Panasonic SC-HT930P-S User manual

ORDERNO. MD0412607C0
A6
Speaker System
SB-FS930P
Colour
(S)... Silver Type
SPECIFICATIONS
Specification
1
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

Type 2way, 3speaker system (Bass
reflex)
Speaker unit(s) Impedance 6
1. Woofer 8 cm (3-1/8”) Conetype
2. Woofer 8 cm (3-1/8”) Conetype
3. Tweeter 6 cm (2-3/8”) Ring shapeddome
type
Input power (IEC) 170 W*(Max)
Output sound pressure 84 dB/W(1.0m)
Cross over frequency 7kHz
Frequencyrange 75 Hz - 50 kHz (-16 dB)
90 Hz - 45 kHz (-10 dB)
Dimensions(WxH xD) 260 mm x1234 mm x270 mm
(10-1/4” x48-19/32” x10-21/32”)
Mass 4.35 kg(9.6lbs)
Notes :
1. Specificationsaresubject to changewithoutnotice.
2. Mass and dimensionsareapproximate.
SB-HT930P-S consistsof : SB-FS930P-S (x2), SB-FS931P-S (x
2)
and SB-PC930P-S (x1)
2004 Matsushita ElectricIndustrial Co. Ltd.. All rights reserved.
Unauthorized copying and distribution isaviolation of law.
1. System Combination
System SC-HT930P-S SC-HT930PC-S
Music Center SA-HT930P-S SA-HT930PC-S
Front Speakers SB-FS930P-S
Surround Speakers SB-FS931P-S
Centre Speaker SB-PC930P-S
Active Subwoofer SB-WA930PP-S
2
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

System SC-HT930PX-S
Music Center SA-HT930PX-S
Front Speakers SB-FS930P-S
Surround Speakers SB-FS931P-S
Centre Speaker SB-PC930P-S
Active Subwoofer SB-WA930PX-S
System SC-HT930EE-S SC-HT930GCTS SC-HT930GN-S SC-HT935EE-S
Music Center SA-HT930EE-S SA-HT930GCTS SA-HT930GN-S SA-HT935EE-S
Front Speakers SB-FS930P-S
Surround
Speakers SB-FS880EB-S
Centre Speaker SB-PC930P-S
Active
Subwoofer SB-WA930EE-S SB-WA930GCTS SB-WA930GN- SSB-WA935EE- S
System SC-HT930GC-S SC-
HT930GCSS SC-HT930GS-S
Music Center SA-HT930GC-S SA-
HT930GCSS SA-HT930GS-S
Front Speakers SB-FS930P-S
Surround
Speakers SB-FS880EB-S
Centre Speaker SB-PC930P-S
Active
Subwoofer SB-WA930GC-S
System SC-HT880EB-S SC-HT880WEBS
Music Center SA-HT880EB-S SA-HT880WEBS
Front Speakers SB-FS930P-S
Surround Speakers SB-FS880EB-S
Centre Speaker SB-PC930P-S
Active Subwoofer SB-WA880EB-S
System SC-HT880GN-S SC-HT880WGNS
Music Center SA-HT880GN-S SA-HT880WGNS
Front Speakers SB-FS930P-S
Surround Speakers SB-FS880EB-S
Centre Speaker SB-PC930P-S
Active Subwoofer SB-WA880GN-S
3
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

System SC-HT880E-S SC-HT880EG-S SC-
HT880WEGS
Music Center SA-HT880E-S SA-HT880EG-S SA-
HT880WEGS
Front Speakers SB-FS930P-S
Surround
Speakers SB-FS880EB-S
Centre Speaker SB-PC930P-S
Active Subwoofer SB-WA880EG-S
2. Disassembly Process
2.1. Disassemblyof the Front Panel
Step1: Remove 12 screws fromthe RearCabinet Assembly.
4
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

Step2: Pushthe Front Panel forwardtodetachfromthe RearCabinet Assemblyas arrow
shownabove.
2.2. Disassemblyof the Woofer 1
-Repeat step 1to step 2initem 2.1.
Step1: Detachthe wires (+) redand (-) blue fromthe Woofer1.
5
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

Step2: Remove 4 screws fromthe Woofer1.
2.3. Disassemblyof the Woofer 2
-Repeat step 1to step 2initem 2.1.
Step1: Detachthe wires (+) blue and (-) grayfromthe Woofer2.
6
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

Step2: Remove 4 screws fromthe Woofer2.
2.4. Disassemblyof the Tweeter
-Repeat step 1to step 2initem 2.1.
Step1: Detachthe wires (+) yellowand (-) black fromthe Tweeter.
7
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

Step2: Remove 4 screws fromthe Tweeter.
2.5. Disassemblyof the Terminal
-Repeat step 1to step 2initem 2.1.
Step1: Detachthe wires (+) redand (-) grayfromthe Terminal.
8
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

Step2: Remove 1 screwfromthe Terminal.
Step3: Remove the Terminal fromthe RearCabinet Assembly.
2.6. Disassemblyof the Pipe
9
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

Step1: Disconnect the wires (+) copperand (-) silverfromthe Terminal as arrowshown.
Step2: Pull out the SpeakerCable fromthe groove.
Step3: Remove 2 screws fromthe RearCabinet Assembly.
Step4: Pull out the SpeakerCable fromBase CoverGroove.
Step5: Remove 2 screws fromthe Pipe.
Step6: Detachthe Pipe fromPipe Support.
10
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

Step7: Detachthe SpeakerCable fromBase Assembly.
3. Connection of the Speaker Cables
-Besure to connect speaker cables before connecting the AC
power supplycord.
-The load impedance of anyspeaker used with thisunitmust be 6 .
-Besure to connect the cablefrom the right speaker to the right
terminal and the cablefrom the left speaker to the left terminal.
1. Stripoff the outer covering, and twist the center conductor. Make
sure the bare ends of the wires are not unravelled. (Iftheyare,
twist them tight again.)
2. Insert the wire to the rear panel of the unitand close the lever.
Notes :
-To prevent damage to circuitry, never short-circuitpositive (+)and
negative (-) speaker wires.
-Besure to connect onlypositive (copper) wires to positive (+)
terminalsand negative (silver) wires to negative (-) terminals.
Incorrect connection can damage the speakers.
11
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

4. Connection of Wiring Diagram
5. Cabinet Parts Location
12
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

13
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

6. Replacement Parts List
Notes :
-Important safetynotice :
When replacing anyof these components, be sure to use only
manufacturer’sspecified parts showninthe parts list.
-[M] indicates inthe Remarks columns indicates parts supplied by
PAVCSG.
Ref. No. PartNo. PartName& Description Remarks
CABINETAND CHASSIS
1RYFX0144-H REAR CABINETASS’Y [M]
1-1 K4BC02B00017 TERMINAL [M]
3XTB3+12GFJ SCREW [M]
4RYBX0088-S FRONTPANEL ASS’Y [M]
5XTB3+8GFJ SCREW [M]
6RGNX0274-K SPEC LABEL [M]
7REEX0445 TRANSITWIRE [M]
8RYQX0190-S PIPE ASS’Y [M]
9RYQX0191-S STAND BASE ASS’Y [M]
9-1 RKA0164-K LEG CUSHION [M]
9-2 RGPX0192-S BASE COVER [M]
10 XSN5+35FJ SCREW [M]
11 RHD30090-1 SCREW [M]
CAPACITORS
C1 ECEA1HAY2R2 2.2uf50V [M]
C2 ECA1HAY120S 12uf50V [M]
PACKING MATERIALS
P1 RPNX0303 POLYFOAM(SET) [M]
P1 RPNX0306A POLYFOAM(BASE) [M]
P2 RPFX0116 MIRAMAT(SPEAKER) [M]
P2 RPFX0119 MIRAMAT(BASE) [M]
P2 RPFX0126 MIRAMAT(PIPE) [M]
ACCESSORIES
A1 REE1203G-J SPEAKER WIRE(8M) [M]
SPEAKERS
SP1 EAST6PH17D6 TWEETER [M]
SP2 EAS8P184A WOOFER [M]
7. Packaging
14
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

15
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

FLE0412W/S
16
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com