Panduit Atlona AT-WAVE-101 User manual

Atlona Manuals
Presentation
AT-WAVE-101
Wireless Presentation
WAVE
Platform

AT-WAVE-101 2
Version Release Date Notes
1 Aug 2021 Release
2 Sept 2021 Updated for firmware release 1.0.1 - added Miracast PIN support
Version Information

AT-WAVE-101 3
Thank you for purchasing this Atlona product. We hope you enjoy it and will take a extra few moments to register
your new purchase.
Registration only takes a few minutes and protects this product against theft or loss. In addition, you will receive
notications of product updates and rmware. Atlona product registration is voluntary and failure to register will not
aect the product warranty.
To register your product, go to https://atlona.com/registration
Sales, Marketing, and Customer Support
Welcome to Atlona!
Operating Notes
IMPORTANT: Visit https://atlona.com/product/at-wave-101 for the latest rmware updates and User
Manual.
Main Oce
Atlona Incorporated
70 Daggett Drive
San Jose, CA 95134
United States
Oce: +1.877.536.3976 (US Toll-free)
Oce: +1.408.962.0515 (US/International)
Sales and Customer Service Hours
Monday - Friday: 6:00 a.m. - 4:30 p.m. (PST)
https://atlona.com/
International Headquarters
Atlona International AG
Tdistrasse 18
8002 Zrich
Switzerland
Oce: [phone]
Sales and Customer Service Hours
Monday - Friday: 09:00 - 17:00 (UTC +1)

AT-WAVE-101 4
Atlona, Inc. (“Atlona”) Limited Product Warranty
Coverage
Atlona warrants its products will substantially perform to their published specications and will be free from defects
in materials and workmanship under normal use, conditions and service.
Under its Limited Product Warranty, Atlona, at its sole discretion, will either:
• repair or facilitate the repair of defective products within a reasonable period of time, restore products to their
proper operating condition and return defective products free of any charge for necessary parts, labor and
shipping.
OR
• replace and return, free of charge, any defective products with direct replacement or with similar products
deemed by Atlona to perform substantially the same function as the original products.
OR
• refund the pro-rated value based on the remaining term of the warranty period, not to exceed MSRP, in cases
where products are beyond repair and/or no direct or substantially similar replacement products exist.
Repair, replacement or refund of Atlona products is the purchaser’s exclusive remedy and Atlona liability does not
extend to any other damages, incidental, consequential or otherwise.
This Limited Product Warranty extends to the original end-user purchaser of Atlona products and is non-transferrable
to any subsequent purchaser(s) or owner(s) of these products.
Coverage Periods
Atlona Limited Product Warranty Period begins on the date of purchase by the end-purchaser. The date contained on
the end-purchaser ‘s sales or delivery receipt is the proof purchase date.
Limited Product Warranty Terms – New Products
• 10 years from proof of purchase date for hardware/electronics products purchased on or after June 1, 2013.
Exclusions:
- HDVS-CAM Series: PTZ motor is covered for 3 years; hardware, electronic circuit and optics are covered for
10 years
- VTP and VSP Series: 2-year limited product warranty
- Data cable (USB-C) and Wi-Fi antenna covered by 1 year warranty.
- WAVE-101: 3-year limited product warranty
• 3 years from proof of purchase date for hardware/electronics products purchased before June 1, 2013.
• Lifetime Limited Product Warranty for all cable products.
Limited Product Warranty Terms – Refurbished (B-Stock) Products and Discontinued Products
• 3 years from proof of purchase date for all Refurbished (B-Stock) and Discontinued hardware and electronic
products purchased on or after June 1, 2013.
Remedy
Atlona recommends that end-purchasers contact their authorized Atlona dealer or reseller from whom they
purchased their products. Atlona can also be contacted directly. Visit www.atlona.com for Atlona’s contact
information and hours of operation. Atlona requires that a dated sales or delivery receipt from an authorized dealer,
reseller or end-purchaser is provided before Atlona extends its warranty services. Additionally, a return merchandise
authorization (RMA) and/or case number, is required to be obtained from Atlona in advance of returns.
Atlona requires that products returned are properly packed, preferably in the original carton, for shipping. Cartons not
bearing a return authorization or case number will be refused. Atlona, at its sole discretion, reserves the right to reject
any products received without advanced authorization. Authorizations can be requested by calling 1-877-536-3976
(US toll free) or 1-408-962-0515 (US/international) or via Atlona’s website at www.atlona.com.

AT-WAVE-101 5
Exclusions
This Limited Product Warranty excludes:
• Damage, deterioration or malfunction caused by any alteration, modication, improper use, neglect, improper
packaging or shipping (such claims must be presented to the carrier), lightning, power surges, or other acts of
nature.
• Damage, deterioration or malfunction resulting from the installation or removal of this product from any
installation, any unauthorized tampering with this product, any repairs attempted by anyone unauthorized by
Atlona to make such repairs, or any other cause which does not relate directly to a defect in materials and/or
workmanship of this product.
• Equipment enclosures, cables, power supplies, batteries, LCD displays, and any accessories used in conjunction
with the product(s).
• Products purchased from unauthorized distributors, dealers, resellers, auction websites and similar unauthorized
channels of distribution.
Disclaimers
This Limited Product Warranty does not imply that the electronic components contained within Atlona’s products
will not become obsolete nor does it imply Atlona products or their electronic components will remain compatible
with any other current product, technology or any future products or technologies in which Atlona’s products may
be used in conjunction with. Atlona, at its sole discretion, reserves the right not to extend its warranty oering in
instances arising outside its normal course of business including, but not limited to, damage inicted to its products
from acts of god.
Limitation on Liability
The maximum liability of Atlona under this limited product warranty shall not exceed the original Atlona MSRP for
its products. To the maximum extent permitted by law, Atlona is not responsible for the direct, special, incidental or
consequential damages resulting from any breach of warranty or condition, or under any other legal theory. Some
countries, districts or states do not allow the exclusion or limitation of relief, special, incidental, consequential or
indirect damages, or the limitation of liability to specied amounts, so the above limitations or exclusions may not
apply to you.
Exclusive Remedy
To the maximum extent permitted by law, this limited product warranty and the remedies set forth above are
exclusive and in lieu of all other warranties, remedies and conditions, whether oral or written, express or implied.
To the maximum extent permitted by law, Atlona specically disclaims all implied warranties, including, without
limitation, warranties of merchantability and tness for a particular purpose. If Atlona cannot lawfully disclaim
or exclude implied warranties under applicable law, then all implied warranties covering its products including
warranties of merchantability and tness for a particular purpose, shall provide to its products under applicable law.
If any product to which this limited warranty applies is a “Consumer Product” under the Magnuson-Moss Warranty
Act (15 U.S.C.A. §2301, ET SEQ.) or other applicable law, the foregoing disclaimer of implied warranties shall not
apply, and all implied warranties on its products, including warranties of merchantability and tness for the particular
purpose, shall apply as provided under applicable law.
Other Conditions
Atlona’s Limited Product Warranty oering gives legal rights, and other rights may apply and vary from country to
country or state to state. This limited warranty is void if (i) the label bearing the serial number of products have been
removed or defaced, (ii) products are not purchased from an authorized Atlona dealer or reseller. A comprehensive
list of Atlona’s authorized distributors, dealers and resellers can be found at www.atlona.com.
Atlona, Inc. (“Atlona”) Limited Product Warranty

AT-WAVE-101 6
FCC Compliance
Copyright, Trademark, and Registration
FCC Compliance and Advisory Statement: This hardware device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received including interference that
may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause
harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user
is encouraged to try to correct the interference by one or more of the following measures: 1) reorient or relocate the receiving antenna; 2) increase
the separation between the equipment and the receiver; 3) connect the equipment to an outlet on a circuit dierent from that to which the receiver
is connected; 4) consult the dealer or an experienced radio/TV technician for help. Any changes or modications not expressly approved by the
party responsible for compliance could void the user’s authority to operate the equipment. Where shielded interface cables have been provided
with the product or specied additional components or accessories elsewhere dened to be used with the installation of the product, they must be
used in order to ensure compliance with FCC regulations.
© 2021 Atlona Inc. All rights reserved. “Atlona” and the Atlona logo are registered trademarks of Atlona Inc. Pricing, specications and availability
subject to change without notice. Actual products, product images, and online product images may vary from images shown here.
The terms HDMI, HDMI High-Denition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of
HDMI licensing Administrator, Inc.
All other trademark(s), copyright(s), and registered technologies mentioned in this document are the properties of their respective owner(s).
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this product near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install or place this product near any heat
sources such as radiators, heat registers, stoves, or
other apparatus (including ampliers) that produce
heat.
9. Do not defeat the safety purpose of a polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
product.
11. Only use attachments/accessories specied by
Atlona.
12. To reduce the risk of electric shock and/or damage
to this product, never handle or touch this unit or
power cord if your hands are wet or damp. Do not
expose this product to rain or moisture.
13. Unplug this product during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualied service personnel.
Servicing is required when the product has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the product, the product has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
CAUTION: TO REDUCT THE RISK OF
ELECTRIC SHOCK
DO NOT OPEN ENCLOSURE OR EXPOSE
TO RAIN OR MOISTURE.
NO USER-SERVICEABLE PARTS
INSIDE REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance instructions in the literature
accompanying the product.
The information bubble is intended to alert the user to helpful or optional opera-
tional instructions in the literature accompanying the product.
Important Safety Information

AT-WAVE-101 7
Introduction 8
Features 8
Package Contents 8
Panel Description 9
Installation 10
Mounting Instructions 10
Connection Instructions 11
IP Modes 11
DHCP 11
Static 11
Auto 11
Connection Diagram 12
Casting 13
Miracast™ 13
Method 1 13
Method 2 13
Google Cast™ 14
Chrome 14
Android 15
AirPlay® 17
OS X Devices 17
iOS Devices 17
Control 18
Unit 18
Websocket 18
WebGUI 18
Display 18
RS-232 18
TCP Proxy 18
IP 18
WebGUI 19
Settings 20
System 20
Network 23
Display 25
Welcome Screen 27
Time 28
Log 29
Instructor 30
Appendix 33
Specications 33
Table of Contents

AT-WAVE-101 8
The Atlona AT-WAVE-101 is a wireless presentation and collaboration platform designed for easy content sharing
with iOS®, Android™, Mac®, Chromebook™, and Windows®devices. The WAVE-101 allows up to four presenters to
share their content simultaneously on-screen, with an Instructor Mode available for managing additional presenters
and selecting which to be displayed. Wireless BYOD interfacing is simply enabled through the device’s native casting
protocol (such as AirPlay®, Google Cast™, or Miracast™), without the need to install an app. For hands-free, eortless
user operation, Dynamic Layout Mode™is an innovative feature of the WAVE-101 that automatically adapts the
on-screen layout to new incoming or disconnected source content. The WAVE-101 is equipped with a host of other
convenient features for integrators and end users, including programmable display control, display of user-uploaded
images and video media, YouTube Live streaming, support for cloud-based digital signage applications, and much
more.
Introduction
Features
Package Contents
• Wireless AV platform enables simultaneous content sharing for up to four 1080p presenters.
• Wireless screen casting with iOS, Android, Mac, Chromebook, and Windows devices through native AirPlay,
Google Cast, or Miracast protocols.
• Dynamic Layout ModeTM (patent pending) automatically adapts to incoming or disconnected source content, to
optimize the way the content is presented on the screen.
• Selectable, xed static layout modes available to determine the number of visible on-screen presenters.
• Instructor Mode allows a user to manage content, adjust audio volume, upload and play media content, stream
YouTube, and switch between layouts.
• Supports YouTube Live streaming.
• Supports cloud-based digital signage platforms.
• Local storage available for playback of images and video.
• Optional Wi-Fi access point access point with built-in rewall.
• Apple® iBeacon®device discovery speeds up connectivity for iOS devices and Mac computers.
• Supports Miracast over Infrastructure for use of facility Wi-Fi or Ethernet network.
• Wireless AV interfacing can be selectively enabled or disabled for each native platform.
• Supports wireless video up to 1080p30 4:2:0 (up to 1080p60 with Miracast).
• Secure wireless and content sharing with randomly generated passwords and PIN codes (for AirPlay and
Miracast Infrastruction & P2P), and a congurable rewall.
• Supports industry-standard, network security features and protocols such as WPA2-PSK, and AES-128
encryption.
• Programmable IP, RS-232 (with optional adapter), or TCP Proxy (port 9001) display control based on time
schedules.
1 x AT-WAVE-101
1 x VESA mount
1 x USB Wi-Fi adapter
2 x Mounting screws
1 x 12V DC power supply
1 x Installation Guide

AT-WAVE-101 9
Panel Description
1 Power Button and LED
Use this button to power the unit o, it must be
held for 4 seconds to turn the unit o. The LED will
illuminate green when the unit is on.
2 USB
Connect optional USB Wi-Fi adapter (included) here
and/or USB to RS-232 adapter (purchased separately).
If needed, the USB ports are compatible with USB
hubs for expanding the amount of USB ports.
3. HDMI OUT
Connect to an HDMI display.
4. ETHERNET
Connect to a network switch for content, control,
and/or discovery.
5. 12V DC
Connect the included 12V DC power supply from this
port to a wall outlet.
6. SD Slot
For future use.
7. Kensington Lock
Connect a Kensignton lock from this port to a table,
desk, etc to avoid unwanted removal.
USB 3.0 USB 2.0
1 2 3 4 5
67

AT-WAVE-101 10
Installation
Mounting Instructions
The AT-WAVE-101 comes with a standard VESA mount, for mounting to displays, monitors, etc.
1. Attach the VESA mount to the mounting surface using 4 screws (not included).
2. Turn the WAVE-101 upside down and attach the two included screws to the bottom of the unit. The screws will
stick out a small amount.
3. Turn the WAVE-101 so that the screws line up with
the large oblong shaped holes on the VESA mount
and mount the unit to the mounting plate. The unit
should slide down if fully on the VESA mount.
USB 3.0 USB 2.0
DESIGNED IN THE US -- MANUFACTURED IN THAILAND
05
Product name: ATLONA WAVE 101
Model: AT-WAVE-101
Electrical Rating:12V 2A
MAC ADDRESS:
REV #:
Contains FCC ID: PPD-QCNFA324

AT-WAVE-101 11
Installation
Connection Instructions
IP Modes
1. *Optional* Connect a network switch to the Ethernet port, for A/V streams, IP control, and system conguration.
2. *Optional* Connect USB Wi-Fi adapter to one of the USB ports for connecting to an existing wireless network
(Connect mode) or creating a wireless network (Access Point mode).
3. *Optional* For RS-232 display control, connect a USB to RS-232 adapter to one of the USB ports.
4. Connect an HDMI cable from the HDMI output port to the display.
5. Connect the included 12V DC power supply from the power port to a compatible power outlet.
If a static IP is required, the WAVE-101 can be set to static IP mode within the Network section of the webGUI.
If AT-WAVE-101 is unable to detect a DHCP server within 15 seconds, then the unit will use a self-assigned IP
address within the range of 169.254.xxx.xxx with a subnet of 255.255.255.0
By default, the AT-WAVE-101 is set to DHCP mode. In this mode, when the WAVE-101 is connected to the Local Area
Network (LAN), it will automatically be assigned an IP address by the DHCP server (if available). This IP will display
on the splash screen on the display or can be scanned for on the network.
DHCP
Static
Auto

AT-WAVE-101 12
Installation
Connection Diagram
Laptop
Tablet
Smartphone
AT-WAVE-101
USB 3.0 USB 2.0
Laptop
Display
HDMI

AT-WAVE-101 13
Casting
The AT-WAVE-101 has the ability to connect to devices on the network or through a wireless access point. Windows,
Chrome OS, Android, iOS, and macOS can all cast through the WAVE-101 to the connected display.
To disconnect, simply press the disconnect button in the top
center of the screen.
To disconnect, simply press the disconnect button in the top center of the screen.
Miracast™
Miracast provides a way to wirelessly transmit content from Windows laptops and some android devices to displays.
Displaying Miracast devices can be set up in more than one way. Two methods are discussed below. The rst
method is the most direct method.
1. Press + keys, simultaneously.
2. The list of available devices will be displayed on the right-hand
side of the screen. Select the WAVE-101 hostname from the list.
1. Right-click on the Windows Desktop and select
Display Settings from the pop-up menu. A
new window will appear
2. Scroll down on the Display window until
reaching the section header Multiple displays.
3. Select the Connect to a wireless display link.
4. A new selection menu will open on the left side
of the screen. Select the wave-xxxx device
from the list.
K
Method 1
Method 2
NOTE: Miracast has two casting types, Peer-to-Peer (P2P) and Miracast over Infrastructure (MICE). P2P
transmits over its own created wireless access point, while Miracast over Infrastructure (recommended) uses
the current network to connect to devices. Only one P2P connection can be open at one time. If WAVE-101
is connected to a P2P connection, it will not be discoverable to other devices. Miracast over Infrastructure
can have multiple connections.

AT-WAVE-101 14
Casting
Google Cast™
1. Make sure both the WAVE-101 and the device running the chrome browser are on the same network.
2. Launch Google Chrome.
3. Locate and select the triple dot icon in the upper right corner of the browser.
4. Click the Cast... option from the drop-down menu. A new pop up will appear.
5. Select the WAVE from the Cast tab. A blue screen icon will appear on the tab while casting.
To stop casting, select WAVE from the Cast Tab again.
Google Cast provides a way to send content from Google Chrome browsers and/or Android devices to the display
wirelessly.
Chrome
NOTE: By default, the browser will cast the current tab. By selecting the Sources menu, the desktop can be
set as the cast source.

AT-WAVE-101 15
Casting
1. Open Settings on the android device. This can be found either in the App Drawer, on the home screen if the
settings app has been added there, or in the top menu that can be accessed by swiping down.
Most Android devices have the ability to use Google Cast. The rst time for casting will have dierent steps than
future casting.
Android
2. Select Connected devices from the menu.
3. Select Connection preference from the new screen.
4. Select Cast from the menu.
5. A list of compatible devices will appear. Select wave-xxxx from the list. A pop up will appear.

AT-WAVE-101 16
Casting
6. Press the Start now button. Once the unit is casting it will show connected on the Cast screen.
To disconnect, select wave-
xxxx from the cast menu, a
pop up will appear. Select
Disconnect and it will stop
casting from the android
device.
After the rst casting, an icon will appear in the top menu for quick and easy casting.
Select Screen Cast and press Disconnect on the pop up to end casting.
1. Swipe down from the top of the screen on the Android
device. Quick settings will open.
2. *Optional* Swipe left (if not in the rst page of quick
settings) to go to more quick launch icons. A Screen
Cast icon should display.
3. Select Screen Cast. A pop up
will appear.
4. Select wave-xxxx from the cast
device menu.
5. Select Start now. The Screen
Cast icon will turn blue when
casting.

AT-WAVE-101 17
AirPlay®
AirPlay® is only supported on Mountain Lion 10.8 or later. To determine if AirPlay is supported on the system being
used, click System Preferences > Displays. If the “Show mirroring options in the menu bar when available”
checkbox is not displayed, then AirPlay is not supported.
1. Make sure both the WAVE-101 and the AirPlay device are on the same network.
2. Select either Mirror or Use as Separate Display (extending) to cast over AirPlay.
OS X Devices
Casting
• Mirroring
Click the AirPlay icon in the menu bar and select the desired content to be mirrored.
• Extending
Click the AirPlay icon and select Use As Separate Display from the menu, to extend the desktop to another
display.
To turn o AirPlay, select the AirPlay icon and press Turn AirPlay O.
To turn o AirPlay, select the Stop Mirroring button.
iOS Devices
1. Make sure both the WAVE-101 and the iOS device are on the same network.
AirPlay is only supported on iOS 10 or higher.
iOS 11.0.3 or later
2. Once connected, open the Control Center.
3. Select Screen Mirroring. A pop up will appear with a list of available AirPlay
devices.
4. Select wave-xxxx from the list of devices. A check mark will appear once WAVE-
101 is connected to the iOS device.

AT-WAVE-101 18
Control
Unit
Display
The WAVE-101 can send On/O commands to the display using an USB to RS-232 adapter (not included). This can
be set to a schedule through the webGUI Display control section or websocket (using the API found at https://atlona.
com/pdf/AT-WAVE-101_API.pdf).
The WAVE-101 can send On/O commands to the display using the display’s IP address. This can be set to a
schedule through the webGUI Display control section or websocket (using the API found at https://atlona.com/pdf/
AT-WAVE-101_API.pdf).
WAVE-101 has the ability to be controlled and to schedule on/o commands for the display.
WAVE-101 can be controlled using the built in webGUI or websocket.
The unit can be controlled using websocket. The commands can be found within the API at https://atlona.com/pdf/
AT-WAVE-101_API.pdf.
The unit has a built in web UI that will allow for unit conguration. See the WebGUI section, Settings, for more
information.
Websocket
WebGUI
RS-232
IP
TCP Proxy
This unit has the ability to translate IP data to RS-232 through ports 9001. This enables control of devices through
TCP/IP that only have RS-232 ports. The unit will take the commands sent to port 9001 and send them to the
corresponding port. A USB to RS-232 adapter (not included) will be required to use TCP Proxy.

AT-WAVE-101 19
WebGUI
The WAVE-101 includes a built-in webGUI, which allows easy remote management and control of all features. Follow
the instructions below to access the webGUI.
1. Make sure that an Ethernet cable is connected between the Ethernet port on the AT-WAVE-101 and the network.
2. There are three ways to get to the webGUI: scan the QR code on the connected display’s screen, type the url on
the display’s screen into a web browser, or use an IP scanner to determine the IP address of the unit. A landing
page will display.
The landing page will provide quick instructions for connecting to the WAVE-101 for casting. This page will display
instructions based on the type of device connected. e.g. When a Windows OS device is connected it will display
instructions for Miracast and, if connecting to the WAVE-101 using a Chrome browser, Chrome cast.
From here, there are two navigation options: Instructor page and Settings page. To congure the WAVE-101 (including
display control) select Settings. For a user based content display and control area, select Instructor. It is best to go
to the Settings rst to set up the WAVE-101 exactly as needed prior to the rst use of Instructor Mode.
NOTE: If the WAVE-101 is connected to the same network via Connect Mode and Ethernet; the WebGUI
will not be accessible.

AT-WAVE-101 20
webGUI
Settings
Settings provides a way to set things such as logins, network settings, customized home screens, and more.
System
System
Factory Reset - Select this button, if wanting a clean slate after going through and changing the settings of the
WAVE-101. A pop up will appear to verify a reset is what is needed, select FACTORY RESET link to conrm the
reset.
Reboot - When pressed, a pop up will appear to conrm the choice. Press the REBOOT button to reboot the
WAVE-101.
Room Name - Type the name of the room here. Hit the disk icon to save the name change. This will appear at
the top of the Welcome Screen.
Country - Set the country of the unit, this is especially important if using WAVE-101 as a Wi-Fi access point, so
that the until will adapt its conguration to match the region.
NOTE: Changing the country may cause the WAVE-101’s wireless access point to become disabled due
to a channel mismatch. If this occurs, a new channel will need to be selected from the Network section.
NOTE: If a PXF le has been uploaded to the WAVE-101, the reset will remove the le.