Panduit R4PFP User manual

FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp
INSTRUCTIONS CM439B
© Panduit Corp. 2010
Page 1 of 4
4-Post Vertical Filler Panels
Part Number: R4PFP
Installation Instructions-Mounting Vertical Filler Panels to
4-Post Rack
R4PFP
Contents
(4) Vertical Filler Panels
(8) 1/4-20 Hex Nuts
(8) #12 Lockwashers
(2) Packs of (4) #12-24 Screws
(12) 1/4-20 Screws
(4) 1/4-20 Weld Nuts
Assembly Method:
-Install panels #1, #2, #3, and #4, in order, as oriented, onto frames of 4-post racks.
-Fasten panels together with hardware (as shown on pages 2-4).
Alternate Assembly Method:
Refer to pages 2-4 for rack spacing hardware orientation.
-Assemble top two panels (#1 and #2) together with hardware.
-Assemble bottom two panels (#3 and #4) together with hardware.
-Assemble top and bottom panels together with hardware.
-Install onto frames of 4-post racks.
Panel #1 Panel #2
Panel #3 Panel #4
4-Post Racks
(not included)
#12-24 Screws
and #12 Lock-
washers
#12-24 Screws
and #12 Lock-
washers
4-Post Racks
(not included)
4-Post Racks
(not included)
#12-24 Screws
and #12 Lock-
washers
#12-24 Screws
and #12 Lock-
washers
4-Post Racks
(not included)

6”
Installation Instructions-Orientation of Hardware with 6” Spacing Between Racks
Installation Instructions-Hardware Mounting Method
INSTRUCTIONS CM439B
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 2 of 4
Outside of panels Outside of panels
Inside of panels
Inside of panels
1/4-20 Screws
Must be through
(2) panels
1/4-20 Screws
Must be through
(2) panels
1/4-20 Standard Nuts
Fastened to Screws
1/4-20 Weld Nuts
Fastened to
Screws
Top View
Top View
Bottom Center
View
Top Center
View
Center View
Top Center View
Center View
Bottom Center View
Bottom View
Bottom View
(2) 1/4-20 Screws and
(2) 1/4-20 Standard
Nuts
(2) 1/4-20 Screws and
(2) 1/4-20 Standard
Nuts
(4) 1/4-20 Screws and
(2) 1/4-20 Weld Nuts

6.75”
INSTRUCTIONS CM439B
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 3 of 4
Installation Instructions-Orientation of Hardware with 6.75” Spacing Between Racks
Installation Instructions-Orientation of Hardware with 8” Spacing Between Racks
8”
Top View
Bottom Center
View
Top Center
View
Center View
Bottom View
Top View
Bottom Center
View
Top Center
View
Center View
Bottom View
Top View Top Center View
Center View
Bottom Center View Bottom View
Top View Top Center View
Center View
Bottom Center View Bottom View
(1) 1/4-20 Screw
and (1) 1/4-20
Standard Nut
(2) 1/4-20 Screws
and (2) 1/4-20
Standard Nuts
(2) 1/4-20 Screws
and (2) 1/4-20
Standard Nuts
(1) 1/4-20 Screw
and (1) 1/4-20
Standard Nut
(4) 1/4-20 Screws and
(2) 1/4-20 Weld Nuts
(1) 1/4-20 Screw
and (1) 1/4-20
Standard Nut
(2) 1/4-20 Screws
and (2) 1/4-20
Standard Nuts
(4) 1/4-20 Screws and
(2) 1/4-20 Weld Nuts
(2) 1/4-20 Screws
and (2) 1/4-20
Standard Nuts
(1) 1/4-20 Screw
and (1) 1/4-20
Standard Nut

INSTRUCTIONS CM439B
For instuctions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
E-mail:
[email protected]
Fax:
[phone]
www.panduit.com
10”
12”
Page 4 of 4
Installation Instructions-Orientation of Hardware with 10” Spacing Between Racks
Installation Instructions-Orientation of Hardware with 12” Spacing Between Racks
Top View
Bottom Center
View
Top Center
View
Center View
Bottom View
Top View
Bottom Center
View
Top Center
View
Center View
Bottom View
Top View Top Center View
Center View
Bottom Center View Bottom View
Top View Top Center View
Center View
Bottom Center View Bottom View
(1) 1/4-20 Screw
and (1) 1/4-20
Standard Nut
(1) 1/4-20 Screw
and (1) 1/4-20
Standard Nut
(2) 1/4-20 Screws and
(1) 1/4-20 Weld Nut
(1) 1/4-20 Screw
and (1) 1/4-20
Standard Nut
(1) 1/4-20 Screw
and (1) 1/4-20
Standard Nut
(1) 1/4-20 Screw
and (1) 1/4-20
Standard Nut
(2) 1/4-20 Screws and
(1) 1/4-20 Weld Nut
(2) 1/4-20 Screws and
(1) 1/4-20 Weld Nut
(1) 1/4-20 Screw
and (1) 1/4-20
Standard Nut
(2) 1/4-20 Screws and
(1) 1/4-20 Weld Nut
Optional /Additional
Fastening
(4) 1/4-20 Screws and
(2) 1/4-20 Weld Nuts
Optional Fastening
(4) 1/4-20 Screws and
(2) 1/4-20 Weld Nuts