Pandigital PAN1002W02T User manual

1
Pandigital
Digital Photo Frame
User Guide

2
Table of Contents
Important Safety Precautions ..............................................................................4
Cleaning the Digital Photo Frame...................................................................4
Introduction..........................................................................................................5
What’s In the Box.................................................................................................5
Setting Up the Digital Photo Frame.....................................................................6
Using the PanTouch Buttons and Remote Control..............................................7
Use the PanTouch Buttons.............................................................................7
Use the Remote Control..................................................................................7
Install and Replace the Remote Control Battery.............................................8
Using the Digital Photo Frame’s Screens............................................................8
The HOME Screen..........................................................................................8
The Thumbnails Screen..................................................................................9
Display a Single Photo on the Full Screen ...............................................10
Rotate a Photo on the Full Screen............................................................11
Enlarge a Photo on the Full Screen..........................................................11
Starting and Customizing Slideshows ...............................................................11
Play a Slideshow of All Photos......................................................................11
Play a Slideshow of Selected Photos Only...................................................12
Play Music with the Slideshow......................................................................12
Control the Volume .......................................................................................13
Connecting Speakers to the Photo Frame.........................................................13
Watching a Video...............................................................................................13
Photo Copy Method Options..............................................................................14
Changing the Photo Copy Method................................................................14
Copying Photos from a Memory Card to Built-in Memory .................................14
Copy a Single Photo .....................................................................................14
Copy Several Photos ....................................................................................15
Deleting Photos from the Built-in Memory .........................................................16
Delete the Displayed Photo...........................................................................16
Delete a Single Photo on the Thumbnails Screen ........................................17
Delete Several or All Photos in the Built-in Memory .....................................17
Bluetooth Setting ...............................................................................................18
Setting Viewing Options.....................................................................................19
Displaying a Clock with a Calendar and a Slideshow........................................19
Set the Internal Clock....................................................................................19

3
Set the Alarm ................................................................................................20
Create a Schedule for Playing Slideshows...................................................20
Turn Scheduled Slideshows On or Off..........................................................21
Network Photo ...................................................................................................21
Changing the Decorative Frame...................................................................22
Copying Files from a Computer or Flash Drive..................................................23
Connect to a Windows Computer .................................................................23
Disconnect the Digital Photo Frame from the Computer...............................25
Connect a USB Flash Drive..........................................................................25
PanTouch (Slideshow) Setup Menu..................................................................26
Frequently Asked Questions..............................................................................26
Limited Warranty................................................................................................28
FCC Statement..................................................................................................29
FCC Part 15 Information...............................................................................29
UGE720610TSCV2.5

4
Important Safety Precautions
Always follow these basic safety precautions when using your Digital Photo
Frame. This will reduce the risk of fire, electric shock, and injury.
Warning: Do not expose this product to rain or moisture.
Warning: Do not remove the cover. There are no user-serviceable parts inside.
Refer all servicing to qualified personnel.
•The Digital Photo Frame is for indoor use only.
•Unplug the Digital Photo Frame before performing care and maintenance.
•Do not block the ventilation holes on the back of the digital photo frame at
any time.
•Keep your Multimedia Digital Photo Frame out of direct sunlight and heat
sources.
•Protect the power cord. Route power cords so that they are not likely to
be walked on or pinched by items placed on or against them. Pay
particular attention to the point where the cord attaches to the Digital
Photo Frame.
•Only use the AC adapter included with the Digital Photo Frame. Using any
other power adapter will void your warranty.
•Unplug the power cord from the outlet when the unit is not in use.
Cleaning the Digital Photo Frame
Treat the screen gently, it is made of glass and can break. To clean fingerprints or
dust from the LCD screen, we recommend using a soft, non-abrasive cloth such
as a camera lens cloth to clean the LCD screen. If you use a commercial LCD
Cleaning Kit, do not apply the cleaning liquid directly to the LCD screen. Clean the
LCD screen with cleaning cloth moistened with the liquid.
Clean the outer surface of the Digital Photo Frame (excluding the screen) with a
soft cloth dampened with water.

5
Introduction
Welcome to the Pandigital Multimedia Photo Frame! Now you can display your
digital photos directly from your memory card, no computer is necessary. Simply
insert a memory card into the Digital Photo Frame, and turn on the power. You’ll
be treated to a slideshow of your photos. It’s as easy as that. You can also display
individual photos, play video clips, and play background music with your slide
show.
The Digital Photo Frame includes these key features:
•Displays digital photos, plays music files and digital videos without a
computer; simply insert a compatible memory card into the digital frame.
Memory card is not included and supported file types are described
below.
•Displays Slideshows of Digital Photos with background music.
•Compatible memory cards include Secure Digital™, MultiMedia Card™,
xD Card, Compact Flash™, Memory Stick™, MemoryStick Pro™, and
Memory Stick Pro Duo™.
•Supported file types: JPEG images (up to 16 Mega Pixels), Most popular
video format, and MP3 music files.
•Control the main functions with PanTouch on the frame or with the
included infrared remote control.
•Bright TFT active matrix LCD screen.
•USB2.0 high-speed connection to connect to your PC.
•USB2.0 (Host) for connecting to your digital camera.
•Built-In Flash Memory.
To learn more about your new Digital Photo Frame’s features and take full
advantage of them, please take a few minutes to read this Guide.
What’s In the Box
•Digital Photo Frame
•AC Power Adapter
•This User’s Guide, Quick Start Guide and Warranty Card
•Remote Control
•USB Cable
•Decorative Frame (May varied by models)

6
Setting Up the Digital Photo Frame
The Digital Photo Frame is easy to set up. Just follow these steps:
1. Plug the AC Power Adapter into the Digital Photo Frame and into a wall outlet.
2. Insert a memory card into the appropriate slot.
Slot 1 - Compact Flash™
Slot 2 - Secure Digital™ or MultiMedia Card™,
Memory Stick™, MemoryStick Pro™, Memory Stick Duo™, or Memory Stick
Pro Duo™, or xD Memory Card™
Note: The card will only fit in one direction; do not force it. The card should fit
snugly when properly inserted.
3. Slide the POWER button on the left side of the Digital Photo Frame up, the
Digital Photo Frame will power on and automatically start a slideshow of the
photos on the card. Slide the POWER button down to power off.
4. To display photos individually, press the EXIT button on the remote control to
pause slideshow.
5. Press of Exit button will display thumbnail screen. Use the directional arrows
to choose a photo. Press the Enter on the top of the Digital Photo Frame, on
the remote control. The selected photo is displayed on the Digital Photo
Frame.
Note: Pull the plastic tab sticking out of the remote control. It protects the
battery, and the remote control will not work unless it is removed.
6. To restart the Slideshow, press the Enter key again, or press the Slideshow
button on the remote control.

7
Using the PanTouch Buttons and Remote Control
You can use all of the Digital Photo Frame’s features with either the PanTouch
buttons on top of the frame or using the remote control.
Use the PanTouch Buttons
The PanTouch buttons are located along the top and the right sides of the picture
frame. To activate, the User Interface, touch the upper right corner of the frame
(on the glass) and the touch icons will appear.
Their basic functions are the same no matter when you press them.
Button Action
Move the selection up or left, display the previous photo, or select the
previous file.
ENTER Select the highlighted option, start a Slide Show, Pause or Play.
Move the selection down or right, display the next photo or select the next
file.
SETUP Open the Onscreen Menu.
Use the Remote Control
The remote control included with your digital photo frame includes all of the
functions on the digital photo frame and some additional ones. The figure below
shows all of the buttons and describes them. The features described in this guide
that use the remote illustrate how to use them.

8
Install and Replace the Remote Control Battery
1. Push the hook to right side with a nib.
2. And, pull the Battery holder.
3. Place a “CR2025” Lithium battery on the tray with the positive “+” end facing
toward you.
4. Close the holder.
Using the Digital Photo Frame’s Screens
You access the Digital Photo Frame’s functions from either the Edge Touch
interface, the buttons located at the top of the picture frame or with the remote
control.
This user guide primarily describes the use of the remote control. Please see the
PanTouch Quick Guide for instructions on using the PanTouch interface.
The HOME Screen
The HOME Screen gives you the following choices listed below.

9
Photo Open the Thumbnails Screen to display still photos
and jpeg slideshows.
Music Play MP3 music files.
Video Play Video files.
File View all of the files on the memory source.
Clock Show the current date and time, use alarm and schedule On/Off functions.
Network
Photo Connect to Picasa Web Album to stream photos to your DPF
1. Press the Left and Right arrows on the Remote Control or the Digital
Photo Frame to select Photo, Music, Video, File, Clock, or Network Photo;
press ENTER to make the selection.
2. If you select Photo, screen will prompt you the select file sources. Then
The Thumbnails Screen will open. It is described below.
3. If you select Music, a screen opens and lists all of the music files. If you
select Videos, a screen opens and lists all the video files. You can select
one in the same manner as a photo. If you select Clock, the Calendar and
Clock are displayed; this screen is described later in this manual.
4. To go back to the Mode Selection Screen, press Exit or Back or Home
button.
The Thumbnails Screen
This screen gives you thumbnail view of all photos on the selected memory
source. Use this screen to select a single photo to display, multiple or all photos to
do slideshow, and copy photos from external memory to build-in memory.

10
Display a Single Photo on the Full Screen
You can choose a single photo to display on the full screen, without a Slideshow:
1. From the Home screen, choose Photo. The Thumbnails Screen opens. To
“Go Back” press the Home button again.
2. Use the Left (BACK) and Right (FWD) buttons on the Remote Control or the
Digital Photo Frame until the desired photo is highlighted. The photo’s
filename and size are displayed at the top of the screen. The other number
indicates how many screens of photos are in the memory, and which one is
displayed.
3. Press ENTER (Select and View) to display the selected photo on the full
screen.
4. Press the BACK (Left) Arrow to return to the previous photo.
5. Press the FWD (Right) Arrow to display the next photo.
6. Slide from Left to Right to navigate next photo (or to navigate previous photo if
slide from Right to Left).
7. To stop the display and return to the Thumbnail screen, press the EXIT (Back)
button.

11
Rotate a Photo on the Full Screen
You can rotate a displayed photo by pressing the ROTATE button both on the
PanTouch button and on the Remote Control. The photo will be rotated by 90
degrees clockwise in each press of the ROTATE button.
Enlarge a Photo on the Full Screen
You can magnify a displayed photo on the full screen by pressing ZOOM butt on
Remote Control. The photo is magnified in size each time you press the ZOOM
button, until it returns to the normal size. While the photo is in enlarged, use the
Left (BACK) or Right (FWD) buttons to move the photo so you can see the
portions that aren’t currently visible. To zoom using PanTouch, activate PanTouch
buttons in Photo mode and touch Zoom button.
Starting and Customizing Slideshows
The Digital Photo Frame can include all of the photos on the selected memory
source in the slideshow, or you can select specific photos for the slideshow. You
can also add music to your slideshow.
Play a Slideshow of All Photos
Use the remote control to operate:
With the Thumbnails Screen displayed, press the SLIDESHOW button on the
Remote Control or the SETUP, START SLIDESHOW and Slideshow All for the
slideshow of all photos in the selected memory.
Use the PanTouch to operate:

12
With the Thumbnail Screen displayed, press the PanTouch point to activate the
sensor, then press VIEW to play a slideshow of all photos.
To stop the Slideshow and return to the Thumbnails screen, press the BACK
button twice.
Play a Slideshow of Selected Photos Only
To remote control to create a custom slideshow:
1. With the Thumbnails Screen displayed, use the arrow buttons to highlight a
photo.
2. Press “+” key to select the photo or “-” key to de-select it (these functional
buttons only exist on your remote).
3. Continue selecting or de-selecting photos in the same manner.
4. When all desired photos are selected, press SETUP on the Remote Control to
open a Setup Menu.
5. Select Start Slideshow and choose Slideshow Selected in the submenu to
start the custom slideshow.
To PanTouch to create a custom slideshow:
1. With the Thumbnails Screen displayed, use the arrow buttons to highlight a
photo.
2. Press SELECT as choosing for the custom slideshow. Press UN-SELECT
(same button) again to un-select. A check mark is displayed at the
PanTouch point of the selected photo.
3. Continue selecting or de-selecting photos in the same manner as paging
down to next thumbnail pages.
4. When all desired photos are selected, press PLAY to start the custom
slideshow.
Play Music with the Slideshow
To play background music with a slideshow, copy MP3 files onto the same
memory card as your photos. The music will play as the slideshow runs. See
Copying Files from a Computer section for details on copying files. You can also
choose a music file to play without a slideshow. Just select it from the Music
screen.
Note: Music files must be standard MP3 format and not from licensed music
download services.

13
To stop the music, press the SLIDE SETUP button and press MUSIC OFF button.
Press MUSIC ON button again to turn on music.
Control the Volume
Use the PanTouch or Remote Control to adjust the volume on the Digital Photo
Frame when playing MP3 files.
Press the VOL-and VOL+ buttons to adjust the volume down and up.
Connecting Speakers to the Photo Frame
The Digital Photo Frame has built-in speakers, but you can also connect external
speakers and an external amplifier. Plug the speaker into the earphone jack
located on the right side of Digital Photo Frame (Cable not included).
Watching a Video
You can watch video files on your Digital Photo Frame as well. It supports the
Motion JPEG (AVI) video formats used by most digital cameras.
To watch a video, there need to be video files on the memory card. Use the
remote control to operate:
1. Insert a memory card with video files on it. Press the EXIT button on remote
control until you reach Home screen.
2. Press the SETUP button and go down to Select Media Menu. Choose the
desired Media available.
3. Go back to Home screen to select Video.
4. Use the Arrow keys to choose Video and press Select. A screen listing all of
the video files opens.
5. Use the Arrow buttons to choose the desired file and press Enter, The Digital
Photo Frame plays the video.
6. Adjust the volume by using VOL+/VOL– buttons on the Remote Control.
7. To play another video file, go back to the PanTouch Home Menu and press
LEFT or RIGHT button to Video and press ENTER. Press VIEW from the file
listing, or toggle Up or Down button to highlight another video file and press
VIEW.
Use the PanTouch to operate:
1. Insert a memory card with video files on it. Press the PanTouch point to
activate the sensor and the BACK button until you reach Home screen.

14
2. Press the SETUP button and go down to Select Media Source from System
Setup Menu. Choose the desired Media available in highlights.
3. Go back to Home screen to select Video.
4. Use the Arrow keys to choose Video and press Select. A screen listing all of
the video files opens.
5. Use Arrow buttons to choose the desired file and press Play. The Digital
Photo Frame plays the video.
6. When video is playing, touch PanTouch point, Adjust the volume by using
VOL+/VOL– buttons on PanTouch button menu.
7. To play another video file, press BACK button to go back to VIDEO list screen,
and press UP and DOWN arrow button to select desired video, press PLAY to
play.
Photo Copy Method Options
There are two methods to copy photos from an external memory card to the built-
in memory. One is called optimized and the other, non-optimized. In the case of
optimized copy, the original photo is downscaled in size and re-encoded into a
smaller sized JPEG., thus a lot more photos can be stored in the built-in memory.
The non-optimized photo copy will simply copy the original photo file into the built-
in memory.
Changing the Photo Copy Method.
The DPF is produced with optimized photo copy as default. To change to non-
optimized, go to the PanTouch Home Menu, press the setup button and select
Photo Copy Method.”
1. Select “Non-optimized” to make photo copy in the original photo file size.
2. Select “Optimized” to go back to automatically compress your pictures before
copying to built-in memory.
3. Press BACK to close the menu.
Copying Photos from a Memory Card to Built-in
Memory
The Digital Photo Frame can store photos in its built-in memory. You can copy
photos one at a time, or in batches.
Copy a Single Photo
Use the Remote Control to copy a photo from a memory card to the built-in
memory.

15
1. Press the EXIT button until the HOME screen displayed, press SETUP to
choose Select Media option then press ENTER.
2. Use the Arrow buttons to highlight the desired media source.
3. Press the ENTER button to select the media source. Go back to Home screen
4. Select Photo and press ENTER. The Thumbnails screen opens.
5. Use the Arrow Buttons to highlight and Select the photos you want to copy.
6. Press the SETUP button. The on-screen setup menu opens on the Digital
Photo Frame.
7. Choose Copy Photo then submenu Copy Selected and press ENTER. The
message displays “Finish” on the lower right screen. Note: the default setting
is “Optimized” for copy photo into Digital Picture Frame built-in memory.
8. Press EXIT to return to the Thumbnails screen.
Use the PanTouch Menu to copy a photo from a memory card to the built-in
memory.
1. Press the SETUP button from the Home screen.
2. Select Media Source.
3. Use the Arrow buttons to highlight the desired memory card.
4. Press the SELECT button to select the card.
5. Press Back from PanTouch menu to go back to Home screen.
6. Highlight Photo and press ENTER. The Thumbnails screen opens.
7. Use the Arrow Buttons to highlight the photo you want to copy.
8. Press the SELECT button on the highlighted photo.
9. Press the COPY SEL to copy selected file.
10. Once the copying is complete, a “Finished!” message is displayed.
Copy Several Photos
Use the Remote Control to copy photos from an external (e.g. memory card)
media source to built-in memory.
1. Press the EXIT button until the Home screen opens.
2. Press SETUP on the remote control, an on-screen menu open, then use arrow
key to highlight Select Media option, then press ENTER, submenu open.
3. Use arrow key to select desired memory, then Press ENTER. Press EXIT key
twice to return to Home screen.

16
4. Select Photo and press Enter, The Photo Thumbnails screen opens.
5. Use the Arrow Buttons to highlight the photo you want to copy.
6. Use the “+” button to select the photo. A check mark should appear at the
middle of the thumbnail frame of the selected photo. Use the “-“ button to de-
select it if you want to.
7. Continue selecting or de-selecting photos in the same manner. After
completing the photo selection, press the SETUP button to open the on-screen
setup menu.
8. Press the Up or Down arrow to select Copy Photo and press ENTER.
9. Choose Copy Selected option and press ENTER to copy the selected photos.
Use the PanTouch Menu to copy all photo from a memory card to the built-in
memory.
1. Press the SETUP button from the Home screen, an on-screen SETUP menu
opens.
2. Use UP and Down arrow button to Select Media Source.
2. Use the Arrow buttons to highlight the desired memory card.
3. Press the SELECT button to select the card.
4. Press BACK to go back to Home screen.
5. Highlight Photo and press ENTER. The Thumbnails screen opens.
6. Press the COPY ALL button.
7. Once the copying is complete, a “transferring and Finished!” dialog will be
displayed.
Deleting Photos from the Built-in Memory
You can delete photos from built-in memory, but not from memory cards using the
remote control.
Delete the Displayed Photo
Use the Remote Control to operate:
1. With the internal photo displayed on the screen, press the SETUP button.
2. Press the Up or Down arrow key to select Delete Photo.
3. Press ENTER to delete the displayed photo.
4. Press EXIT to close the menu.

17
Use the PanTouch menu to delete:
1. With the photo displayed on the screen, press the PanTouch point to activate
the sensor.
2. Press DELETE to delete the displayed photo.
Note: It is a good idea to keep backup copies of the photos you copy onto your
Digital Photo Frame.
Delete a Single Photo on the Thumbnails Screen
Use the Remote Control to operate:
1. With the Thumbnails Screen displayed, use Arrow buttons to select a photo to
a delete.
2. Press the SETUP button.
3. Press the Up or Down arrow to choose Delete Photo and press ENTER.
4. Choose delete selected option to delete the highlighted photo.
Caution: You will not be asked to confirm or have a chance to change your mind.
It is a good idea to keep copies of the photos you copy onto your Digital
Photo Frame.
Use the PanTouch menu to delete:
1. Go to the Photo Thumbnails screen.
2. Use the Arrow Buttons to highlight the photo you want to delete.
3. Press the SELECT button on the highlighted photo.
4. Press the DELETE SEL button to delete selected file.
Once the deletion is complete, a “Finished!” message display in the middle of the
screen.
Delete Several or All Photos in the Built-in Memory
You can use the Remote Control to delete several or all photos from the internal
memory.
1. With the Thumbnail screen displayed, press the Arrow Buttons on the Remote
Control or the Digital Photo Frame until the desired photo is highlighted. The
photo’s filename is displayed at the top of the screen. The notations at the top
of the screen also indicate how many screens of photos are on the memory
card.
2. Press the “+” button or “–“ button on the Remote Control to select or unselect
the highlighted photo. Selected photos will have a check in the thumbnail

18
photo window.
3. Press the SETUP button. A setup menu opens.
4. Press the Up or Down arrow to choose Delete Photo and press ENTER. Two
submenu options will be provided: Delete Selected or Delete All. Choose
Delete Selected to delete the marked photos or choose Delete All to delete all
photos.
Caution: You will not be asked to confirm or have a chance to change your mind. It
is a good idea to keep copies of the photos you copy onto your Digital Photo
Frame.
5. Press EXIT to close the menu.
Use the PantTouch Menu to delete photos from the internal memory.
1. Go to the Photo Thumbnails screen.
2. Use the Arrow Buttons to highlight the photo you want to delete.
3. Press the SELECT button on the highlighted photo.
4. Press the DELETE SEL button to delete selected photos, or press the
DELETE ALL button to delete all photos in built-in memory. Once the
deletion is complete, a “Finished!” message display in the middle of the
screen.
Bluetooth Setting
Bluetooth USB Dongle Required. USB Bluetooth Dongle Support connectivity to
popular mobile phones; e.g.: BlackBerry, Motorola, Nokia, SonyEricssson and others.
Note: Models may vary; please ensure the phone supports transmitting Photo to
devices like DPF.
Step 1: Setting up your Bluetooth Personal Area Network (PAN) after insert
USB Bluetooth Dongle into the DPF.
a. Insert to the USB host port and then turn on the DPF. Please check
Pandigital’s website for the comparable USB Bluetooth adapters.
http://www.pandigital.net
b. From Home screen, you can see the Bluetooth icon appears on the upper
right hand corner.
Step 2: Ensure the connectivity is established before sending photos to
DPF.
a. Search and Select the “Available Device” to connect from the list. You
should see “Pandigital” appears in the list. Authentication Code is “1234”
default value. Select “Pandigital” and continue transmitting photo to
DPF.

19
Note: the actual procedure of sending photo to your DPF may vary.
Please refer to your mobile device user guide manual for details.
b. When you transmitting selected photo to Pandigital DPF, you shell see
“Photo Transmitting” dialog appear in the middle of your DPF screen.
When copy photo completes, your DPF will play the copied photo immediately
after.
Setting Viewing Options
You can control all of the viewing options in the Setup Menu using the remote
control. You can display the on-screen Setup Menu at any time by pressing the
Setup button. Only available setup options will be displayed for each screen.
1. With the Home screen opens, press Setup to open the Setup Menu.
2. With the Setup Menu open, use the Up and Down arrows to choose a display
option.
3. Press ENTER to select the option. A second menu opens, listing the available
settings. A blue highlight shows the current setting.
4. Use the Up and Down arrows to choose the desired setting.
5. Press ENTER to select the setting. The second menu closes.
6. You can make as many changes as you wish in the same manner. When you
are finished, press the EXIT button to close the Setup Menu and return to the
previous screen.
Displaying a Clock with a Calendar and a Slideshow
You can use your Digital Photo Frame as a desk calendar with a real-time clock
and continuous slideshow. You can also use the Digital Photo Frame as an Alarm
Clock, after setting internal clock.
To Display the Calendar/Clock screen:
1. Open the Home Screen.
2. Use the arrow buttons to choose Clock and press ENTER. The slideshow
displays photos from the currently selected memory source, and if the alarm is
set, on alarm icon appears under the slideshow window.
Set the Internal Clock
When the Digital Photo Frame’s internal clock is set, you can use it as an alarm
clock.

20
1. To set the internal clock, choose CLOCK from the HOME screen to enter
CALENDAR/CLOCK screen then press SETUP to open the Setup menu by
remote control.
2. Choose Set Clock.
3. Use the RIGHT or LEFT arrow to move to a time or date field to be changed.
4. Use the Up and Down arrows to change the value in the selected field.
5. When the date and time are correct, press the ENTER button to set the time
and return to the SETUP screen. Press EXIT to close the Setup menu.
Set the Alarm
Use your Digital Photo Frame as an alarm clock. You can set it to alarm with a
built-in tone or playing a pre-stored MP3 music in the build-in memory. You can
also set the alarm to alert only once or daily after setup.
1. To set the alarm clock, choose CLOCK from the HOME screen to enter
CALENDAR/CLOCK screen then press SETUP to open the Setup menu by
remote control.
2. Choose Set Alarm.
3. Use the Left and Right arrows to move through the selection fields and the Up
and Down arrows to scroll through the values (time, alarm type or alarm
tone/music etc).
4. When finish, press Enter button to set the alarm. Press EXIT to close the
menu.
Create a Schedule for Playing Slideshows
You can set your digital photo frame to display slideshows at predetermined times.
1. To set ON/OFF Schedule and press SETUP button in HOME screen by
remote control.
2. Use the Arrow buttons to select ON/OFF Schedule and press SELECT. The
Set Schedule page opens with the Hours field for the Weekdays Turn on at
highlighted.
3. Use the Up or Down arrow to set the hour you want scheduled slideshows to
start (turn on at), then use the right arrow to move to the minutes field, set the
minutes in the same manner as the hours, and then move the highlight to the
AM/PM field.
4. Use the Up or Down arrow button to choose AM or PM.
5. Set the time you want the slideshow to end (turn off at) in the same manner.
6. Press the Enter button when Always OFF is highlighted if you don’t want to