Panasonic KX-PRW130 User manual

Premium Design Phone with Home Phone Connect
Model No. KX-PRW130

*1 See page 2 for replacement battery information.
*2 The handset cover comes attached to the handset.
①②③④
Accessory item Model number
Rechargeable HHR-4DP
A
*1
batteries Battery type:
–Nickel metal hydride (Ni-MH)
–2 x AAA (R03) size for each handset
T-adaptor KX-J66
Range extender KX-TGA405*2
Key detector KX-TGA20*3
*1 Replacement batteries may have a different capacity from that of the supplied batteries.
*2 By installing this unit, you can extend the range of your phone system to include areas
where reception was previously not available. This product can be purchased online. Please
visit our Web site: http://www.panasonic.com/RangeExtender
*3 By registering the key detector (4 max.) to a Panasonic Digital Cordless Phone and
attaching it to an easy-to-lose item in advance, you can locate and find the mislaid item to
which the key detector is attached. Please visit our Web site:
http://panasonic.net/pcc/products/telephone/p/tga20/
LDesign and specifications are subject to change without notice.
LThe illustrations in these instructions may vary slightly from the actual product.
①
No. Quantity
Handset cover*2
Rechargeable batteries*1
Telephone line cord/PQJA10075Z
AC adaptor/PNLV236Z
Accessory item/Part number
1
2
1
1
④
③
②

You can expand your phone system by
registering optional handsets (6 max.) to a
single base unit.
LOptional handsets may be a different color
from that of the supplied handsets.
Your smartphone: 4 max.
You can expand your phone system by installing the Smartphone
Connect app on your smartphone and registering your smartphone
to the base unit.
LYou must configure the base unit and download the app before
you can use these features. See the “Smartphone Integration”
chapter beginning for more information.
Handset (optional): KX-PRWA13

2.

LCommunication standards
DECT 6.0 (Digital Enhanced Cordless
Telecommunications 6.0),
Wi-Fi (IEEE 802.11 b/g/n)
LFrequency range
DECT:
1.92 GHz to 1.93 GHz
Wi-Fi:
2.412 GHz to 2.462 GHz (channels 1 to 11)
LRF transmission power
DECT:
115 mW (max.)
Wi-Fi:
100 mW (peak transmission power)
LEncryption
WPA2-PSK (TKIP/AES), WPA-PSK (TKIP/
AES), WEP (128/64 bit)
LSimplified configuration
WPS (PBC)
LPower source
120 V AC, 60 Hz
LPower consumption
Base unit:
Standby: Approx. 2.0 W
Maximum: Approx. 3.9 W
LOperating conditions
0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 %
relative air humidity (dry)
Note:
LDesign and specifications are subject to
change without notice.
LThe illustrations in these instructions may
vary slightly from the actual product.

■Base unit
■Base unit
①Press the AC adaptor plug firmly to the
unit.
②Keep the plug in the horizontal position
and fasten the cord by hooking it.
③Connect the AC adaptor to the power
outlet.
④Connect the telephone line cord to the unit
and single-line telephone line jack (RJ11C)
until you hear a click.
⑤ADSL/ADSL filter (not supplied) is
required if you have a DSL/ADSL service.
Note:
LUse only the supplied Panasonic AC
adaptor PNLV236.

.
OFF