Panasonic KX-TD1232G User manual

Digital Super Hybrid System
MODEL KX-TD1232G
Installation Manual
Please read this manual before connecting the KX-TD1232G.

Description
Digital Super Hybrid System (Main Unit)
Digital Super Hybrid System (Main Unit)
Digital proprietary telephone with display
Digital proprietary telephone with large display
Digital proprietary telephone with monitor
Digital DSS Console
8-Station Line Unit
2-ISDN S0 Line Unit
4-ISDN S0 Line Card
2-ISDN S0 Line Card
System Inter Connection Cards (2 Cards and 1 Cable)
2400bps Remote Card
Thank you for purchasing the Panasonic Model
KX-TD816SL/KX-TD1232SL, Digital Super Hybrid System.
System Components
Model
KX-TD816SL
KX-TD1232SL
KX-T7230SL
KX-T7235SL
KX-T7250SL
KX-T7240SL
KX-TD170SL
KX-TD280SL
KX-TD281G*1
KX-TD282G*2
KX-TD192G*1
KX-TD196G*1
Service Unit
Proprietary
Telephone
(PT)
Optional
Equipment
System Components Table
• In this Installation Manual, the suffix “SL” or “G” of each model number is
omitted.
• The Proprietary Telephone is abbreviated as “PT.”
The models marked *1 can be installed in KX-TD1232 only.
The models marked *2 can be installed in KX-TD816 only.
2

• Keep the unit away from heating appliances and electrical noise generating devices
such as fluorescent lamps, motors and television. These noise sources can interfere
with the performance of the Digital Super Hybrid System.
• This unit should be kept free of dust, moisture, high temperature (more than 40˚C /
104˚F) and vibration, and should not be exposed to direct sunlight.
• Never attempt to insert wires, pins, etc. into the vents or other holes of this unit.
• If there is any trouble, disconnect the unit from the telephone line. Plug the telephone
directly into the telephone line. If the telephone operates properly, do not reconnect
the unit to the line until the trouble has been repaired. If the telephone does not operate
properly, chances are that the trouble is in the telephone system, and not in the unit.
• Do not use benzine, thinner, or the like, or any abrasive powder to clean the cabinet.
Wipe it with a soft cloth.
• This unit may only be installed and serviced by Qualified Service Personnel.
Attention
WARNING
• THIS UNIT IS EQUIPPED WITH AN EARTHING CONTACT PLUG. FOR SAFETY
REASONS THIS PLUG MUST ONLY BE CONNECTED TO AN EARTHING
CONTACT SOCKET WHICH HAS BEEN INSTALLED ACCORDING TO
REGULATIONS.
•THE POWER SOCKET WALL OUTLET SHOULD BE LOCATED NEAR THIS
EQUIPMENT AND BE EASILY ACCESSIBLE.
• TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR ANY TYPE OF MOISTURE.
The serial number of this product may be found on the label affixed to the bottom
of the unit. You should note the serial number of this unit in the space provided
and retain this book as a permanent record of your purchase to aid in identification
in the event of theft.
MODEL NO.:
SERIAL NO.:
3
For your future reference
DATA OF PURCHASE
NAME OF DEALER
DEALER’S ADDRESS

Introduction
This Installation Manual provides technical information for the Panasonic Digital
Super Hybrid System, KX-TD816/KX-TD1232. It is designed to serve as an overall
technical reference for the system and includes a description of the system, its
hardware and software, features and services and environmental requirements.
This manual contains the following sections:
Section 1, System Outline.
Provides general information on the system including system capacity and
specifications.
Section 2, Installation.
Contains the basic system installation and wiring instructions, as well as how to
install the optional cards and units.
Section 3, Features.
Describes all the basic, optional and programmable features in alphabetical order. It
also provides information about the programming required, conditions, connection
references, related features and operation for every feature.
Section 4, System Programming.
Provides step-by-step programming instructions for a proprietary telephone.
Section 5, List.
Lists tone/ring tone and default values of system programming.
Section 6, Troubleshooting
Provides information for system and telephone troubleshooting.
NOTE
The following document may be used in conjunction with this manual:
• User Manual for KX-TD816/KX-TD1232 System, Proprietary Telephones, DSS
Console and Single Line Telephones
4

*1: Available for KX-TD1232 only. 5
*2: Available for KX-TD816 only.
Contents
Section 1, System Outline
1.1 System Highlights ............................................................................. 1-2
1.2 Basic System Construction............................................................... 1-4
1.3 Proprietary Telephones / Proprietary Single Line Telephone ...... 1-5
1.4 Options............................................................................................... 1-6
1.4.1 Station Line Unit (KX-TD170)............................................... 1-6
1.4.2 CO Line / ISDN S0 Line Card (KX-TD181 / KX-TD182)*1.. 1-6
1.4.3 CO Line / ISDN S0 Line Card (KX-TD281/KX-TD282)*2.... 1-6
1.4.4 CO Line / ISDN S0 Line Unit
(KX-TD180, KX-TD280, KX-TD283)................................... 1-6
1.4.5 System Inter Connection Cards (KX-TD192)*1...................... 1-7
1.4.6 Remote Card (KX-TD196)*1................................................... 1-7
1.4.7 DSS Console (KX-T7240 / KX-T7040).................................. 1-8
1.5 Specifications..................................................................................... 1-9
1.5.1 General Description................................................................. 1-9
1.5.2 Characteristics......................................................................... 1-10
1.5.3 System Capacity...................................................................... 1-11
Section 2, Installation
2.1 Before Installation............................................................................. 2-2
2.2 Installation of the Main Unit............................................................ 2-4
2.2.1 Unpacking ............................................................................... 2-4
2.2.2 Name and Location ................................................................. 2-4
2.2.3 Wall Mounting......................................................................... 2-6
2.2.4 Frame Ground Connection...................................................... 2-7
2.2.5 Opening Front Cover............................................................... 2-8
2.3 Connection......................................................................................... 2-9
2.3.1 System Connection Diagram................................................... 2-9
2.3.2 Extension Connection
for Proprietary Telephones, Single Line Telephones and DSS Consoles.. 2-11
2.3.3 Optional Extension Connection of Clip Terminal*1................. 2-16
2.3.4 Paralleled Telephone Connection
for Proprietary Telephone and a Single Line Telephone ............................ 2-18
2.3.5 EXtra Device Port (XDP) Connection
for a Digital Proprietary Telephone and a Single Line Telephone ............. 2-20
2.3.6 Polarity Sensitive Telephone Connection ............................... 2-21
2.3.7 Doorphone and Door Opener Connection............................... 2-22
2.3.8 External Relay, External Ringer and
External Sensor Connection.................................................... 2-24
2.3.9 External Pager (Paging Equipment) Connection .................... 2-26
2.3.10 External Music Source Connection......................................... 2-27
2.3.11 Printer Connection .................................................................. 2-28