Panduit Atlona AT-WAVE-101 User manual

1
Installation Guide
AT-WAVE-101
Wave Wireless Presentation Platform
AT-WAVE-101
The Atlona AT-WAVE-101 is a wireless presentation and collaboration platform designed for easy
content sharing with iOS®, Android™, Mac®, Chromebook™, and Windows® devices. The
WAVE-101 allows up to four presenters to share their content simultaneously on-screen, with an
Instructor Mode available for managing additional presenters and selecting which to be dis-
played. Wireless BYOD interfacing is simply enabled through the device’s native casting protocol
(such as AirPlay®, Google Cast™, or Miracast™), without the need to install an app. For hands-
free, eortless user operation, Dynamic Layout Mode™ is an innovative feature of the WAVE-101
that automatically adapts the on-screen layout to new incoming or disconnected source content.
The WAVE-101 is equipped with a host of other convenient features for integrators and end us-
ers, including programmable display control, display of user-uploaded images and video media,
YouTube Live streaming, support for cloud-based digital signage applications, and much more.
IMPORTANT: Visit https://atlona.com/product/at-wave-101/ for the latest rmware
updates and Installation Guide.
1 x AT-WAVE-101
1 x VESA mount
1 x USB Wi-Fi adapter
2 x Mounting screws
1 x 12V DC power supply
1 x Installation Guide
Package Contents

2
Installation Guide
AT-WAVE-101
Panel Descriptions
1 Power Button and LED
Use this button to power the unit o, it
must be held for 4 seconds to turn the unit
o. The LED will illuminate green when the
unit is on.
2 USB
Connect optional USB Wi-Fi adapter
(included) here and/or USB to RS-232
adapter (purchased separately). If needed,
the USB ports are compatible with USB
hubs for expanding the amount of USB
ports.
3 HDMI OUT
Connect to an HDMI display.
4 ETHERNET
Connect to a network switch for content,
control, and/or discovery.
5 12V DC
Connect the included 12V DC power
supply from this port to a wall outlet.
6 SD Slot
For future use.
7 Kensington Lock
Connect a Kensington lock from this port
to a table, desk, etc to avoid unwanted
removal.
USB 3.0 USB 2.0
1 2 3 4 5
6 7

3
Installation Guide
AT-WAVE-101
Mounting Instructions
The AT-WAVE-101 comes with a standard VESA mount, for mounting to displays, monitors, etc.
1. Attach the VESA mount to the mounting surface using 4 screws (not included).
2. Turn the WAVE-101 upside down and attach the two included screws to the bottom of the
unit. The screws will stick out a small amount.
USB 3.0 USB 2.0
DESIGNED IN THE US -- MANUFACTURED IN THAILAND
05
Product name: ATLONA WAVE 101
Model: AT-WAVE-101
Electrical Rating:12V 2A
MAC ADDRESS:
REV #:
Contains FCC ID: PPD-QCNFA324

4
Installation Guide
AT-WAVE-101
3. Turn the WAVE-101 so that the screws line up with the large oblong shaped holes on the
VESA mount and mount the unit to the mounting plate. The unit should slide down if fully on
the VESA mount.

5
Installation Guide
AT-WAVE-101
1. *Optional* Connect a network switch to the Ethernet port, for A/V streams, IP control, and
system conguration.
2. *Optional* Connect USB Wi-Fi adapter to one of the USB ports for connecting to an existing
wireless network (Connect mode) or creating a wireless network (Access Point mode).
3. *Optional* For RS-232 display control, connect a USB to RS-232 adapter to one of the USB
ports.
4. Connect an HDMI cable from the HDMI output port to the display.
5. Connect the included 12V DC power supply from the power port to a compatible power
outlet.
If a static IP is required, the WAVE-101 can be set to static IP mode within the Network section of
the webGUI.
If AT-WAVE-101 is unable to detect a DHCP server within 15 seconds, then the unit will use a
self-assigned IP address within the range of 169.254.xxx.xxx with a subnet of 255.255.255.0
By default, the AT-WAVE-101 is set to DHCP mode. In this mode, when the WAVE-101 is
connected to the Local Area Network (LAN), it will automatically be assigned an IP address by
the DHCP server (if available). This IP will display on the splash screen on the display or can be
scanned for on the network.
DHCP
Static
Auto
IP Modes
Connection Instructions

6
Installation Guide
AT-WAVE-101
Accessing the webGUI
The WAVE-101 includes a built-in webGUI, which allows easy remote management and control of
all features. Follow the instructions below to access the webGUI.
1. Make sure that an Ethernet cable is connected between the Ethernet port on the AT-
WAVE-101 and the network.
2. There are three ways to get to the webGUI: scan the QR code on the connected display’s
screen, type the url on the display’s screen into a web browser, or use an IP scanner to
determine the IP address of the unit. A landing page will display.
The landing page will provide quick instructions for connecting to the WAVE-101 for casting.
This page will display instructions based on the type of device connected. e.g. When a Windows
OS device is connected it will display instructions for Miracast and, if connecting to the WAVE-
101 using a Chrome browser, Chrome cast. For more information, view the manual found in the
resources tab on https://atlona.com/product/at-wave-101/.

7
Installation Guide
AT-WAVE-101
Notes

8
Installation Guide
AT-WAVE-101
Version 5
English Declaration of Conformity
The English version can be found under the resources tab at:
https://atlona.com/product/at-wave-101/.
© 2022 Atlona Inc. All rights reserved. “Atlona” and the Atlona logo are registered trademarks of Atlona Inc. All other brand names and trademarks or registered
trademarks are the property of their respective owners. Pricing, specications and availability subject to change without notice. Actual products, product images,
and online product images may vary from images shown here.
US International
atlona.com •408.962.0515 •41.43.508.4321
25279-R5
Warranty
Chinese Declaration of Conformity 中国RoHS合格声明
To view the product warranty, use the following link or QR code:
https://atlona.com/warranty/.
由SKU列出於:
https://atlona.com/about-us/china-rohs/.