Panasonic ZEQUO 6700RE User manual

 Thank you for purchasing our product.
 This manual provides important information about safe and proper
operations of this Ethernet Switch.
 Please read the "Important Safety Instructions" on pages 3 to 5.
 Any problems or damages resulting from disassembly of this Ethernet Switch
by customers are not covered by the warranty.
I1017-20122
ZEQUO 6700RE
Model No.
Installation Guide
Printed in Japan
PN36243E-TH
PN36243E-MY
PN36243E-ID
PN36243E-SG
PN36243E-NZ
2-12-7, Higashi-Shimbashi, Minato-ku, Tokyo Japan, 105-0021
©
Panasonic Electric Works Networks Co.,Ltd.
Panasonic Electric Works Networks Co.,Ltd. 2022
 The instruction manuals (Web Version and CLI Version), latest
firmware and SDN application (ZEQUO assist Plus) can be
downloaded from the following URL.
https://panasonic.co.jp/ew/pewnw/english/datadownload/index.html

Contents
2
Important Safety Instructions
Basic Instructions for the Use of This Product
1. Product Outline
1.1 Features
1.2 Specifications
1.3 Accessories
1.4 Basic operation
2. Part Names and Functions
3. Installation and Configuration
3.1 Removing, Mounting, and Replacing the Power Modules
3
6
7
7
8
10
11
12
15
15
3.2 Removing, Mounting, and Replacing the Fan Modules 17
3.4 Installing on level shelves 20
3.3 Grounding Cable Connection 19
3.5 Mounting to rack
3.6 Configuration of IP address (Basic)
Troubleshooting
20
21
23

3
This chapter contains important safety instructions for preventing bodily injury
and/or property damage. Please read carefully, and follow them at all times.
Do not use power supply other than AC 100 - 240 V.
Deviation could lead to fire, electric shock, and/or equipment failure.

Do not handle this Ethernet Switch and connection cables during a thunderstorm.
Deviation could lead to electric shock.
Do not disassemble and/or modify this Ethernet Switch.
Deviation could lead to fire, electric shock, and/or equipment failure.
Do not damage the power cord. Do not bend too tightly, stretch, twist, bundle
Do not unplug nor plug in the power plug with wet hands.
Deviation could lead to electrical shock, and/or equipment failure.
Do not insert or drop any foreign objects such as metal or readily combustible
things into Ethernet Switch through the openings.
Deviation could lead to fire, electrical shock, and/or equipment failure.
Do not store or use the Ethernet Switch in places where it might get splashed
with liquids such as water, in places with a lot of humidity, in places with
conductive dust, or in places where there are corrosive and combustible gases.
Deviation could lead to fire, electrical shock, and/or equipment failure.
Do not use the Ethernet Switch in dusty environments such as on floors,
underneath floors, the backside of ceilings, or boards.
Do not use the Ethernet Switch in very dusty areas such as on floors, underneath
floors, the backside of ceilings, or boards. Deviation could lead to fire, electrical shock,
and/or equipment failure. It is recommended that the Ethernet Switch be operated in
environments such as the inside of racks where it is difficult for dust to be generated.
Do not store or use the Ethernet Switch in places where it will be exposed to
direct sunlight or high temperatures.
The temperature inside will rise, which may cause fire.
with other cord, pinch, put under a heavy object and/or heat it.
Damaged power cord could lead to fire, short, and/or electric shock.





This symbol indicates a potential hazard
that could result in serious injury or death.
 Severity of bodily injury and/or property damage, which could result from incorrect
use of the Ethernet Switch, are explained below.

The following symbols are used to classify and describe the type of instructions to be observed.
Important Safety Instructions
WARNING
CAUTION This symbol indicates safety instructions.
Deviation from these instructions could lead
to bodily injury and/or property damage.
This symbol is used to alert
users what they must do.
This symbol is used to alert
users what they must not do.
WARNING
Do not store or use the Ethernet Switch in places where there are lots of
vibrations and impacts, or in unstable areas.
It might fall, which may cause injuries and/or equipment failure.

Do not put the Ethernet Switch into fire.
Deviation could lead to explosion and/or fire.

4
Use the bundled power cord (AC 100 – 240 V specifications).
Deviation could lead to electric shock, malfunction, and/or equipment failure.
Unplug the power cord in case of equipment failure.
Deviation, such as keep connecting for a long time, could lead to fire.
Connect the power cord firmly to the power port.
Deviation could lead to electric fire, shock, and/or malfunction.
If the STATUS LED is blinking in orange (systemtfault) , check for the cause
via the system log, since it might be a malfunction if it is not the temperature,
loop detection and shutoff, unplug the power plug.
Deviation, such as keep connecting for a long time, could lead to fire.







Handle the Ethernet Switch carefully to prevent fingers and hands from being
damaged by twisted pair port, SFP extension slot, Stacking port, console port,
SD card slot, or power cord hook block.
CAUTION
Do not connect any other devices except for 10BASE-T/100BASE-TX/1000BASE-T
devices to the twisted pair ports.
Deviation could lead to equipment failure.
Do not insert any other modules except for our optional SFP module
(PN54021K/PN54023K) and the SFP+ module (PN59021/PN59023) to the SFP+
extension slots.
Do not insert any other modules except for our optional SFP module
(PN54021K/PN54023K), SFP+ module (PN59021/PN59023), or 40G direct-attach
cable (OP 40G-T01/OP 40G-T02) to the stacking ports (Port29-30).
Check out our website for the latest information on supported SFP modules.
Do not insert nor use any other modules except for our optional FAN02 Module
(PN73002) into the fan module slots.
Deviation could lead to electric shock, malfunction, and/or equipment failure.
Do not insert nor use any other modules except for our optional RP02-200W
Module (70002) into the power module slots.
Deviation could lead to electric shock, malfunction, and/or equipment failure.
Be sure to connect the ground cable.
Otherwise this might cause electrical shocks, misoperations and malfunctions.
Connect the Ethernet Switch via the supplied power cord to the outlet which is
connected to the ground.
If the outlet is not connected to a ground, connect the ground cable to the ground
terminal screw.
Be sure to check the precautions which are printed on the product labels
before using.
Deviation could lead to electric shock.






CAUTION
Check whether the optical fiber cable connectors are contaminated with dust, etc.
This might cause the optical signal to not be transmitted normally, and cause
misoperations and malfunctions. If they are contaminated, make sure to clean
them off, then connect them to the optical fiber ports.
This Ethernet Switch is to be periodically serviced in order to maintain its
performance.
Please assign a product administrator, and be sure to implement periodic
maintenance. When doing maintenance, check the inspection chart that is
posted on our website which has the requisite items listed on it.
When using this Ethernet Switch to design systems, use it after applying
appropriate measures such as setting up redundant configurations.
Communication failures might be generated due to causes such as malfunctions or
misoperations while the Ethernet Switch is being used.
When using this Ethernet Switch for applications which require extremely high
reliability, be careful to expend all possible means to ensure safety and
reliability.
This Ethernet Switch is not designed nor manufactured with the intention that it be
used for applications (in use with railways, aviation, and medical care, etc. where
the influence rate due to communication failures is extremely high in regard to
systems that directly affect systems and human lives) which require extremely high
reliability.
It is recommended that this Ethernet Switch be replaced about five years after
it has been installed.
This may vary depending upon conditions such as utilisation rates and usage
environments, but performance might decrease due to the age-related degradation,
etc. of components.
Be careful in regards to environmental restrictions whereby the Ethernet Switch
can be used.
Please isolate the business power lines and communications lines. Isolate distribution
lines and other distribution lines, and low current power lines, optical fiber cables,
metallic water conduits, and gas conduits, etc. Noise may be generated in the
communication lines which might cause communication glitches.
5

Meaning of symbols (Described on Rating label)
CAUTION, RISK OF ELECTRIC SHOCK
DISCONNECT ALL POWERSUPPLY INPUTS
PLUGSBEFORE SERVING


Basic Instructions for the Use of This Product
For inspection and/or repair, consult the shop.
Use commercial power supply from a wall socket, which is close and easily accessible to
this Ethernet Switch.
Unplug the power cord when installing or moving this Ethernet Switch.
Unplug the power cord when cleaning this Ethernet Switch.
Use this Ethernet Switch within the specifications. Deviation could lead to malfunction.
Do not touch the metal terminal of the RJ45 connector, the modular plug of connected
twisted pair cable, or the metal terminal of the SFP extension slot. Do not place charged
objects in the proximity of them. Static electricity could lead to equipment failure.
Do not put the modular plug of the connected twisted pair cable on objects that can
carry static charge, such as carpet. Do not place it in the proximity. Static electricity could
lead to equipment failure.
Do not put a strong shock, including dropping, to this Ethernet Switch. Deviation could
lead to equipment failure.
Before connecting a console cable to the console port, discharge static electricity, for
example by touching metal appliance (do not discharge by touching this Ethernet Switch).
Do not store and/or use this Ethernet Switch in the environment with the characteristics
listed below. (Store and/or use this Ethernet Switch in the environment in accordance with
the specification.)
- High humidity. Possible spilled liquid (water).
- Dusty. Possible static charge (such as carpet).
- Under direct sunlight.
- Possible condensation. High/low temperature exceeding the specifications
environment.
- Strong vibration and/or strong shock.
Please use this Ethernet Switch in place where ambient temperature is from 0 to 45°C.
Failure to meet the above conditions may result in fire, electric shock, breakdown,
When connecting the stacks, be sure to use firmware versions that are identical for all
of the devices.
Please note that operations are not guaranteed if the firmware versions are different.
Select the appropriate cables and lay them.
Communications might be affected by how the cables are laid, and environmental noise.
and/or malfunction. Please beware because such cases are out of guarantee.
Additionally, do not cover the bent hole of this Ethernet Switch.
Deviation could lead to high internal temperature, equipment failure and/or
malfunction.
When stacking Ethernet Switches, leave a minimum of 20 mm space between them.
1. Please note that Panasonic shall not bear any liability whatsoever for any damages
(this shall include, but isnotlimited to,lost earnings,lost opportunities, etc.)
which were generated in relation to damages caused by operations and usage,
or the inability to use this Ethernet Switch, whereby the customer does not follow
this Installation Guide.
2. The contents described in this document may be changed without prior notice.
3. For any question, please contact the retailer where you purchased the product.
6

Product Outline
The ZEQUO 6700RE is a Layer 3 all giga Ethernet Switch equipped with management
functions that has 24 SFP expansion ports, 4 10/100/1000BASE-T ports, 4 SFP+ expansion
ports and 2 40G stack ports.
1.1 Features
1
 Has wire-speed Layer 3 switching function.
 Ports 1 to 24 are SFP extension slots. Since SFP modules are inserted into them,
1 Gbps communications are feasible.
 Ports 21 to 24 (twisted-pair ports) are 10BASE-T/100BASE-TX/1000BASE-T ports which
support autonegotiation.




The ports which generated the loops give notification via LEDs, and the ports which
generated the loops are automatically shut off via the loop detection and blocking functions.
The ports which generated the loops are displayed via LEDs, and the network manager
can identify the ports which generated the loops after the loop resolution via the loop
history functions.
Triple authentication which can simultaneously wait for IEEE802.1X, MAC, and WEB
authentications at a single port is supported, and an authentication network can be
configured which matches the kinds of connection terminals.
Step authenticating is supported, and user authentications and terminal authentications
can be implemented in phases.


A power supply redundancy can be configured via the additional purchases and mounting
of power modules.
The power modules and fan modules are hot-swappable.
They are exclusively used with SFP extension slots.
 Ports 25 to 28 are SFP+ extension slots. They are capable of 10-Gbps
communications. They can be used as SFP or SFP+ ports.
If the stacking functions have been activated, ports 29 and 30 will be stacking ports.
By using the 40G direct attach cables, stacking connections are feasible for up to a
maximum of four units whereas the ZEQUO 6700RE, or the ZEQUO 6600RE are mixed.
 Settings and firmware can be changed and saved by using an SD card.
 All twisted pair ports support straight/cross cable auto sensing function. Simply
connect devices with straight cables, whether it is a terminal or a network device.
(This function does not work if the port communication configuration is set at Fixed
or Link Aggregation.)
 Embedded power saving mode detects the connection status automatically and
saves power consumption to minimum.
The Ring Redundant Protocol (RRP) is supported, allowing to make a redundant net-work-
via ring topology.
7

1.2 Specifications
Interface SFP extension slots 1 - 24
Transmission system: IEEE802.3z 1000BASE-SX/1000BASE-LX
SFF-8472 (DMI: Diagnostic Monitoring Interface)
Twisted-pair ports 21 - 24 RJ-45 connectors
Transmission system: IEEE 802.310BASE-T
IEEE 802.3u100BASE-TX
IEEE 802.3ab 1000BASE-T
SFP+ extension slots 25 - 28
Transmission system: IEEE802.3z 1000BASE-SX/1000BASE-LX
IEEE802.3ae10GBASE-SR/10GBASE-LR
SFF-8472 (DMI: Diagnostic Monitoring Interface)
Ports 29 and 30 are usable as stacking ports
Stack ports: 2 ports (ports 29-30)
Options: 40G direct attach cable 1 m
(Order model number: OP 40G-T01)
40G direct attach cable 2 m
(Order model number: OP 40G-T02)
Fan module slots: 2 slots
Supported fan module model: PN73002 FAN02 Module
Hot-swapping: Supported
Power module slots: 2 slots
Supported power module model: 70002 RP02-200W Module
Hot-swapping: Supported
Hot-inserting: Supported
SD card slot: SD/SDHC, 128MB-32GB
Console port: RJ45 connector
Switching mode Store and Forward method: Forwarding rate
10BASE-T: Max. 14,880 pps/port
100BASE-TX: Max. 148,800 pps/port
1000BASE-T/SX/LX: Max. 1,488,000 pps/port
10GBASE-SR/LR: Max. 14,880,000 pps/port
MAC Address table: Max. 32K entry/unit
tinu/etybM4:reffuB
Switching capability: 288Gbps
Layer 2 Features STP/RSTP/MSTP
Tag VLAN, MAC base VLAN, Subnet base VLAN,
Protocol base VLAN, Dynamic VLAN, Guest VLAN,
Link aggregation (STATIC/LACP), SPAN, RSPAN, Port monitoring,
Multicast (IGMP Snooping, MLD Snooping)
QoS (PQ, WRR), Authentication (IEEE802.1X, Web-based Access
control, MAC-based Access control), Storm control, RRP
Layer 3 Features IPv4/v6 routing, IP forwarding,
Routing table size: IPv4:12K, IPv6:6K
VRRP, OSPFv2/v3, RIPv1/v2
Multicast (IGMPv1/v2/v3, MLDv1/v2, DVMRP (IPv4),
PIM Dense mode (IPv4), PIM Sparse mode (IPv4/v6),
PIM-SSM (IPv4), L2/L3 Access control
IP filtering
8
Product Outline
1

Management DHCP relay agent, DHCP server, Console, TELNET, SSH, WEB
SNMPv1/v2c/v3, ZEQUO assist Plus
Power supply AC 100-240 V, 50/60 Hz, 2.5 A
Power consumption
When either power port 1, or power port 2 is connected
Normally, Max. 51.52 W, Min. 32.52 W
When both power port 1 and power port 2 are connected
Normally, Max. 56.00 W, Min. 35.59 W
Storage environment Temperature: -20–70°C, Humidity: 10–90% RH (no condensation)
Mass (Weight) 4,980 g (One power module is mounted into either power slot 1 or 2)
(default)
5,600 g
(Two power modules are mounted into both power slot 1 and 2)
External dimensions 44 mm (Height) × 440 mm (Width) × 312 mm (Depth) (Excluding
protruding sections)
Operating environment Temperature: 0–45°C,Humidity: 20–80% RH (no condensation)
Fan Installed
9

1.3 Accessories
Installation Guide (this document) 1 (*)

Mounting bracket (for 19-inch rack) 2

Screw (for 19-inch rack) 4

Screw (for fixing the main unit and the mounting bracket) 8

Rubber foot 4
Dummy SD card 1 (unit mounted)
Power cord 1
* Just the PN36243E-TH has 1 Installation Guide in Thai (a total of 2 guides).
[Power Cord]
Please be sure to confirm the content.
The following power cords are supplied as per the intended nation of delivery.
The XXs are identical to the intended nation of delivery codes.
Please contact our distributor if any of the contents are insufficient.
Quantity

Power module blank panel 1 (unit mounted)

Fan module (PN73002 FAN02 Module) 2 (unit mounted)

Power module (70002 RP02-200W Module) 1 (unit mounted)
40G Direct attach cable (OPQSFP-T01)

1
[Optional accessories]
PN54021K-XX 1000BASE-SX SFP Module
PN54023K-XX 1000BASE-LX SFP Module
PN59021-XX 10GBASE-SR SFP+ Module
PN59023-XX 10GBASE-LR SFP+ Module
PN73002 FAN02 Module
70002-XX RP02-200W Module
Locale
Thailand 250 VAC 6 A TIS166-2549-
Indonesia 250 VAC 10 A
250 VAC 10 A
250 VAC 5 A
CEE7/7
BS1363
BS1363
-
13 A
5 A
Malaysia
Singapore
Product Number
PN36243E-TH
PN36243E-ID
PN36243E-MY
PN36243E-SG
250 VAC 10 A AS/NZS 3112-
Australia
New Zealand
PN36243E-NZ
Power Cord Rating FUSE Rated Current Plug Type
10
Product Outline
1