Panduit Atlona AT-ANC-108D Technical manual

Atlona Technical Support: +1 877.536.3976 option 1
Update Instructions
AT-ANC-108D
The following procedure outlines the rmware update procedure for the AT-ANC-108D using the USB port.
1. Download the rmware from the Atlona web site.
2. Press and hold Button 1 while connecting power to the power receptacle on the rear of the unit. Button 1 will
ash three times, indicating that it is in rmware-update mode.
3. Connect a USB to mini-USB cable from the computer to the mini-USB port.
LAN
AT-ANC-108D
DC 5V
- +
4. The USB UPDATE folder will be displayed.
If this folder is not displayed, automatically, select the USB UPDATE drive from Windows Explorer.
Button 1
Mini-USB port
Power receptacle

Atlona Technical Support: +1 877.536.3976 option 1
Update Instructions
5. Delete all les from the USB UPDATE drive, if any are present.
6. Drag-and-drop the rmware le to the drive folder. Once the rmware update process has completed, the USB
UPDATE folder will close, automatically.
7. Disconnect the USB cable from the AT-ANC-108D. The unit is now ready for use.