Panasonic PN28240i-NZ User manual

 Thank you for purchasing our product.
 This document provides important information about safe and proper
operations of this Ethernet Switch.
 Please read the "Important Safety Instructions" on pages from 3 to 5.
 Any problems or damages resulting from disassembly of this Ethernet Switch
by customers are not covered by the warranty.
I0818-50822 Printed in Japan
Switch-M24eGi
Installation Guide
Model No. PN28240i-TH
PN28240i-MY
PN28240i-ID
PN28240i-SG
PN28240i-NZ
 The instruction manuals (Menu Version, CLI Version,
Web Version), latest firmware and SDN application
(ZEQUO assist Plus) can be downloaded from the following URL.
https://panasonic.co.jp/ew/pewnw/english/datadownload/index.html
2-12-7, Higashi-Shimbashi, Minato-ku, Tokyo Japan, 105-0021
©
Panasonic Electric Works Networks Co.,Ltd.
Panasonic Electric Works Networks Co.,Ltd. 2022

2
Contents
Important Safety Instructions
Basic Instructions for the Use of This Product
1 Product Outline
1.1 Features
1.2 Specifications
1.3 Accessories
1.4 Basic operation
2 Part Names and Functions
2.1 LED display change
3 Installation and Configuration
3.1 Grounding Cable Connection
3.2 Mounting on a wall
3.3 Mounting to rack
3.4 Configuration of IP address (Basic)
Troubleshooting
3
6
7
7
8
9
9
10
13
15
15
16
17
18
20

3
This chapter contains important safety instructions for preventing bodily injury
and/or property damage. Please read carefully, and follow them at all times.
This symbol indicates a potential hazard
that could result in serious injury or death.
 Severity of bodily injury and/or property damage, which could result from incorrect
use of the Ethernet Switch, are explained below.
 The following symbols are used to classify and describe the type of instructions to
be observed.
Important Safety Instructions
WARNING
CAUTION This symbol indicates safety instructions.
Deviation from these instructions could lead
to bodily injury and/or property damage.
This symbol is used to alert
users what they must do.
This symbol is used to alert
users what they must not do.
WARNING
Do not use power supply other than AC 100 - 240 V.
Deviation could lead to fire, electric shock, and/or equipment failure.
Do not handle this Ethernet Switch and connection cables during a
thunderstorm.
Deviation could lead to electric shock.
Do not disassemble and/or modify this Ethernet Switch.
Deviation could lead to fire, electric shock, and/or equipment failure.
Do not damage the power cord. Do not bend too tightly, stretch, twist, bundle
with other cord, pinch, put under a heavy object and/or heat it.
Damaged power cord could lead to fire, and/or electric shock.
Do not handle the power cord with wet hand.
Deviation could lead to electric shock, and/or equipment failure.
Do not insert, or drop any foreign objects such as metal or combustible things
into Ethernet Switch from the openings or twisted pair ports.
Deviation could lead to fire, electric shock, and/or equipment failure.
Do not store or use the Ethernet Switch in places where it might get splashed
with liquids such as water, in places with high humidity, with conductive dust,
or in places where there are corrosive and combustible gases.
Deviation could lead to fire, electric shock, and/or equipment failure.
Do not place this Ethernet Switch under direct sunlight and/or high
temperature.
Deviation could lead to high internal temperature and fire.
Do not install this Ethernet Switch at the location with continuous vibration or
strong shock, or at the unstable location.
Deviation could lead to falling, injury and/or equipment failure.

4
CAUTION
WARNING
Use the bundled power cord (AC 100 – 240 V specifications).
Deviation could lead to electric shock, malfunction, and/or equipment failure.
Unplug the power cord in case of equipment failure.
Deviation, such as keep connecting for a long time, could lead to fire.
Be sure to connect the ground cable.
Otherwise this might cause electrical shocks, misoperations and malfunctions.
Connect the Ethernet Switch via the supplied power cord to the outlet which is
connected to the ground.
If the outlet is not connected to the ground, connect the ground cable (AWG18:
green/yellow) to the ground terminal screw.
Connect the power cord firmly to the power port.
Deviation could lead to electric shock,fire, and/or malfunction.
If the STATUS (Status) LED blinking in orange (systemtfault), unplug the
power cord since this is a malfunction.
Deviation, such as keep connecting for a long time, could lead to fire.
Handle the Ethernet Switch carefully so that fingers or hands may not be
damaged by twisted pair port, SFP extension slot, console port, or power cord
hook block.
Do not put the Ethernet Switch into fire.
Deviation could lead to explosion and/or fire.
If the device is going to be used in high temperature environments, do not
perform the following operations with bare hands.
- Relocating the installation area, transporting, and attaching, and removing
attachment brackets, etc.
- Connecting and disconnecting twisted pair cables, fiber optic cables, SFP modules
and console cables
- Attaching, and removing power cords
- Operating LED display change buttons
Deviation could lead to injuries or burns, etc. because of high temperatures.
Do not connect equipments other than 10BASE-T/100BASE-TX/1000BASE-T to
twisted pair port.
When connecting to a 10BASE-T device, use a Cat5 or above cable.
Deviation could lead to equipment failure.
Do not insert any other modules into the SFP extension slots (ports 23 and 24)
except for our optional SFP modules (PN54022/PN54024).
Deviation could lead to equipment failure.
Check our website for the latest information on supported SFP modules.

CAUTION
5
 Check whether the optical fiber cable connectors are contaminated with dust, etc.
This might cause the optical signal to not be transmitted normally, and cause
misoperations and malfunctions. If they are contaminated, make sure to clean
them off, then connect them to the optical fiber ports.
This Ethernet Switch is to be periodically serviced in order to maintain its
performance.
Please assign a product administrator, and be sure to implement periodic mainte-
nance. When doing maintenance, check the inspection chart that is posted on our
website which has the requisite items listed on it.
When using this Ethernet Switch to design systems, use it after applying
appropriate measures such as setting up redundant configurations.
Communication failures might be generated due to causes such as malfunctions or
misoperations while the Ethernet Switch is being used.
When using this Ethernet Switch for applications which require extremely high
reliability, be careful to expend all possible means to ensure safety and
reliability.
This Ethernet Switch is not designed or manufactured with the intention that it be
used for applications (in use with railways, aviation, and medical care, etc. where
the influence rate due to communication failures is extremely high in regard to
systems that directly affect systems and human lives) which require extremely high
reliability.
Be aware of glitches which are caused in the usage environments such as
age-related degradation, etc.
This may vary depending upon conditions such as utilisation rates and usage
environments, but performance might decrease due to the age-related
degradation, etc. of components. It is recommended that this Ethernet Switch be
replaced about five years after it was installed.
Be careful in regards to environmental restrictions whereby the Ethernet
Switch can be used.
Please isolate the business power lines and communication lines. Isolate distribution
lines and other distribution lines, and low current power lines, optical fiber cables,
metallic water conduits, and gas conduits, etc. Noise may be generated in the
communication lines which might cause communication glitches.

Be careful when performing the following operations since the device will be at high
temperatures immediately after it has been energized or the power has been shut off.
- Relocating the installation area, transporting, and attaching, and removing
attachment brackets, etc.
-
Connecting and disconnecting twisted pair cables, fiber optic cables, SFP modules and console cables
- Attaching, and removing power cords
- Operating LED display change buttons
Deviation could lead to injuries or burns, etc. because of high temperatures.

Basic Instructions for the Use of This Product
2. The contents described in this document may be changed without prior notice. For the
latest version, please refer to the Panasonic website.
3. For any question, please contact the retailer where you purchased the product.
6
1. Please note that Panasonic shall not bear any liability whatsoever for any damages
(this shall include, but isnotlimited to,lost earnings,lost opportunities, etc.)
which were generated in relation to damages caused by operations and usage,
or the inability to use this Ethernet Switch, whereby the customer does not follow
this Installation Guide.
For inspection and/or repair, consult the retailer.
Use commercial power supply from a wall socket, which is close and easily accessible to this
Ethernet Switch.
Unplug the power cord when installing or moving this Ethernet Switch.
Unplug the power cord when cleaning this Ethernet Switch.
Use this Ethernet Switch within the specifications. Deviation could lead to malfunction.
Do not touch the twisted pair cable modular metal terminals which are connected to RJ45
connectors (twisted pair ports) or the connectors, nor place them near electrically-charged
objects. Static electricity could lead to equipment failure.
Do not put the modular plug of the connected twisted pair cable on objects that can carry
static charge, such as carpet. Do not place it in the proximity. Static electricity could lead to
equipment failure.
Do not put a strong shock, including dropping, to this Ethernet Switch. Deviation could lead
to equipment failure.
Before connecting a console cable to the console port, discharge static electricity, for example
by touching metal appliance (do not discharge by touching this Ethernet Switch).
Do not store and/or use this Ethernet Switch in the environment with the characteristics listed
below.
(Store and/or use this Ethernet Switch in the environment in accordance with the
specification.)
- High humidity. Possible spilled liquid (water).
- Dusty. Possible static charge (such as carpet).
- Under direct sunlight.
- Possible condensation. High/low temperature exceeding the specifications environment.
- Strong vibration and/or strong shock.
Please use this Ethernet Switch in place where ambient temperature is from 0 to 60°C.
Failure to satisfy the conditions above may result in a fire, electric shock, equipment failure,
and/or malfunction. Such events are not covered by the warranty.
Do not block the ventilator of the Ethernet Switch.
Blocked ventilator induces the heat accumulation inside, causing equipment failure and/or
malfunction.
 If any module other than the optional SFP extension modules(PN54022/PN54024) is inserted
into the SFP extension slot,operation is not guaranteed.For the latest information about
compatible SFP extension modules,check our website.
When using two Ethernet Switches, do not stack them. When you place them side by side,
allow for a space of 20 mm or more between them.

Product Outline
Switch-M24eGi is an all Giga bit Ethernet Layer 2 Ethernet Switch with management
function having 24 ports of 10/100/1000BASE-T and two pairs of 10/100/1000BASE-T
port and SFP extension slot, one of which is selectable.
1
7
1.1 Features
Has wire speed layer 2 switching functions.
Ports 1 to 22 are auto negotiation-ready 10/100/1000BASE-T ports. Their speed and
communication mode can be changed by configuration.
Ports 23 and 24 can be used as a 10/100/1000BASE-T port corresponding to autone-
gotiation or an SFP extension slot exclusively.
Also their speed and communication mode can be switched by configuration.
All twisted pair ports support straight/cross cable auto sensing function. Simply
connect devices with straight cables, whether it is a terminal or a network device.
(This function does not work if the port communication configuration is set at Fixed
or Link Aggregation. Ports 1 to 22 are set at MDI-X. (default))
Due to the loop detection/shutoff function, a port where loop has occurred can be
automatically shut off to prevent loop failures. When a port is shut off and recovered
automatically, SNMP trap can be sent to notify the incident to the administrator.
Moreover, the port with a loop can be identified by loop notification on the LEDs on
the main unit and referring the history of loop on the setting screen.
Has a loop detection history function, which notifies when a loop occurs with the
corresponding LED and enables a network administrator to identify the looped port
after the loop is removed.
Fanless design solves noise problem or fan failure.
Power consumption can be suppressed by switching off the port LEDs (left) via the
ECO mode LED functions.
The IEEE802.1p compatible QoS function is supported.
Has an Internet Mansion function, which ensures security between each door.
Has a port grouping function, which groups ports that are allowed to communicate
with one another to limit communications between different groups.
Equipped with energy efficient Ethernet (EEE) conforming to IEEE802.3az(LPI). When
there is no data transmission at link up, the energy-saving state automatically starts
so that power consumption can be reduced on each port.
Factory default : Disable
Embedded power saving mode detects the connection status automatically and saves
power consumption to minimum.
Factory default : Disable

IEEE802.1Q VLAN tagging is supported, and a maximum of 256 VLANs can be registered.
 The IEEE802.1X compatible user authentication function (EAP-MD5/TLS/PEAP) is supported.
Each single port supports IEEE 802.1X, Web, and MAC authentication protocols,
eliminating the need for individually setting the ports’ authentication parameters.

Supports ZEQUO assist Plus. Processes from introduction to maintenance can be performed easily.

1.2 Specifications
8
Product Outline
1
SNMP v1/v2c/v3, Telnet, SSH (v2), WEB, CLI
Other
Link aggregation
Interface
Switching mode Store and Forward method: Forwarding rate
10BASE-T: Max. 14,880 pps/port
100BASE-TX: Max. 148,800 pps/port
1000BASE-T/1000BASE-X: Max. 1,488,000 pps/port
MAC Address table: Max. 8K entry/unit
Buffer: 512K Bytes/unit
＊EAP frame,BPDU frame transmission
IEEE802.3ad Link aggregation function (STATIC)
Configurable up to 8 groups (Max. 8 ports per group)
VLAN IEEE802.1Q tagging VLAN (256 groups max.)
Port based VLAN, Internet mansion function
QoS
Port monitoring
Management method
1:n
Loop detection Ports 1-22: ON, Ports 23, 24: OFF (default setting)
Port shut-off time: 60 -86400 sec (default setting is 60 sec)
Port history hold time: 3 days
Power supply AC 100-240 V, 50/60 Hz, 0.5 A
Power consumption Normally, Max. 15.4 W, Min. 5.6 W
Storage environment
Mass (Weight)
External dimensions 44 mm (Height) × 330 mm (Width) × 230 mm (Depth) (Excluding
protruding sections)
Operating environment
Supports the IEEE802.1X authentication(MAC-based, port-based)
MAC authentication, WEB authentication, Triple authentication
Storm control function, multi-cast address group registration function,
DDM function, IPv6 supported
IEEE802.1p compatible, Supports 4 priority queues
Temperature: 0–60°C, Humidity: 20–80% RH (no condensation)
(Warning) Failure to satisfy the conditions above may result in a
fire,electric shock,equipment failure,and/or malfunction.
Such events are not covered by the warranty.
Temperature: -20–70°C, Humidity: 10–90% RH (no condensation)
＊For detailed specifications,refer to the product’ s specifications.
Twisted pair port 1-24:RJ45 connecter
Transmitting and receiving network system
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
Energy Efficient Ethernet function
IEEE 802.3az(LPI)
SFP extension slot port23, 24
Transmitting and receiving network system
IEEE 802.3z 1000BASE-X
＊RJ45 or SFP either exclusive use
SFF-8472 (DMI:Diagnostic Monitoring Interface)
Console port:RJ45 connecter
RS-232C(ITU-TS V.24)
2,300g
Port grouping functions
ZEQUO assist Plus (Supplied from Panasonic’s website)
Fan Not installed
Communication control is available only for ports in the same group.
(Up to 256 groups can be registered.)

1.3 Accessories
9
Please be sure to confirm the content.
Please contact our distributor if any of the contents are insufficient.
1.4 Basic operation
This Product does not have a power ON/OFF switch. Connect the supplied power
cord to this Ethernet Switch and connect the other end into an electric outlet.
This Ethernet Switch operates at AC 100 - 240 V (50/60 Hz).
When power is supplied, all the LEDs are turned ON.
Then, PWR LED (Power) lights in green, STATUS/ECO LED (Status/ECO mode) lights
in orange, and self-diagnosis of hardware is executed.
On completion of self-diagnosis, PWR LED (Power) and STATUS/ECO LED
(Status/ECO mode) light in green, and the Ethernet Switch starts operation as a
Ethernet Switch.
When this Ethernet Switch successfully communicates with a terminal connected to a
port, the Port LED lights up.
When the terminal is not operating normally, for example when power is not
supplied to the terminal, the Port LED does not light up.
When the Eco mode is set,Port LED lamps do not light up.
[Optional accessories]
[Power Cord]
The following power cords are supplied as per the intended nation of delivery.
Locale
Thailand 250 VAC 6 A TIS166-2549-
Indonesia 250 VAC 10 A
250 VAC 10 A
250 VAC 5 A
CEE7/7
BS1363
BS1363
-
13 A
5 A
Malaysia
Singapore
Product Number
PN28240i-TH
PN28240i-ID
PN28240i-MY
PN28240i-SG
250 VAC 10 A AS/NZS 3112-Australia
New Zealand
PN28240i-NZ
Power Cord Rating FUSE Rated Current Plug Type
Installation Guide (this document) 1
Rubber foot 4
Wall mount bracket 2
Screw (for fixing the wall mount brackets to the Ethernet Switch) 8
Rack mount bracket (for 19-inch rack) 2
Screw (for 19-inch rack) 4
Screw (for fixing the mount brackets to the Ethernet Switch) 8
Power cord 1
* Just the PN28240i-TH has 1 Installation Guide in Thailand (a total of 2 guides).
Quantity
(*)
PN54022-XX 1000BASE-SX SFP Module (i)
PN54024-XX 1000BASE-LX SFP Module (i)
The XXs are identical to the intended nation of delivery codes.
* For the configuration and management methods, please see the PDF
version of the Operating Instructions on Panasonic’s website.

10
Power port
Connect the supplied power cord to this port and connect the other end into an
electric outlet.
Power cord hook block
If the supplied power cord is hanged to this block, the cord becomes hard to pull
out from the power port.
Ground terminal
Only qualified personnel should install minimum 18AWG green-and-yellow stranded
copper wire to Ground terminal screw.
10/100/1000BASE-T port (ports 1–22)
Devices such as 10/100/1000BASE-T terminal, hub, repeater, bridge, and Ethernet
Switch can be connected to this port. Install the device so that the length of twisted
pair cable (CAT5e or above) becomes 100 m or less.
10/100/1000BASE-T port + SFP extension slot (ports 23, 24)
Install SFP extension module here. (It becomes exclusive usage with twisted pair
port.)
When SFP extension slot is linked, the port is automatically switched to SFP
extension mode.
SFP port supports only the full duplex communication.
Console port
Transmission mode : RS-232C
Transmission speed : 9,600 bps
Stop bit : 1 bit
Flow control : None
Emulation mode : VT100
Data length : 8 bits
Parity control : None
Transmission connector : RJ45
Front panel
Back panel
Enlarged view on the next page
Explanation label
10/100/1000BASE-T port
Console port
LED display change button
SFP extension slot
troprewoP
lebalrebmunlaireSlanimretdnuorG
Power cord hook block
Use our optional RJ45-DSub 9-pin console cable for the console cable.
Part Names and Functions
2
MAC address label