Panasonic MC-CG525R747-KW User manual

© 2012 Panasonic Manufacturing Malaysia Berhad
(6100-K). Unauthorized copying and distribution is a
violation of law.
PMMA120406CE
Vacuum Cleaner
Model No. MC-CG525R747-KW
MC-CG525R747-NG
MC-CG525R147-AE
MC-CG525R149-AE
MC-CG525R149-JO
MC-CG525R149-LB
MC-CG525R149-QA
MC-CG525R149-LY
MC-CG525R149-EG
MC-CG525R149-PK
MC-CG525R149-OM
MC-CG525R747-SA
Destination : SD2, KUWAIT, NIGERIA, UAE, GENERAL,
JORDAN, MIDDLE EAST, PGF, EGYPT,
LIBYA, QATAR, LEBANON, OMAN AND
AFRICA GENERAL
TABLE OF CONTENTS
PAGE PAGE
1 Specifications ----------------------------------------------------- 3
2 Schematic Diagram ---------------------------------------------- 3
3 Wiring Connection ----------------------------------------------- 4
4 Trouble Shooting Chart ---------------------------------------- 5
5 Disassembly and Assembly Instruction ------------------ 7
5.1. Disassembly of Upper and Lower Body--------------7
5.2. Disassembly of Motor Case Set------------------------8
5.3. Disassembly of Cord Reel Unit -------------------------9
5.4. Disassembly of Rail Base Unit--------------------------9
5.5. Disassembly of Fan Motor Unit----------------------- 10

2
6 Exploded View and Replacement Parts List ----------- 11
6.1. Exploded View -------------------------------------------- 11
6.2. Attachment Exploded View ---------------------------- 12
6.3. Packing Instruction--------------------------------------- 13
6.4. Replacement Parts List--------------------------------- 14

3
1 Specifications
2 Schematic Diagram
Model MC-CG525
Power Source 220V~240V~50/60Hz
Input Power (Max) 1700W
Input Power (IEC) 1400W - 1650W
Power Control SLIDE
Dust Capacity 3.0L
Automatic Cord Rewind 0
Vac Gauge 0
Exhaust Filter ANTI-BACTERIA
Extension Wands METAL TELESCOPIC WAND
Blower Operation 0
Floor Nozzle 2-STEP
Dust Bag CLOTH BAG
Dimension (H x W x L) mm 240mm X 304mm X 450mm
Net Weight 4.5 KG
Cord Length 5.0 M
Cleaning Tools CREVICE TOOL / DUSTING BRUSH

4
3 Wiring Connection

5
4 Trouble Shooting Chart

6

7
5 Disassembly and Assembly Instruction
5.1. Disassembly of Upper and
Lower Body
Step 1 Open Dust Cover & remove Dust Bag.
Step 2 Release Dust Cover from Hanger.
Step 3 Remove 2 screws from the Front Side.
Step 4 Release 2 catches using Philip Screwdriver.
Step 5 Remove Body Cover.
Step 6 Take out Filter (sponge)
Step 7 Release 4 catches to take out the pedal.

8
Step 8 Remove 4 screws from Upper Body .
Step 9 Take out Upper Body from Lower Body.
5.2. Disassembly of Motor Case Set
Step 1 Pull out the Swicth On/Off.
Step 2 Remove Volume Ass’y from Motor Case Set.
Step 3 Pull up Motor Case Set from Lower Body.

9
5.3. Disassembly of Cord Reel Unit
Step 1 Pull up the Cord Reel Unit.
Step 2 Remove 2 Connector Wires from Rail Base Unit.
Step 3 Release Printed Circuit Board (PCB) from catches.
5.4. Disassembly of Rail Base Unit
Step 1 Remove the Cord Reel Unit from the Rail Base Unit by
insert a slotted screwdriver into the shaft of the Cord Reel Unit
and turning it 90counter-clockwise.
Step 2 Remove Cord Reel Unit from Rail Base Unit.
To assemble:
-Turn the Cord Reel Unit holding on the plug
-Number of turns for pretension of the Cord is engraved on the
steel at the side of Cord Reel Unit.
Step 1 Assemble in reverse order of the disassembly.
Step 2 Pretension the Cord Reel Unit.

10
5.5. Disassembly of Fan
Motor Unit
Step 1 Pull up Motor Set.
Step 2 Remove Silicon Cloth.
Step 3 Disconnect Wire Terminals.
Step 4 Remove Motor Support Rubbers.