Panasonic KX-TS730 User manual

PQQW14727XA F0305-2055 D
Please read the operating instructions for further details.
Connections
Note:
LUse only the included Panasonic AC adaptor PQLV10 (9V/850 mA).
LThe AC adaptor must remain connected at all times. (It is normal for the adaptor to feel
warm during use.)
LThe AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the
adaptor may cause it to become disconnected.
LThe unit will not work during a power failure.
To disconnect the
interface cable, pull
out the cable while
pushing the tabs.
AC adaptor
Telephone
line cord
To single-line
telephone jack
(RJ11C)
To power outlet (120 V AC, 60 Hz)
Fasten
the AC
adaptor
cord.
Hooks
Interface cable
1
2
Bottom of the
interface box
Fasten the
interface cable.
Interface box
Model No. KX-TS730
Quick Guide
PQQW14727XA.fm 1 ページ ２００５年６月３日 金曜日 午前１０時１分

–2 –
{<}and {>}keys / Function keys
The keys work as the speaker volume keys.
Pressing the keys allows you to scroll through function menu.
Pressing the keys allows you to enter the caller list.
By pressing a function key, you can select the function displayed
directly above it.
Basic operation
Feature Operation
To make a call Dial the phone number, then press {s}.
To hang up Press {s}.
To adjust the receiver or speaker
volume
While using the speakerphone, press {<}or {>}
repeatedly.
To redial the last number dialed Press {s}, then press {REDIAL}.
To make a call using the redial
list
Press {REDIAL}. Press {<}or {>}repeatedly to
display the desired number. Then, press {s} or
{CALL}({F3}key).
To answer a call Press {s} when hearing rings.
Note:
LAt the beginning of a call, both parties should speak alternately. This enables the unit to
adapt to its environment and let both parties speak effectively.
LIf the other party has difficulty hearing you, press {<}to decrease the speaker volume.
LUse the unit in a quiet room.
PLAY
k
MENU
PQQW14727XA.fm 2 ページ ２００５年６月３日 金曜日 午前１０時１分

–3 –
Recording/Playing back a conversation
Feature Operation
To record a conversation Press {REC.}({F1}key), while talking.
LTo stop recording, press {STOP}.
To play back a recorded
conversation
Press {PLAY}({F1}key).
To stop playback Press {STOP}.
To change fast-forward speed Press {FF}({F3}key).
LEach time you press, the speed will change (four
times or sixty times normal speed).
To change rewind speed Press {REW}({F1}key).
LEach time you press, the speed will change (four
times or sixty times normal speed).
To repeat a recorded
conversation (during playback)
Press {*} (<).
To skip a recorded conversation
(during playback)
Press {#} (>).
To pause playback Press {0}(22).
To erase a specific conversation 1Press {ERASE}({F2}key) during playback.
2Press {SELECT}({F3}key) at “Individual
erase”.
To erase all conversations 1Press {ERASE}({F2}key) during playback.
2Press {<}or {>}to select “All erase”.
3Press {SELECT}({F3}key).
Many states have imposed regulations on the manner in which 2-way telephone
conversations may be recorded, so you should inform the other party that the
conversation is being recorded. Consult your telephone service provider for further
information.
PQQW14727XA.fm 3 ページ ２００５年６月３日 金曜日 午前１０時１分

–4 –
Phonebook
Adding items to the phonebook
1Press {k} ({F3}key).
LThe display shows the number of
items in the phonebook.
2Press {ADD}({F1}key).
3Enter the name (max. 16 characters).
4Press {SET}.
5Enter the phone number (max. 32
digits).
6Press {SET}or {SAVE}({F3}key).
LTo add other items, repeat from step
2.
7Press {STOP}.
Calling someone in the phonebook
1Press {k} ({F3}key).
2Press {<}or {>}to scroll the phonebook items.
LTo exit the phonebook, press {STOP}.
3Press {CALL}({F1}key) or {s}.
Caller list
Viewing the caller list and calling back
1Press {MENU}({F2}key), then press
{SELECT}({F3}key) or {SET}.
LYou can use {<}or {>}to enter the
caller list.
2Press {<}to search from the most
recent call, or press {>}to search
from the oldest call.
LTo exit the caller list, press {STOP}.
3Press {CALL}({F1}key) or {s}.
Displayed symbols
LIf the same caller calls more than once,
it will be displayed with the number
(“×2” to “×9”). Only the date and time
of the most recent call will be stored.
LA Qis displayed next to items which
have already been viewed or
answered.
CHAR.
PQQW14727XA.fm 4 ページ ２００５年６月３日 金曜日 午前１０時１分

–5 –
Programming via direct commands
You can program most features using “direct commands”—special codes that take you
directly to the feature you wish to program and allow you to select the desired setting.
There is no need to scroll through the unit’s sub-menus.
1Press {MENU}({F2}key), then press {#}.
2Enter the desired feature code (shown below).
3Enter the desired setting code (shown below).
LThis step may vary depending on the feature being programmed.
4Press {SAVE}({F3}key).
5Press {STOP}to exit programming mode.
Direct commands chart
Feature Feature code Setting code
Ringer volume {1}{6}{0} {1}: Low {2}: Medium
{3}: High {0}: Off
Ringer tone {1}{6}{1} {1}–{3}: Tone pattern 1–3
LCD contrast {1}{4}{5} {1}–{6}: Level 1–6
Key tone {1}{6}{5} {1}: On {0}: Off
Caller ID number auto edit {2}{1}{4} {1}: On {0}: Off
Set dial mode {1}{2}{0} {1}: Pulse {2}: Tone
Set flash time {1}{2}{1} {1}: 900 ms {2}: 700 ms
{3}: 600 ms {4}: 400 ms
{5}: 300 ms {6}: 250 ms
{7}: 200 ms {8}: 160 ms
{9}: 110 ms {0}: 100 ms
{*}: 90 ms {#}: 80 ms
Change language {1}{1}{0} {1}: English {2}: Spanish
BACK
PQQW14727XA.fm 5 ページ ２００５年６月３日 金曜日 午前１０時１分

1Read this Quick Guide or Operating
Instructions
2Visit our website:
http://www.panasonic.com/
consumersupport
3Contact us via the web at:
http://www.panasonic.com/contactinfo
4Call us at: 1-800-211-PANA (7262)
IMPORTANT!
If your product is not
working properly. . .
PQQW14727XA.fm 6 ページ ２００５年６月３日 金曜日 午前１０時１分