Panasonic KX-TG5621 User manual

PQQW15092YA DC1105SY1125
Setting up
For further information, visit http://www.panasonic.com/phonehelp
Base unit CHARGE 7 HOURS
Handset
Noise filter (For DSL Service users)
Hook
(120 V AC, 60 Hz)
To single-line
telephone jack
(RJ11C)
“Click”
B
A
Charger
Press plug
firmly.
“Click”
(120 V AC, 60 Hz)
Charging
5
Use only the included Panasonic AC adaptor
PQLV1 or PQLV256.
Confirm
“Charging” is
displayed.
KX-TG5622/KX-TG5623
OR
Confirm CHARGE
indicator is on.
Model No. KX-TG5621
KX-TG5622
KX-TG5623
Quick Guide
TG562x_QG(e).fm Page 1 Tuesday, December 13, 2005 2:57 PM
All manuals and user guides at all-guides.com
all-guides.com

–2 –
Operating tips
{ }: shows button names.
Using the navigator key
After pressing {MENU}or {Phonebook}, the
handset navigator key can be used. Press {^}, {V},
{<}, or {>}to navigate through menus and to select
items shown on the display.
Adjusting audio volume
Press {^} or {V} repeatedly while talking.
Handset soft keys
The handset features 2 soft keys. By pressing a soft
key, you can select the feature shown directly above
it on the display.
{ Select}, { Save}, { OK}and additional other
functions are assigned to soft keys. Pay attention to
soft keys to find functions you need during handset
operation.
Adding items to the phonebook (Handset)
1{Phonebook}i{Add}
2Enter the name (max. 16 characters). i{Next}
3Enter the phone number (max. 32 digits). i{Next}i { Save}i{OFF}
For further information, visit http://www.panasonic.com/phonehelp or refer to
Operating Instructions.
{V}
{^}
{<}{>}
Rcvd Phone
K calls book L
5
TG562x_QG(e).fm Page 2 Tuesday, December 13, 2005 2:57 PM
All manuals and user guides at all-guides.com

–3 –
Basic operation (Handset)
Feature Operation
Adjusting the receiver/
speaker volume
Press {^} or {V} repeatedly while talking.
Viewing the caller list and
calling back
Press {^} or {V} repeatedly to select the desired item. i
{C}
Ringer volume 1{MENU}i{1}{1}
2Select the desired volume. i { Save}
Answering call-waiting
call (2nd call)
Press {CALL WAIT}when you hear call waiting tone.
Voice Mail service
Voice Mail is an automatic answering service offered by your telephone service provider.
After you subscribe to this service, the telephone service provider’s Voice Mail system will
answer calls for you when you are unavailable to answer the phone or when your line is
busy. Messages are recorded by the telephone service provider, not your telephone.
Feature Operation
Storing the Voice Mail
(VM) access number
1{MENU}{0}{7}{1}
2Enter your access number (max. 32 digits). i{Save}
i{OFF}
Listening to Voice Mail
messages
1Press {C} or {s}, then press {VM}within 15 seconds.
2Follow the pre-recorded instructions.
3Press {OFF}when finished.
For further information, visit http://www.panasonic.com/phonehelp
TG562x_QG(e).fm Page 3 Tuesday, December 13, 2005 2:57 PM
All manuals and user guides at all-guides.com

–4 –
Quick troubleshooting
Place the handset on the base unit,
then check if CHARGE indicator is on.
CHARGE indicator is OFF. CHARGE indicator
is ON.
Unplug and then plug AC
adaptor properly to both
the base unit and AC
outlet.
Unplug the AC adaptor of the base unit and remove the
battery from the handset, then plug in the AC adaptor
and insert the battery into the handset again. Try re-
registration as explained later in this guide.
Lift the handset, then try again.
If handset still shows the same
message, try re-registration as
explained later in this guide.
CHARGE indicator
is still OFF.
Re-registration
failed.
Re-registration
failed.
CHARGE
indicator is ON,
now.
Your telephone may need service. For further troubleshooting,
please visit http://www.panasonic.com/phonehelp
“No link to base. Move closer to base, try again.”
1Handset shows:
OR
TG562x_QG(e).fm Page 4 Tuesday, December 13, 2005 2:57 PM
All manuals and user guides at all-guides.com

–5 –
Quick troubleshooting
Lift up the handset from the base unit
or charger.
Press {C} (TALK) at the handset,
then check if the display shows
“Talk”.
Press {s} (SP-PHONE),
then check if the dial
tone is heard from the
speaker on the back.
No dial tone
Still no dial tone
Dial tone is heard.
Your telephone may need service.
Please visit http://www.panasonic.com/phonehelp for further
troubleshooting.
{C}
{s}
“No link to base.
Move closer to
base, try again.”
is displayed.
“Talk” is
displayed.
Check the telephone
cord is properly
connected to both
the base unit and
telephone jack on
the wall.
Try remedy for 1
on previous page.
Your telephone may
need service when
only back speaker
provides a dial tone.
2No dial tone is heard from handset.
No link to base.
Move closer to
base, try again.
Talk
K (VE) Mute L
TG562x_QG(e).fm Page 5 Tuesday, December 13, 2005 2:57 PM
All manuals and user guides at all-guides.com

–6 –
Frequently asked questions
Question Cause/solution
How can I increase
handset volume level?
LPress navigator key {^} repeatedly while talking.
Why is the conversation
noisy or cutting off?
LTry to relocate the base unit so that distance from location
to use the handset will be minimized.
LSend your unit to service, if your unit has same problem
when the handset is next to the base unit.
Can I add another
accessory handset to my
base unit?
LKX-TG5622
Yes, you can add up to 1 additional accessory handset.
LKX-TG5621/KX-TG5623
No accessory handset can be added for these models.
LTo purchase accessory handset (KX-TGA560), please
visit: www.panasonic.com
Can I keep battery
charging all the time?
LYou can leave handset on the base unit or charger
anytime. There is no damage to the battery.
How can I answer a call-
waiting call (2nd call)?
LPress {CALL WAIT}when you hear call-waiting tone.
For further troubleshooting information, visit http://www.panasonic.com/phonehelp or
refer to Operating Instructions.
TG562x_QG(e).fm Page 6 Tuesday, December 13, 2005 2:57 PM
All manuals and user guides at all-guides.com
all-guides.com

–7 –
Registering a handset to base unit
The included handset and base unit are preregistered. If for some reason the handset is
not registered to the base unit, register the handset.
For further registration information, visit
http://www.panasonic.com/RegisterYourHandset
Handset
Press {MENU}, then press {0}{0}.
Handset
Press {OK}.
Base unit
LKX-TG5621
Press and hold {HANDSET LOCATOR}until
the CHARGE indicator flashes.
LKX-TG5622/KX-TG5623
Press and hold {1}, {2}, or {3}until the
CHARGE indicator flashes.
LComplete next step within 1 minute.
Refer to manual
to prepare base.
Then press OK L
Refer to manual
to prepare base.
Then press OK L
{MENU}
{OK}
TG562x_QG(e).fm Page 7 Tuesday, December 13, 2005 2:57 PM
All manuals and user guides at all-guides.com

1Read this Quick Guide or Operating
Instructions
LIf you lost Operating Instructions, you can download at
http://www.panasonic.com/phonehelp
2Visit our website:
http://www.panasonic.com/phonehelp
LFAQs and troubleshooting hints are available.
3Contact us via the web at:
http://www.panasonic.com/contactinfo
4Call us at:
1-800-211-PANA (1-800-211-7262)
LMonday - Friday 9:00am - 9:00pm (EST),
Saturday/Sunday 10:00am - 7:00pm (EST)
To order a replacement battery,
please call: 1-800-332-5368
Or visit:
http://www.panasonic.com/batterystore
IMPORTANT!
If your product is not
working properly. . .
TG562x_QG(e).fm Page 8 Tuesday, December 13, 2005 2:57 PM
All manuals and user guides at all-guides.com