Panasonic SB-PC930P User manual

ORDERNO. MD0412609C0
A6
Speaker System
SB-PC930P
Colour
(S)... Silver Type
SPECIFICATIONS
Specification
Type 2way, 3speaker system (Bass
reflex)
Speaker unit(s) Impedance 4
1. Woofer 6.5cm (2-1/2”) Conetype
2. Woofer 6.5cm (2-1/2”) Conetype
3. Tweeter 6 cm (2-3/8”) Ring shapeddome
type
Input power (IEC) 260 W*(Max)
Output sound pressure 82 dB/W(1.0m)
Cross over frequency 5 kHz
Frequencyrange 110 Hz - 50 kHz (-16 dB)
140 Hz - 45 kHz (-10 dB)
Dimensions(WxH xD) 320 mm x88 mm x96 mm
(12-19/32” x3-15/32” x3-25/32”)
Mass 1.36 kg(3lbs)
Notes :
1. Specificationsaresubject to changewithoutnotice.
2. Mass and dimensionsareapproximate.
SB-HT930P-S consistsof : SB-FS930P-S (x2), SB-FS931P-S (x
2)
and SB-PC930P-S (x1)
2004 Matsushita ElectricIndustrial Co. Ltd.. All rights reserved.
1
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

Unauthorized copying and distribution isaviolation of law.
1. System Combination
System SC-HT930P-S SC-HT930PC-S
Music Center SA-HT930P-S SA-HT930PC-S
Front Speakers SB-FS930P-S
Surround Speakers SB-FS931P-S
Centre Speaker SB-PC930P-S
Active Subwoofer SB-WA930PP-S
System SC-HT930PX-S
Music Center SA-HT930PX-S
Front Speakers SB-FS930P-S
Surround Speakers SB-FS931P-S
Centre Speaker SB-PC930P-S
Active Subwoofer SB-WA930PX-S
System SC-HT930EE-S SC-HT930GCTS SC-HT930GN-S SC-HT935EE-S
Music Center SA-HT930EE-S SA-HT930GCTS SA-HT930GN-S SA-HT935EE-S
Front Speakers SB-FS930P-S
Surround
Speakers SB-FS880EB-S
Centre Speaker SB-PC930P-S
Active
Subwoofer SB-WA930EE-S SB-WA930GCTS SB-WA930GN- SSB-WA935EE- S
2
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

System SC-HT930GC-S SC-
HT930GCSS SC-HT930GS-S
Music Center SA-HT930GC-S SA-
HT930GCSS SA-HT930GS-S
Front Speakers SB-FS930P-S
Surround
Speakers SB-FS880EB-S
Centre Speaker SB-PC930P-S
Active
Subwoofer SB-WA930GC-S
System SC-HT880EB-S SC-HT880WEBS
Music Center SA-HT880EB-S SA-HT880WEBS
Front Speakers SB-FS930P-S
Surround Speakers SB-FS880EB-S
Centre Speaker SB-PC930P-S
Active Subwoofer SB-WA880EB-S
System SC-HT880GN-S SC-HT880WGNS
Music Center SA-HT880GN-S SA-HT880WGNS
Front Speakers SB-FS930P-S
Surround Speakers SB-FS880EB-S
Centre Speaker SB-PC930P-S
Active Subwoofer SB-WA880GN-S
System SC-HT880E-S SC-HT880EG-S SC-
HT880WEGS
Music Center SA-HT880E-S SA-HT880EG-S SA-
HT880WEGS
Front Speakers SB-FS930P-S
Surround
Speakers SB-FS880EB-S
Centre Speaker SB-PC930P-S
Active Subwoofer SB-WA880EG-S
2. Disassembly Process
2.1. Disassemblyof the Front Panel
3
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

Step1: Remove 8 screws fromthe RearCabinet Assembly.
Step2: Pushthe Front Panel forwardtodetachfromthe RearCabinet Assemblyas arrow
shownabove.
2.2. Disassemblyof the Woofer 1
-Repeat step 1to step 2initem 2.1.
Step1: Detachthe wires (+) redand (-) black fromthe Woofer1.
4
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

Step2: Remove 4 screws fromthe Woofer1.
2.3. Disassemblyof the Woofer 2
-Repeat step 1to step 2initem 2.1.
Step1: Detachthe wires (+) black and (-) black fromthe Woofer2.
Step2: Remove 4 screws fromthe Woofer2.
2.4. Disassemblyof the Tweeter
-Repeat step 1to step 2initem 2.1.
5
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

Step1: Detachthe wires (+) grayand (-) black fromthe Tweeter.
Step2: Remove 4 screws fromthe Tweeter.
2.5. Disassemblyof the Terminal
-Repeat step 1to step 2initem 2.1.
Step1: Detachthe wires (+) redand (-) black fromthe Terminal.
6
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

Step2: Remove 1 screwfromthe Terminal.
Step3: Remove the Terminal fromthe RearCabinet Assembly.
3. Connection of the Speaker Cables
-Besure to connect speaker cables before connecting the AC
power supplycord.
-The load impedance of anyspeaker used with thisunitmust be 4 .
-Besure to connect the cablefrom the right speaker to the right
terminal and the cablefrom the left speaker to the left terminal.
1. Stripoff the outer covering, and twist the center conductor. Make
sure the bare ends of the wires are not unravelled. (Iftheyare,
twist them tight again.)
2. Insert the wire to the rear panel of the unitand close the lever.
7
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

Notes :
-To prevent damage to circuitry, never short-circuitpositive (+)and
negative (-) speaker wires.
-Besure to connect onlypositive (copper) wires to positive (+)
terminalsand negative (silver) wires to negative (-) terminals.
Incorrect connection can damage the speakers.
4. Connection of Wiring Diagram
5. Cabinet Parts Location
8
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

6. Replacement Parts List
Notes :
-Important safetynotice :
When replacing anyof these components, be sure to use only
manufacturer’sspecified parts showninthe parts list.
-[M] indicates inthe Remarks columns indicates parts supplied by
PAVCSG.
Ref. No. PartNo. PartName& Description Remarks
CABINETAND CHASSIS
1RYBX0082-H REAR CABINETASS’Y [M]
1-1 K4BC02B00017 TERMINAL JACK [M]
1-2 XTB3+10GFJ SCREW [M]
2RYBX0090-S FRONTPANEL ASS’Y [M]
3XTB3+6GFJ SCREW (TWEETER) [M]
4XTB3+12GFJ SCREW (REAR CAB) [M]
5RGNX0275-K SPEC LABEL [M]
6RKA0072-KJ LEG CUSHION [M]
7REEX0437 NETWORK ASS’Y [M]
8REEX0457 TRANSITWIRE [M]
CAPACITOR
C1 ECEA1HAY1R8 1.8uf50V [M]
PACKING MATERIALS
P1 RPNX0304 POLYFOAM [M]
P2 RPFX0110 MIRAMATBAG [M]
SPEAKERS
9
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

Ref. No. PartNo. PartName& Description Remarks
SP1 EAST6PH17D6 TWEETER [M]
SP2 L0AA06A00015 WOOFER [M]
7. Packaging
FLE0412W/S
10
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com