Specifications (Tentative)
Power supply
Power consumption
LCD panel
Panel size
PT-FW100NTU
PT-F100NTU/
PT-F100U
Display method
Drive method
Pixels
PT-FW100NTU
PT-F100NTU/
PT-F100U
Pixel configuration
Lens
Lamp
Projection size
Colors
Brightness
PT-FW100NTU
PT-F100NTU/
PT-F100U
Resolution (RGB)
PT-FW100NTU
PT-F100NTU/
PT-F100U
Scanning frequency
RGB
YPBPR
S-Video/Video
Throw distance
PT-FW100NTU
PT-F100NTU/
PT-F100U
100-240 V AC, 50/60 Hz
360 W (Approx. 4 W in standby
mode with fan stopped)
0.74" (18.8 mm) diagonal
(16:10 aspect ratio)
0.7" (17.78 mm) diagonal
(4:3 aspect ratio)
Transparent LCD panel (x 3, R/G/B)
Active matrix
1,024,000 (1,280 x 800) x 3,
total of 3,072,000 pixels
786,432 (1,024 x 768) x 3,
total of 2,359,296 pixels
Stripe
Manual zoom (1:1-1:2), manual
focus, F 1.7-2.6, f 21.6-43.0 mm
250 W UHM™ lamp
33-300 inches/838-7,620 mm
diagonally (16:10 aspect ratio)
Full color (16,777,216 colors)
3,000 lumens
3,200 lumens
1,280 x 800 pixels (1,600 x 1,200
pixels with compression)
1,024 x 768 pixels (1,600 x 1,200
pixels with compression)
Horizontal: 15-91 kHz,
Vertical: 50-85 Hz
480i (525i): fH15.75 kHz; fV60 Hz
576i (625i): fH15.63 kHz; fV50 Hz
480p (525p): fH31.5 kHz; fV60 Hz
576p (625p): fH31.25 kHz; fV50 Hz
720/60p (750/60p):
fH45 kHz; fV60 Hz
1080/60i (1125/60i):
fH33.75 kHz; fV60 Hz
1080/50i (1125/50i):
fH28.125 kHz; fV50 Hz
NTSC, NTSC4.43, PAL-M, PAL60:
fH15.75 kHz; fV60 Hz
PAL, SECAM, PAL-N:
fH15.63 kHz; fV50 Hz
1.1 m-17.2 m (3'7"-56'5") (16:10)
1.2 m-18.1 m (3'11"-59'4") (4:3)
Optical axis shift
PT-FW100NTU
PT-F100NTU/
PT-F100U
Keystone correction
range
On-screen menu
Installation
Built-in speakers
Terminals
COMPUTER 1 IN
COMPUTER 2 IN/COMPUTER 1 OUT
COMPONENT IN
VIDEO IN
S-VIDEO IN
AUDIO IN (COMPUTER 1)
AUDIO IN (COMPUTER 2)
AUDIO IN (COMPONENT/VIDEO/S-VIDEO)
AUDIO OUT
SERIAL
REMOTE
LAN
Power cord length
Cabinet material
Dimensions (W x H x D)*2
Weight
Operating environment
Temperature
Humidity
Vertical: ±51%, horizontal: ±24%
Vertical: ±50%, horizontal: ±32%
Vertical: ±30°
17 languages: English, French,
German, Spanish, Italian, Korean,
Russian, Chinese, Japanese,
Swedish, Norwegian, Danish,
Portuguese, Polish, Hungarian,
Czech, and Thai
Front/rear ceiling/desk
(menu selection)
4 cm (round), x 1,
3.0 W (monaural) output power
D-sub HD 15-pin x 1
R, G, B: 0.7 Vp-p, 75 ohms, Sync
on green: 1.0 Vp-p, 75 ohms
HD/SYNC, VD: TTL (positive/negative
polarity compatible)
D-sub HD 15-pin x 1 (input/output
selectable using on-screen menu)
R, G, B: 0.7 Vp-p, 75 ohms, Sync
on green: 1.0 Vp-p, 75 ohms
HD/SYNC, VD: TTL (positive/negative
polarity compatible)
RCA pin x 3, Y: 1.0 Vp-p (including
sync signal), 75 ohms; PB/CB, PR/CR:
0.7 Vp-p, 75 ohms
RCA pin x 1, 1.0 Vp-p, 75 ohms
Mini DIN 4-pin x 1,
Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms
M3 (stereo) x 1, 0.5 Vrms
M3 (stereo) x 1, 0.5 Vrms
RCA pin (L, R) x 1, 0.5 Vrms
M3 (stereo) x 1, 0-2.0 Vrms
(variable)
D-sub 9-pin x 1 (RS-232C)
D-sub 9-pin x 1
RJ-45 x 1,
10BASE-T/100BASE-TX/1000BASE-T
2 m (6'7")
Molded plastic (ABS/PC)
432 x 124.5 x 319 mm
(17" x 4-29/32" x 12-9/16")
6.2 kg (13.7 lbs.)
0°-40°C (32°-104°F)
20%-80% (no condensation)
Wireless remote control unit
Power supply
Operation range*3
Dimensions (W x H x D)
Weight
Wireless LAN
Standard
Transmission
IEEE802.11b
IEEE802.11g
Modulation system
IEEE802.11b
IEEE802.11g
Transmission speed
IEEE 802.11b
IEEE 802.11g
Operation range*3
Frequency range
PT-FW100NTE/FW100NTEA/F100NTE/F100NTEA
PT-FW100NTU/F100NTU
Channels
PT-FW100NTE/FW100NTEA/F100NTE/F100NTEA
PT-FW100NTU/F100NTU
3 V DC (AA battery x 2)
Approx. 10 m (32.8 feet) when
operated from directly in front of
the signal receptor
48 x 163 x 24.5 mm
(1-7/8" x 6-13/32" x 31/32")
145 g (5.1 oz) (including batteries)
IEEE802.11b/g
Direct sequence spread spectrum
(DSSS) system
Orthogonal frequency division
multi-plex (OFDM) system
CCK (11/5.5 Mbps), DQPSK (2
Mbps), DBPSK (1 Mbps)
64-QAM (54/48 Mbps), 16-QAM
(36/24 Mbps), QPSK (18/12 Mbps),
BPSK (9/6 Mbps)
11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps
54 Mbps, 48 Mbps, 36 Mbps,
24 Mbps, 18 Mbps, 12 Mbps,
9 Mbps, 6 Mbps
Approx. 30 m (98'5")
2,412 MHz-2,472 MHz
2,412 MHz-2,462 MHz
1-13 ch
1-11 ch
To use wireless functions, a PC is required that meets the conditions given below:
OS: Microsoft®Windows®2000 Professional, Windows®XP Professional,
Windows®XP Home Edition
CPU: Intel®Pentium®III or higher, or other compatible processor (1 GHz or
higher is recommended)
Memory: 256 MB or more
Free hard disk space: 60 MB or more
CD-ROM drive: CD-ROM drive or DVD drive
Wireless LAN: IEEE 802.11b/g compatible (Built-in wireless LAN system or external IEEE
802.11b/g LAN card must be installed and running normally.)
NOTE: Some IEEE 802.11g/b wireless LAN may not allow connection to the projector.
Wired LAN connector: RJ-45
NOTE: Use Category 5e (or higher) cables for 1000BASE-T connection.
Supplied Accessories
• Power cord
• Wireless remote control
• Batteries for remote control
• Wireless Manager ME 4.0 (CD-ROM)
• Safety wire rope
Optional Accessories
ET-LAF100 Replacement lamp unit
ET-RFF100 Replacement filter unit
ET-PKF100H Ceiling mount bracket for high ceilings
ET-PKF100S Ceiling mount bracket for low ceilings
NO T E S O N U S E
• The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp
may break, emitting a large sound, or fail to illuminate, due to impact or extended use. The
length of time that it takes for the lamp to break or fail to illuminate varies greatly depending
on individual lamp characteristics and usage conditions.
• The brightness of the lamp will gradually decrease with use.
• The projector includes consumable parts. The frequency of replacement for the lamp and other
consumable parts will increase if the projector is subjected to extended, continuous use. For
details, please consult a service representative.
*1: In AI mode. *2: Including protruding parts.
*3: Operation range differs depending on the environment.
