Panasonic KX-TG7322AL User manual

PNQW1110ZA DC0508DC0
Connections
Important:
LIf you use a telephone line cord which is not supplied, the unit may not work
properly.
(220-240 V AC, 50/60 Hz)
To socket
DSL/ADSL filter
(For DSL/ADSL
service users)
Base unit
Hook
Guide
Plug
“Click”
Use only the supplied Panasonic
AC adaptor PQLV207AL.
Use only the supplied
telephone line cord.
Press plug firmly.
Plug
Guide
Do not try to connect over the guide.
(KX-TG7322)
Charger
Use only the supplied Panasonic
AC adaptor PQLV209AL.
Press plug firmly.
(220-240 V AC, 50/60 Hz)
Hooks
Model No. KX-TG7301AL/KX-TG7321AL
KX-TG7322AL
Quick Guide
TG7301_7321AL(e)_QG.fm Page 1 Monday, May 26, 2008 11:09 AM

– 2 –
Battery installation/Battery charge
Charge for about 7 hours.
Note:
LUSE ONLY Ni-MH batteries AAA (R03) size.
LDo NOT use Alkaline/Manganese/Ni-Cd batteries.
Operating tips
Using the navigator key
The handset navigator key can be used to
navigate through menus and to select items
shown on the display by pressing {^}, {V},
{<}, or {>}.
To adjust the receiver or speaker volume,
press {^} to increase the volume, or press {V}
to decrease the volume repeatedly while
talking.
Soft keys
The handset features 3 soft keys. By pressing
a soft key, you can select the feature shown
directly above it on the display.
Base unit *1 Charger *2
*1 Model shown is KX-TG7301.
*2 KX-TG7322
Rechargeable
Ni-MH ONLY
“Charging”will
be displayed.
{V}
{^}
Volume up
Volume down
{<}{>}
TG7301_7321AL(e)_QG.fm Page 2 Monday, May 26, 2008 11:09 AM

– 3 –
Date and time (Handset)
1K(middle soft key)
2{V}/{^}: “Handset Setup”iM
3{V}/{^}: “Time Settings”iM
4{V}/{^}: “Set Date & Time”iM
5Enter the current date, month, and year.
6Enter the current hour and minute.
7Mi{ih}
Basic operations
Making/Answering calls (Handset)
Making calls Dial the phone number. i{C}/{s}
Answering calls {C}/{s}
To hang up {ih}
To adjust the receiver/
speaker volume
Press {^} or {V} repeatedly while talking.
Making a call using the redial
list
j(right soft key) i{V}/{^}: Select the desired
phone number. i{C}
Handset ringer volume 1K(middle soft key)
2{V}/{^}: “Handset Setup”iM
3{V}/{^}: “Ringer Setup”iM
4{V}/{^}: “Ringer Volume”iM
5{V}/{^}: Select the desired volume. iMi
{ih}
Phonebook (Handset)
Adding entries 1n(left soft key) iK
2{V}/{^}: “New Entry”iM
3Enter the party’s name (16 characters max.). i
M
4Enter the party’s phone number (24 digits max.).
iM2 times i{ih}
LTo enter a name, see the character table in the
operating instructions.
Making calls 1n(left soft key)
2{V}/{^}: Select the desired entry.
LYou can scroll through the phonebook entry by
pressing and holding {V} or {^}.
3{C}
TG7301_7321AL(e)_QG.fm Page 3 Monday, May 26, 2008 11:09 AM

– 4 –
Answering system (Base unit): KX-TG7321/KX-TG7322
Answering on/off Press {s}to turn on/off the answering system.
Listening to messages {6}
Frequently asked questions
Question Cause & solution
Telephone
What should I do when noise
is heard, sound cuts in and
out?
LYou are using the handset or base unit in an area
with high electrical interference. Place the base
unit and use the handset away from sources of
interference.
LMove closer to the base unit.
LIf you use a DSL/ADSL service, we recommend
connecting a filter (contact your DSL/ADSL
service provider) to the telephone line between
the base unit and the telephone line socket.
Contact your DSL/ADSL provider for details.
What do I need to do to
erase y(Missed call) from
the display?
LThere are unviewed missed calls remaining. View
them using the following method.
1K(middle soft key)
2{V}/{^}: “Caller List”iM
3Press {V} to search from the most recent call,
or press {^} to search from the oldest call.
Call waiting (using the recall/flash button)
Where can I find the recall/
flash button?
How do I answer the 2nd call
when I am talking with
someone?
How can I use the call
waiting service?
LThe recall/flash button is shown as {R/E}on the
handset. Press {R/E}during a call.
LPress {R/E}key, and then {2}key while on the
1st call, this will switch to the 2nd call, press
{R/E}key and then {2}again to alternate
between calls or return to 1st call, or press {R/E}
key and then {1}key to terminate the current call.
LCall waiting is a service provided by your service
provider/telephone company. For additional
information on the use of this service contact your
service provider/telephone company.
Basic operations
TG7301_7321AL(e)_QG.fm Page 4 Monday, May 26, 2008 11:09 AM

– 5 –
How can I make a
conference call?
To make an internal conference call:
LPress {INT}and the extension number of the
other person that you desire to join the outside
call. When the paged party answers, press {3}
key to activate the conference call (KX-TG7321
and KX-TG7322).
To make an external conference call:
LIf you subscribe to external conference call
service provided by your service provider/
telephone company, please contact your service
provider/telephone company for full instructions
on this feature. An example of this feature is as
follows: While on an external call, press {R/E}
key, then dial the phone number of the other
person that you desire to join the outside call.
When the 2nd called party answers, press {R/E}
key then {3}key to activate the conference call.
Why call waiting does not
work when I press {R/E}?
LYou may be required to change the recall/flash
time to “90 msec.”. (Default: “100 msec.”)
LMake sure you have subscribed to the call waiting
service. Contact your service provider/telephone
company.
Frequently asked questions
Question Cause & solution
TG7301_7321AL(e)_QG.fm Page 5 Monday, May 26, 2008 11:09 AM

– 6 –
Frequently asked questions
Question Cause & solution
Battery charge
How do I charge the battery? LMake sure that the battery is properly installed in
the handset and the cover is closed. Place the
handset on the base unit or charger. When
charging, “Charging”is displayed.
LIt takes about 7 hours to charge the empty battery.
When the batteries are fully charged, “Charge
Completed”is displayed.
Can I leave the handset on
the base unit or charger after
battery is fully charged or
each call is finished?
LYou can place the handset on the base unit or
charger anytime. Battery is not overcharged and
there is no damage to the battery. By placing the
handset on the base unit or charger, it is always
fully charged.
What should I do when the
operating time seems to be
shorter even after I fully
charged the batteries?
LClean the battery ends (S, T) and the charge
contacts with a dry cloth, and charge again.
Where can I buy new
battery?
LBattery can be purchased through your local
retailer.
Range/Distance (No link to base)
What is the range/distance of
my cordless phone? (Why
am I getting short or poor
range/distance on my
cordless phone?)
Why is wflashing?
LRange/distance is related to technology and
enviromental factors. Therefore we cannot
provide a given range or distance.
LMake sure that the AC adaptor is properly
connected to wall socket and to the base unit and
make sure that beep tones on the handset sound
when you press {x} on the base unit.
LMove closer to the base unit (Allow up to
90 seconds for the handset to reassign to the
base unit.).
LIf you try manual registration process, allow up to
90 seconds for the handset to reassign to the
base unit.
LIf the above remedies do not solve the problem,
refer to the troubleshooting section in your
Operating Instructions for more information.
TG7301_7321AL(e)_QG.fm Page 6 Monday, May 26, 2008 11:09 AM

– 7 –
DSL/ADSL Issues (Noise on line)
Why am I getting noise on
my telephone line?
LIf you subscribe to DSL/ADSL service, we
recommend you to attach a DSL/ADSL filter to the
telephone line between the base unit and the
telephone line socket. Contact your DSL/ADSL
service provider or purchase a DSL/ADSL filter
from a retailer or store. Refer to troubleshooting
section for further details.
LIf you do not subscribe to DSL/ADSL service,
there may be an enviromental issue that is
causing the interference (noise). Move closer to
the base unit and check whether there is noise. If
there is no noise, some enviromental interference
has caused the noise.
LIf there is noise intermittently, there is a possibility
of enviromental interference. Refer to the
troubleshooting.
Caller ID
What should I do to display
caller information?
LYou must subscribe to a Caller ID service. Contact
your service provider/telephone company for
details.
Registration (Adding new handset)
How can I register a handset
to the base unit?
LMake sure that you follow registration procedure
in “Registering a handset to the base unit” on
page 8:
– you are using the supplied handset that came
with the kit (KX-TG7301, KX-TG7321 and
KX-TG7322).
– the AC adaptor is connected to the base unit.
– the handset is charged and not placed on the
base unit.
– note the location of {x} (Locator) button on the
base unit as this is used to start registration
process and is required to be pressed and held
for about 5 seconds until the registration tone is
heard (KX-TG7321 and KX-TG7322).
Which handsets can I buy to
use with this model?
LThe optional handset is KX-TGA731AZ.
Frequently asked questions
Question Cause & solution
TG7301_7321AL(e)_QG.fm Page 7 Monday, May 26, 2008 11:09 AM

– 8 –
Registering a handset to the base unit
The supplied handset and base unit are pre-registered. If for some reason the
handset is not registered to the base unit, register the handset.
1K(middle soft key)
2{V}/{^}: “Handset Setup”iM
3{V}/{^}: “Register H.set”iM
Proceed with the operation for your model.
NKX-TG7301
Press and hold {x} for about 5 seconds. (No
registration tone)
NKX-TG7321/KX-TG7322
Press and hold {x} for about 5 seconds, until
the registration tone sounds.
LThe next step should be completed within 90
seconds.
Wait until “Enter Base PIN”is displayed. i
Enter the base unit PIN (default: “0000”). i
M
LWhen the handset has been registered
successfully, wstops flashing.
Handset
M
Base unit
{x}
{x}
Handset
M
TG7301_7321AL(e)_QG.fm Page 8 Monday, May 26, 2008 11:09 AM

– 9 –
Notes
TG7301_7321AL(e)_QG.fm Page 9 Monday, May 26, 2008 11:09 AM

IMPORTANT!
If your product is not
working properly. . .
1Read the Operating Instructions or
this Quick Guide.
2Visit our website:
http://www.panasonic.com.au
3Contact us via the web at:
http://www.panasonic.com.au/
support/
4Contact our customer support centre on:
Tel.: 132600
Replacement batteries can be purchased
from your retailer.
TG7301_7321AL(e)_QG.fm Page 10 Monday, May 26, 2008 11:09 AM