1.78
2.03
2.29
2.54
3.05
3.81
5.08
6.35
7.62
10.16
12.70
15.24
40
50
60
70
80
90
100
120
150
200
250
300
400
500
600
Screen size
(diagonal) Zoom lenses Fixed-focus lens
Height from the edge of screen to center of lens (H)
ET-ELW03
min. max. min. max.
ET-ELW06/ELW02/ELW04/
ELS03/ELM01/ELT02/ELT03
ET-ELS02
4
Projection distance for 4:3 aspect ratio screen:
Height from the edge of screen to center of lens (H)
unit: meters
[m] / [in]
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
1.0
1.3
1.5
1.8
2.0
2.3
2.5
3.0
3.8
5.0
6.3
7.5
10.0
12.5
15.0
1.8
2.2
2.7
3.1
3.6
4.0
4.5
5.3
6.7
8.9
11.2
13.4
17.8
22.3
26.7
2.0
2.5
3.0
3.5
4.0
4.5
5.0
6.0
7.5
10.0
12.5
15.0
20.0
25.0
30.0
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0.2
0.3
0.4
0.4
0.5
0.5
0.6
0.7
0.9
1.1
1.4
1.7
2.2
2.8
3.3
1.02
1.27
1.52
1.78
2.03
2.29
2.54
3.05
3.81
5.08
6.35
7.62
10.16
12.70
15.24
40
50
60
70
80
90
100
120
150
200
250
300
400
500
600
Screen size
(diagonal) Zoom lenses Fixed-focus lens
Height from the edge of screen to center of lens (H)
ET-ELW03
min. max. min. max.
ET-ELW06/ELW02/ELW04/
ELS03/ELM01/ELT02/ELT03
ET-ELS02
4
unit: feet
N TE:
• When keystone correction is used, the image is corrected in the direction that reduces its projected size.
N TE: When the fixed-focus lens ET-ELW03 is mounted, the optical lens shift function cannot be used.

SPEC FI L E
PT-EX16K
LCD Projector
As of September 2011
SFL11M011-1
8/16
Calculation of the projection distance
For a screen size different from the above, use the equation below to calculate the projection distance.
Aspect ratio 4:3
Zoom lenses
ET-ELW06 minimum L (m) = (diagonal screen size in inches) × 0.024389 – 0.065097
maximum L (m) = (diagonal screen size in inches) × 0.031710 – 0.099560
ET-ELW02 minimum L (m) = (diagonal screen size in inches) × 0.028982 – 0.089642
maximum L (m) = (diagonal screen size in inches) × 0.037722 – 0.089627
ET-ELW04 minimum L (m) = (diagonal screen size in inches) × 0.032144 – 0.139232
maximum L (m) = (diagonal screen size in inches) × 0.041988 – 0.123040
ET-ELS02 minimum L (m) = (diagonal screen size in inches) × 0.042086 – 0.208493
maximum L (m) = (diagonal screen size in inches) × 0.054690 – 0.203992
ET-ELS03 minimum L (m) = (diagonal screen size in inches) × 0.053914 – 0.175760
maximum L (m) = (diagonal screen size in inches) × 0.072616 – 0.163096
ET-ELM01 minimum L (m) = (diagonal screen size in inches) × 0.069440 + 0.086800
maximum L (m) = (diagonal screen size in inches) × 0.089871 + 0.086816
ET-ELT02 minimum L (m) = (diagonal screen size in inches) × 0.087982 + 0.221978
maximum L (m) = (diagonal screen size in inches) × 0.123396 + 0.173741
ET-ELT03 minimum L (m) = (diagonal screen size in inches) × 0.122945 + 0.350492
maximum L (m) = (diagonal screen size in inches) × 0.180688 + 0.343253
Zoom lenses
ET-ELW03 minimum L (m) = (diagonal screen size in inches) × 0.016666 – 0.067361
N TE:
Distances calculated with the above equations will include a slight error.
H
(Width of
projected image)
V
(Height of
projected image)
0.39V
0.39V
Standard postition of
projected image
H
(Width of
projected image)
V
(Height of
projected image)
0.39V
0.50V
0.50V
0.39V
0.1H0.1H
Standard postition of
projected image
Shift range
Optical axis shift function allows to shift the position of a projected image as shown below.
H
(Width of
projected image)
V
(Height of
projected image)
0.28V
0.39V
0.39V
0.28V
0.1H0.1H
Standard postition of
projected image
• When the ET-ELW02/ELW04/
ELS03/ELM01/ELT02/ELT03 is
mounted
• When the ET-ELW06 is
mounted
• When the ET-ELS02 is
mounted

SPEC FI L E
PT-EX16K
LCD Projector
As of September 2011
SFL11M011-1
9/16
360°
-10°
+10°
Installable angle
Install the projector at an angle within the range shown below.
• Vertical direction
The projector may be installed at a vertical
angle of 360°.
• Horizontal direction
The projector may be installed at a horizontal
angle of ±10°.

SPEC FI L E
PT-EX16K
LCD Projector
As of September 2011
SFL11M011-1
10/16
List of compatible signals
The signals that can be input to this projector are shown in the table below. orizontal scanning fre-
quencies of 15 k z to 100 k z (15 k z to 120 k z for RGB signals), vertical scanning frequencies of
24 z to 120 z (48 z to 120 z for RGB signals), and a dot clock of 162 M z maximum (230 M z
maximum for RGB signals) can be input.
N TE: The native resolution of this projector is 1,024 × 768 pixels. If the display resolution of the input signal is different from the
native resolution, image compression or expansion will be used to convert the input signal to a level within the native resolution.
Display mode Display
resolution
(dots)*1
Scanning frequency
H
(kHz)
V
(kHz)
Dot clock
frequency
(MHz)
Format
720 × 480i
720 × 576i
720 × 480i
720 × 576i
720 × 480i
720 × 576i
640 × 480i
768 × 576i
640 × 480
768 × 575
1280 × 720
1920 × 1035i
1920 × 1080i
1920 × 1080
640 × 400
640 × 480
720 × 400
640 × 480
800 × 600
832 × 624
1024 × 768
1024 × 768i
1024 × 768
15.7
15.6
15.7
15.6
31.5
31.3
15.7
15.6
31.5
31.3
37.5
45.0
33.8
28.1
33.8
27.0
28.1
33.8
56.3
67.5
33.8
28.1
27.0
31.5
31.5
37.5
37.9
37.9
43.3
31.5
35.0
35.0
32.7
34.5
35.2
37.9
37.9
38.0
38.6
46.9
48.1
53.7
49.7
43.4
44.0
46.9
47.0
48.4
48.5
58.0
56.5
60.0
60.3
61.0
62.0
63.5
68.7
35.5
36.0
60.2
59.9
50.0
59.9
50.0
60.0
50.0
60.0
50.0
59.9
50.0
50.0
60.0
60.0
50.0
60.0
24.0
25.0
30.0
50.0
60.0
60.0
50.0
48.0
70.1
59.9
75.0
72.8
74.4
85.0
70.1
66.6
66.7
51.1
55.4
56.3
60.3
61.0
60.5
60.3
75.0
72.2
85.1
74.6
60.1
54.6
58.2
58.3
60.0
60.0
72.0
70.1
75.0
74.9
75.7
77.1
79.4
85.0
87.0
87.2
75.1
–
–
27.0
27.0
27.0
27.0
12.3
14.8
25.2
29.5
74.3
74.3
74.3
74.3
74.3
74.3
74.3
74.3
148.5
148.5
74.3
74.3
74.3
28.3
25.2
31.5
31.5
31.5
36.0
25.1
31.3
30.2
32.7
36.4
36.0
40.0
40.0
40.1
38.6
49.5
50.0
56.3
57.3
65.0
59.1
63.0
61.7
65.0
65.2
74.7
75.0
78.8
79.3
81.0
84.4
83.4
94.5
44.9
47.3
80.0
NTSC/NTSC4.43/PAL-M/PAL60
PAL/PAL-N/SECAM
525i (480i)
625i (576i)
525p (480p)
625p (576p)
525i (480i)
625i (576i)
525p (480p)
625p (576p)
720p
1035i
1080i
1080p
1080psf/30
1080psf/25
1080psf/24
VGA
MAC LC13
MAC13
SVGA
MAC16
XGA
MAC19
VIDEO/S-VIDEO
HDMI
HDMI/DVI-D
YPBPR/RGB
HDMI/DVI-D/
YPBPR/RGB
RGB
HDMI/DVI-D/RGB
RGB
HDMI/DVI-D/RGB
RGB
HDMI/DVI-D
RGB
*1 The “i” appearing after the resolution indicates an interlaced signal.

SPEC FI L E
PT-EX16K
LCD Projector
As of September 2011
SFL11M011-1
11/16
List of compatible signals
Display mode Display
resolution
(dots)*1
Scanning frequency
H
(kHz)
V
(kHz)
Dot clock
frequency
(MHz)
Format
1280 × 768
1280 × 800
1360 × 768
1366 × 768
1376 × 768
1152 × 870
1152 × 900
1280 × 960
1280 × 1024
1280 × 1024i
1280 × 960
1280 × 1024
1400 × 1050
1440 × 900
1600 × 1200
1680 × 1050
1920 × 1200
47.8
60.3
68.6
41.2
49.6
49.7
58.3
56.0
57.7
60.0
62.8
64.0
71.6
47.7
56.2
46.5
48.4
68.7
64.2
61.2
61.9
71.4
60.0
60.3
62.5
63.3
63.4
63.7
63.8
63.9
64.0
71.7
77.0
80.0
81.1
91.1
46.4
50.0
50.0
75.0
80.0
62.5
64.0
64.0
64.7
65.1
65.3
65.4
55.9
74.9
75.0
81.3
87.5
93.8
106.3
65.3
74.0
74.6
59.9
74.9
84.8
50.0
60.1
59.8
70.0
70.0
72.0
72.0
74.9
60.0
84.9
60.0
72.0
50.0
60.0
75.1
70.4
65.2
66.0
75.6
60.0
58.1
58.6
60.0
60.0
60.0
60.2
60.0
60.0
67.2
72.0
75.0
76.1
85.0
86.7
86.0
94.0
75.1
75.1
58.6
60.0
60.2
59.9
59.9
60.0
60.1
59.9
60.0
60.0
65.0
70.0
75.0
85.0
60.0
59.9
59.9
79.5
102.3
117.5
68.6
79.4
83.5
98.9
95.0
97.8
102.8
106.5
108.0
122.5
86.7
100.2
67.4
86.7
1000.0
94.6
92.0
94.5
105.1
108.0
93.1
108.0
108.2
111.5
109.5
108.2
107.4
108.0
117.0
130.1
135.0
135.0
157.5
78.7
80.0
80.0
126.0
135.2
108.0
108.2
108.0
101.0
122.4
121.8
122.9
106.5
161.9
162.0
175.5
189.0
202.5
229.5
146.3
154.0
193.3
WXGA
MAC21
SXGA
MAC
SXGA+
WXGA+
UXGA
UXGA*2
WSXGA+
WUXGA
WUXGA*2
HDMI/DVI-D/RGB
HDMI/DVI-D
HDMI/DVI-D/RGB
RGB
HDMI/DVI-D
RGB
HDMI/DVI-D/RGB
RGB
HDMI/DVI-D/RGB
RGB
HDMI/DVI-D/RGB
RGB
HDMI/DVI-D/RGB
RGB
*1 The “i” appearing after the resolution indicates an interlaced signal.
*2 The “REAL” mode of “SCREEN” setting cannot be operated for these modes.

SPEC FI L E
PT-EX16K
LCD Projector
As of September 2011
SFL11M011-1
12/16
Serial connector
The serial connector complies with RS-232C. To control the projector from a personal computer, com-
mands must be input through communication software, based on the format and satisfying the commu-
nication conditions shown below.
Basic format
Transmission from the computer begins with STX, then the ID, command, parameter, and ETX are sent
in this order. Add parameters according to the details of control.
Communication conditions (factory setting)
Pin assignments and signal names
5
96
1
D-sub 9-pin (male)
Serial input
Serial output
Description
NC
Received data
Transmitted data
NC
Ground
Signal name
–
RXD
TXD
–
GND
No.
1
2
3
4
5
Description
NC
NC
NC
NC
Signal name
–
–
–
–
No.
6
7
8
9
1
69
5
D-sub 9-pin (male)
Description
NC
Received data
Transmitted data
NC
Ground
Signal name
–
RXD
TXD
–
GND
No.
1
2
3
4
5
Description
NC
NC
NC
NC
Signal name
–
–
–
–
No.
6
7
8
9
CAUTI N
• It may not be possible to send or receive commands for about 10 to 60 seconds when the lamp is first turned on. If this occurs, wait for 60 sec-
onds, then try sending or receiving again.
• When sending multiple commands, be sure to wait for at least 0.5 second after receiving a response from the projector before sending the next
command.
• Additional time is sometimes required for response due to processing inside the projector. Set the time-out period for command response to 10
seconds or more.
• When using two or more units, set different IDs for each unit.
Start
(1 byte)
End
(1 byte)
Colon
(1 byte)
Semicolon
(1 byte)
ID designator:
01 to 06: Projector ID number
ZZ: All units (ID ALL)
ID 2 characters
(2 bytes)
(2 bytes)
Parameters
(undefined length)
Command
(3 bytes)
(Control and/or query commands)
STX ETXC1P1P2...PnC2ADI1I2 C3:;
Signal level
Synchronization method
Baud rate
Parity
Character length
Stop bit
X parameter
S parameter
RS-232C-compliant
Start-stop synchronization
19,200 bps
None
8 bits
1 bit
None
None
N TE: STX and ETX are character codes. Expressed in hexidecimals,
STX is 02 and ETX is 03.

SPEC FI L E
PT-EX16K
LCD Projector
As of September 2011
SFL11M011-1
13/16
Cable specifications
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
PC (DTE)Projector
NC
NC
NC
NC
NC
NC
NC
NC NC
NC NC
NC
Control commands
Command : Parameter Function Callback
PON
POF
IIS:HD1
IIS:DVI
IIS:DVI
OED:1
IIS:RG1
IIS:SCT
IIS:RG2
IIS:RG2
ORF:1
IIS:VID
IIS:SVD
IIS:AU1,SD1
IIS:AU1,SD2
IIS:AU2,SD1
IIS:AU2,SD2
LPM:0
LPM:3
LPM:2
LPM:1
OLP:2
OLP:0
OLP:3
OLP:4
OSH:0
OSH:1
OFZ:1
OFZ:0
OAS
VSE:0
VSE:6
VSE:2
VSE:40
VSE:5
VSE:50
VPM:STD
VPM:DYN
VPM:CIN
VPM:REA
On
Off
Input １[HDMI]
Input １[DVI (PC)]
Input １[DVI (AV HDCP)]
Input １[RGB (PC)]
Input １[RGB (Scart)]
Input 2 [RGB]
Input 2 [RGB(Y･PB(CB)･PR(CR))]
Input 2 [Video]
Input 2 [S-Video]
Input 3 [SDI1] * with the ET-MD16SD1 only
Input 3 [SDI2] * with the ET-MD16SD1 only
Input 4 [SDI1] * with the ET-MD16SD1 only
Input 4 [SDI2] * with the ET-MD16SD1 only
Four lamps
Two lamps (auto)
Two lamps (lamp 2 + 3)
Two lamps (lamp 1 + 4)
Auto
Normal
Eco 1
Eco 2
Off
On
On
Off
Normal
Full
Wide (16:9)
Zoom
Real
Custom
Standard
Dynamic
Cinema
Real
Standby power
Input
Lamp mode
Lamp power
Shutter
Freeze
Auto setup
Screen (aspect)
Picture
PON
POF
IIS:HD1
IIS:DVI
IIS:DVI
OED:1
IIS:RG1
IIS:SCT
IIS:RG2
IIS:RG2
ORF:1
IIS:VID
IIS:SVD
IIS:AU1,SD1
IIS:AU1,SD2
IIS:AU2,SD1
IIS:AU2,SD2
LPM:0
LPM:3
LPM:2
LPM:1
OLP:2
OLP:0
OLP:3
OLP:4
OSH:0
OSH:1
OFZ:1
OFZ:0
OAS
VSE:0
VSE:6
VSE:2
VSE:40
VSE:5
VSE:50
VPM:STD
VPM:DYN
VPM:CIN
VPM:REA
*1 Do not send P N, P F or SH commands continuously in a short period of time. Doing so may burst the lamp or shorten the lamp replace-
ment cycle.
*2 When a command that cannot be executed during standby mode is sent, the projector will send an ER401 command in reply.

SPEC FI L E
PT-EX16K
LCD Projector
As of September 2011
SFL11M011-1
14/16
Status request commands
Command:Parameter Function DescriptionCallback
QPW
QIN
QIN
QED
QIN
QIN
QED
QIN
QSL
QLP
QSH
QFZ
QSE
QPM
QST
Q$L:1
Q$L:2
Q$L:3
Q$L:4
QTM:0
QTM:2
Main power status
Input signal status
Lamp operation mode status
Lamp power mode status
Shutter function status
Freeze function status
Aspect mode status
Picture mode status
Projector run time
Lamp 1 run time
Lamp 2 run time
Lamp 3 run time
Lamp 4 run time
Temperature status
Off
On
Input １[HDMI]
Input １[DVI (PC)]
Input １[DVI (AV HDCP)]
Input １[RGB (PC)]
Input １[RGB (Scart)]
Input 2 [RGB]
Input 2 [RGB(Y･PB(CB)･PR(CR))]
Input 2 [Video]
Input 2 [S-Video]
Input 3 [SDI1] * with the ET-MD16SD1 only
Input 3 [SDI2] * with the ET-MD16SD1 only
Input 4 [SDI1] * with the ET-MD16SD1 only
Input 4 [SDI2] * with the ET-MD16SD1 only
Four lamps
Two lamps (auto)
Two lamps (lamp 2 + 3)
Two lamps (lamp 1 + 4)
Auto
Normal
Eco 1
Eco 2
Off
On
On
Off
Normal
Full
Wide (16:9)
Zoom
Real
Custom
Normal
Full
Standard
Dynamic
Cinema
Real
00000 – 99999 hours
0000 – 9999 hours
0000 – 9999 hours
0000 – 9999 hours
0000 – 9999 hours
Air intake
Panel section
000
001
HD1
DVI
2
DVI
1
RG1
SCT
RG2
0
RG2
1
VID
SVD
AU1,SD1
AU1,SD2
AU2,SD1
AU2,SD2
0
3
2
1
2
0
3
4
0
1
0
1
0
6
2
40
5
50
0
6
STD
DYN
CIN
REA
p1p2p3p4p5
p1p2p3p4
p1p2p3p4
p1p2p3p4
p1p2p3p4
p1p2p3p4/p5p6p7p8 *1
p1p2p3p4/p5p6p7p8 *1
*1 p1p2p3p4 = Celsius (°C), p5p6p7p8 = Fahrenheit (°F)
N TE: If a wrong command is received, the projector will send an ER401 or ER402 command to the computer.
Command example
To set the shutter function on, send the command as shown below.
ADZZ OSH : 1;ETX
ID Address
ZZ: ID ALL
Command
STX
Start
Character code 02
Parameter End
Character code 03
N TE: When sending commands without parameters, a colon (:) is not necessary.

SPEC FI L E
PT-EX16K
LCD Projector
As of September 2011
SFL11M011-1
15/16
Notes on projector placement and operation
The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the
following precautions.
1. Make sure there is an unobstructed space of 1,000 mm (3 feet 3 inches) or more around the pro-
jector’s exhaust openings.
2. Do not stack projector units directly on top of one another for the purpose of multiple (stacked)
projection. When stacking projector units, be sure to provide the amount of space indicated below
between them.
3. Make sure that nothing blocks the projector’s air intake and exhaust openings. Also, install the pro-
jector so that cool or hot air from other air conditioning equipment does not flow directly toward the
projector’s air intake or exhaust openings.
4. Do not install the projector in an enclosed space. If it is necessary to install it in an enclosed
space, add a separate ventilation system. If ventilation is insufficient, hot air will accumulate at the
intake opening. This may cause the projector’s protective circuit to interrupt projector operation.
5. If the projector is installed in an enclosed space, ensure that the projector’s intake and exhaust
openings are not blocked. Take particular care to ensure that hot air from the exhaust openings is
not sucked into the intake openings.
1,000 mm (3 ft 3 in)
or more
1,000 mm (3 ft 3 in)
or more
1,000 mm (3 ft 3 in)
or more
1,000 mm
(3 ft 3 in)
or more
Intake
Exhaust
Direction of air intake and exhaust

SPEC FI L E
PT-EX16K
LCD Projector
As of September 2011
SFL11M011-1
16/16
perating the projector continuously
1. If the projector is to be operated continuously 24 hours, use the lamp relay mode. The projector cannot
be operated continuously 24 hours in quad-lamp mode.
2. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short
periods.
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Product availability differs depending on region and country. This product may be subject to export control regulations.
All other trademarks are the property of their respective trademark owners.