Panasonic KX-TD1232E User manual

Digital Super Hybrid System
Please read this manual before connecting
the Digital Super Hybrid System.
MODEL
KX-TD816E / KX-TD1232E
D1232
DIGITAL SUPER HYBRID SYSTEM
Panasonic
Panasonic
D816
DIGITAL SUPER HYBRID SYSTEM
KX-TD816 KX-TD1232

Thank you for purchasing the Panasonic Model
KX-TD816E/KX-TD1232E, Digital Super Hybrid System.
2
System Components
Note In this Installation Manual, the suffix “E” of each model number is omitted. The Digital
Super Hybrid System is abbreviated as “DSHS.” The Digital Proprietary Telephone is
abbreviated as “DPT.” Other proprietary telephone (analogue type) is abbreviated as
“APT.” A Single Line Telephone is abbreviated as “SLT.”
Model
KX-TD816E
KX-TD1232E
KX-T7420E
KX-T7425E
KX-T7431E
KX-T7433E
KX-T7436E
KX-T7220E
KX-T7230E
KX-T7235E
KX-T7250E
KX-T7130E
KX-T7020E
KX-T7050E
KX-T7440E
KX-T7441E
KX-T7240E
KX-T7040E
KX-TD170E
KX-TD180E
KX-TD181E*1
KX-TD182E*2
KX-TD190E
KX-TD192E*1
KX-TD196E*1
KX-TD197E
KX-TD198E*2
KX-TD199E*2
KX-TD280E
KX-TD281E*1
KX-TD282E*2
KX-TD286E
KX-TD290E
KX-TD142
KX-TD144
KX-TD146
KX-T30865E
KX-A46E
Service Unit
Telephone
Optional
Equipment
Description
Digital Super Hybrid System (Main Unit)
Digital Super Hybrid System (Main Unit)
Digital proprietary telephone
Digital proprietary telephone
Digital proprietary telephone with 1-line display
Digital proprietary telephone with 3-line display
Digital proprietary telephone with 6-line display
Digital proprietary telephone
Digital proprietary telephone with 2-line display
Digital proprietary telephone with 6-line display
Digital proprietary telephone
Proprietary telephone with 1-line display
Proprietary telephone
Proprietary telephone
Digital DSS Console
Digital Attendant Console
Digital DSS Console
DSS Console
8-Station Line Unit
4-CO Line Unit
8-CO Line Card
4-CO Line Card
Message Unit
System Inter Connection Card (two cards with Connection Cable)
Remote Card
9600bps Speed Remote Card
9600bps Speed Remote Unit
Message Card
2-ISDN S0 Line Unit
4-ISDN S0 Line Card
2-ISDN S0 Line Card
6-ISDN S0 Line Unit
Primary Rate Interface (PRI) ISDN Expansion Unit
Cell Station
Cell Station
Interface Unit
Doorphone
Battery Adaptor
System Components Table
*1: Available for KX-TD1232 only.
*2: Available for KX-TD816 only.

3
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This appliance is supplied with a moulded three pin mains plug for your safety and convenience.
A 5 amp fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5
amps and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark or the BSI mark on the body of the fuse.
If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is
replaced.
If you lose the fuse cover the plug must not be used until a replacement cover is obtained.
A replacement fuse cover can be purchased from your local Panasonic Dealer.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN
YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF
AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS
INSERTED INTO ANY 13 AMP SOCKET.
If a new plug is to be fitted please observe the wiring code as shown below.
If in any doubt please consult a qualified electrician.
WARNING : THIS APPLIANCE MUST BE EARTHED.
IMPORTANT : The wires in this mains leads are coloured in accordance with the following
code: Green-and-yellow: Earth
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this appliance may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows.
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the
plug which is marked with the letter E or by the safety earth symbol or coloured GREEN or
GREEN-AND-YELLOW.
The wire which is coloured BLUE must be connected to the terminal in the plug which is marked
with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal in the plug which is
marked with the letter L or coloured RED.
How to replace the fuse : Open the-fuse compartment with a screwdriver and replace the fuse
and fuse cover.
Important Information

4
Important Information
This equipment should be used on PSTN lines requiring 2-wire Loop calling unguarded clearing
with Loop Disconnect or DTMF address signalling.
The equipment must be connected to direct extension lines and a payphone should not be
connected as an extension.
Operation in Power Failure
In the event of a power failure, three single line telephones connected to Power Failure Transfer
jacks will be directly connected to the following CO lines:
KX-TD816 — CO 1, CO 2, and CO 5
KX-TD1232 — CO 1, CO 2, and CO 9
• Set the Dialling Mode (Tone or Pulse) of your telephone, according to the CO line.
• 999 and 112 can be dialled on the apparatus for the purpose of making outgoing calls to the BT
emergency (999) and (112) service.
Satisfactory performance can not be guaranteed for every allowed combination of host and
subsidiary apparatus.
999 and 112 can be dialled on the apparatus after accessing the CO line for the purpose of
making outgoing calls to the BT emergency (999) and (112) service.
During dialling, this apparatus may tinkle the bells of other telephones using the same line. This
is not a fault and we advise you not to call Fault Repair Service.
‘Prevention of access by user. This apparatus is intended to be accessible only to authorized
personnel. This apparatus must be installed in a locked room or similar environment, such that
user access is prevented. Failure to prevent such user access will invalidate any approval given
to this apparatus.’
Caution:
Do not push the PAUSE button more than twice following the initial access digit (or digits).
Failure to comply with this requirement may result in unsatisfactory operation.
Notice:
This PBX should only be used on B•T lines on which specific BT services or facilities are
provided.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according
to the manufacturer's instructions.

• The apparatus is designed to be installed and operated under controlled conditions
of ambient temperature and a relative humidity not greater than 60%.
• Avoid installing the apparatus in damp or humid environments, such as bathrooms
or swimming pools.
• The apparatus shall not be exposed to dripping or splashing.
• Keep the unit away from heating appliances and electrical noise generating devices
such as fluorescent lamps, motors and televisions. These noise sources can
interfere with the performance of the Digital Super Hybrid System.
• This unit should be kept free of dust, moisture, high temperature (more than 40˚C /
104˚F) and vibration, and should not be exposed to direct sunlight.
• Never attempt to insert wires, pins, etc. into the vents or other holes of this unit.
• If there is any trouble, disconnect the unit from the telephone line. Plug a single
line telephone directly into the telephone line. If the telephone operates properly,
do not reconnect your system to the line until the system has been repaired. If the
telephone does not operate properly, chances are that the problem is in the
telephone network, and not in your system.
• Do not use benzine, thinner, or the like, or any abrasive powder to clean the
cabinet. Wipe it with a soft cloth.
• The ISDN Line Units/Cards are in accordance with the European
Telecommunication Standards (ETS). If your telephone company provides an ISDN
service which follows standards other than ETS, some ISDN features may not work
properly. (E.g. Charge Fee Reference, CLIP, COLP, etc.)
5
Attention
THIS UNIT MAY ONLY BE INSTALLED AND SERVED BY QUALIFIED
SERVICE PERSONNEL.
WHEN A FAILURE OCCURS WHICH RESULTS IN THE INTERNAL PARTS
BECOMING ACCESSIBLE, DISCONNECT THE POWER SUPPLY CORD
IMMEDIATELY AND RETURN THIS UNIT TO YOUR DEALER.
DISCONNECT THE TELECOM CONNECTION BEFORE DISCONNECTING
THE POWER CONNECTION PRIOR TO RELOCATING THE EQUIPMENT,
AND RECONNECT THE POWER FIRST.
THIS UNIT IS EQUIPPED WITH AN EARTHING CONTACT PLUG. FOR
SAFETY REASONS THIS PLUG MUST ONLY BE CONNECTED TO AN
EARTHING CONTACT SOCKET WHICH HAS BEEN INSTALLED
ACCORDING TO REGULATIONS.
THE POWER SOCKET WALL OUTLET SHOULD BE LOCATED NEAR
THIS EQUIPMENT AND BE EASILY ACCESSIBLE.
TO PREVENT RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS PRODUCT TO RAIN OR MOISTURE.
WARNING

Warning
This is a Class A product. In a domestic environment
this product may cause radio interference in which case
the user may be required to take adequate measures.
73/23/EEC
89/336/EEC
92/31/EEC
93/68/EEC
6
The serial number of this product may be found on the label affixed to the bottom
of the unit. You should note the serial number of this unit in the space provided
and retain this book as a permanent record of your purchase to aid in identification
in the event of theft.
MODEL NO.:
SERIAL NO.:
DATE OF PURCHASE
NAME OF DEALER
DEALER’S ADDRESS
For your future reference
Attention
APPROVED for connection to
telecommunication systems
specified in the instructions for
use subject to the conditions set
out in them.
606055
APPROVED for connection to
telecommunication systems
specified in the instructions for
use subject to the conditions set
out in them.
NS / 1010 / 235 / R / 604365
KX-TD1232KX-TD816

Introduction
7
This Installation Manual provides technical information for the Panasonic Digital
Super Hybrid System, KX-TD816/KX-TD1232. It is designed to serve as an overall
technical reference for the system and includes a description of the system, its
hardware and software, features and services and environmental requirements.
This manual contains the following sections:
Section 1, System Outline.
Provides general information on the system including system capacity and
specifications.
Section 2, Installation.
Contains the basic system installation and wiring instructions, as well as how to
install the optional cards and units.
Section 3, Features.
Describes all the basic, optional and programmable features in alphabetical order. It
also provides information about the programming required, conditions, connection
references, related features and operation for every feature.
Section 4, System Programming.
Provides step-by-step programming instructions for a proprietary telephone.
Section 5, List.
Lists tone/ring tone and default values of system programming.
Section 6, Troubleshooting.
Provides information for system and telephone troubleshooting.
Section 7, PRI Section.
Provides information on using the Primary Rate Interface (PRI) ISDN line with the
optional expansion unit.
Section 8, DECT Portable Station Section.
Provides information on the wireless system, which can be optionally equipped with
the basic system.
NOTE
The following documents may be used in conjunction with this manual:
• User Manual for KX-TD816/KX-TD1232 System, DIGITAL Proprietary Telephones,
Console, DECT Portable Station and Single Line Telephones
• Programming Table
The programming table is designed to be used as a hard copy reference to the user-
programmed data.

Installation Manual Contents
8*1: Available for KX-TD1232 only.
*2: Available for KX-TD816 only.
Section 1 System Outline
1.1 System Highlights............................................................................. 1-2
1.2 Basic System Construction .............................................................. 1-4
1.3 Proprietary Telephones.................................................................... 1-5
1.4 Options............................................................................................... 1-6
1.5 Specifications..................................................................................... 1-11
1.5.1 General Description................................................................. 1-11
1.5.2 Characteristics......................................................................... 1-12
1.5.3 System Capacity...................................................................... 1-13
1.5.4 Ports......................................................................................... 1-15
Section 2 Installation
2.1 Before Installation ............................................................................ 2-2
2.2 Installation of the Main Unit ........................................................... 2-4
2.2.1 Unpacking ............................................................................... 2-4
2.2.2 Name and Location ................................................................. 2-4
2.2.3 Wall Mounting......................................................................... 2-6
2.2.4 Frame Earth Connection.......................................................... 2-7
2.2.5 Opening Front Cover............................................................... 2-7
2.3 Connection......................................................................................... 2-8
2.3.1 System Connection Diagram................................................... 2-8
2.3.2 Extension Connection
for Proprietary Telephones, Single Line Telephones and Consoles.......... 2-10
2.3.3 Parallelled Telephone Connection
for a Proprietary Telephone and a Single Line Telephone ........................ 2-15
2.3.4 EXtra Device Port (XDP) Connection
for a Digital Proprietary Telephone and a Single Line Telephone ............ 2-17
2.3.5 External Pager Connection...................................................... 2-18
2.3.6 External Music Source Connection......................................... 2-20
2.3.7 Printer Connection .................................................................. 2-22
2.4 Optional Cards and Units Installation ........................................... 2-25
2.4.1 Location of Optional Cards and Units..................................... 2-25
2.4.2 CO Line Connection (Optional Card)..................................... 2-28
2.4.3 Lightning Protector Installation .............................................. 2-33
2.4.4 CO Line Connection (Optional Unit)...................................... 2-36
2.4.5 Extension Connection (Optional Unit).................................... 2-36
2.4.6 Installing Expansion Unit........................................................ 2-37
2.4.7 Internal ISDN S0 Line Connection......................................... 2-42
2.4.8 Remote Card Installation*1...................................................... 2-45
2.4.9
9600bps Speed Remote Unit*2/ Message Unit Installation ...... 2-46
2.4.10
9600bps Speed Remote Card / Message Card*2Installation .... 2-48

Installation Manual Contents
9
2.4.11 Doorphone and Door Opener Connection............................... 2-50
2.4.12 System Connection*................................................................ 2-51.4
2.4.13 Battery Adaptor Connection.................................................... 2-51.6
2.5 Auxiliary Connection for Power Failure Transfer........................ 2-52
2.6 Starting the System for the First Time........................................... 2-54
2.7 System Restart .................................................................................. 2-56
2.8 System Data Clear............................................................................ 2-57
Section 3 Features
AAbsent Message Capability................................................................ 3-2
Account Code Entry ........................................................................... 3-3
Alert Indication................................................................................... 3-4
Alternate Calling – Ring / Voice......................................................... 3-5
Answering, Direct CO Line................................................................ 3-6
Automatic Adjust Time ...................................................................... 3-6
Automatic Callback Busy (Camp-On) ............................................... 3-7
Automatic Configuration.................................................................... 3-8
Automatic Overflow and Hurry-Up Transfer..................................... 3-8
Automatic Redial → Redial, Automatic............................................. 3-144
Automatic Station Release.................................................................. 3-9
BBackground Music (BGM)................................................................. 3-10
Background Music (BGM) – External ............................................... 3-10
Budget Management........................................................................... 3-11
Busy Lamp Field ................................................................................ 3-12
Busy Station Signalling (BSS) ........................................................... 3-12
Button, Direct Station Selection (DSS).............................................. 3-13
Button, Flexible.................................................................................. 3-14
Button, Group-CO (G-CO)................................................................. 3-16
Button, Loop-CO (L-CO)................................................................... 3-17
Button, Single-CO (S-CO) ................................................................. 3-18
Buttons on Proprietary Telephones..................................................... 3-19
CCaller ID............................................................................................. 3-22
CALL FORWARDING FEATURES – SUMMARY......................... 3-23
Call Forwarding – All Calls................................................................ 3-24
Call Forwarding – Busy...................................................................... 3-24
Call Forwarding – Busy / No Answer................................................ 3-25
Call Forwarding – Follow Me............................................................ 3-25
Call Forwarding – No Answer............................................................ 3-26
Call Forwarding – to CO Line............................................................ 3-27
Call Forwarding – by ISDN Line....................................................... 3-28
Call Forwarding – from Hunting Group............................................. 3-28
*: Available for KX-TD1232 only.

Installation Manual Contents
10
Call Hold – CO Line........................................................................... 3-29
Call Hold – Intercom.......................................................................... 3-30
Call Hold, Exclusive – CO Line......................................................... 3-30
Call Hold, Exclusive – Intercom ........................................................ 3-31
Call Hold Retrieve – CO Line............................................................ 3-32
Call Hold Retrieve – Intercom............................................................ 3-32
Calling / Connected Line Identification Presentation
(CLIP / COLP).......................................................................... 3-33
Calling / Connected Line Identification Restriction (CLIR / COLR) .. 3-34
Calling Party Control (CPC) Signal Detection................................... 3-35
Call Log, Incoming............................................................................. 3-36
Call Park............................................................................................. 3-37
Call Pickup, CO Line ......................................................................... 3-38
Call Pickup, Directed.......................................................................... 3-38
Call Pickup, Group............................................................................. 3-39
Call Pickup Deny................................................................................ 3-39
Call Splitting....................................................................................... 3-40
CALL TRANSFER FEATURES – SUMMARY............................... 3-40
Call Transfer, Screened – to CO Line................................................. 3-41
Call Transfer, Screened – to Extension .............................................. 3-41
Call Transfer, Unscreened – to Extension .......................................... 3-42
Call Waiting........................................................................................ 3-43
Charge Fee Reference......................................................................... 3-44
Class of Service (COS)....................................................................... 3-45
CO Incoming Call Information Display............................................. 3-46
CO Line Connection Assignment....................................................... 3-48
CO Line Connection Assignment – Outgoing.................................... 3-48
CO Line Group................................................................................... 3-49
Completion of Calls to Busy Subscriber (CCBS) .............................. 3-50
Conference.......................................................................................... 3-51
Confirmation Tone.............................................................................. 3-52
Console............................................................................................... 3-54
Consultation Hold............................................................................... 3-56
DData Line Security.............................................................................. 3-57
Delayed Ringing → Ringing, Delayed............................................... 3-147
Dial Tone, Distinctive......................................................................... 3-57
Dial Type Selection ............................................................................ 3-58
Direct Dialling In (DDI)..................................................................... 3-60
Direct In Lines (DIL).......................................................................... 3-61
Direct Station Selection (DSS) Button
→ Button, Direct Station Selection (DSS)................................ 3-13