Paper Replika BOEING PT-17 STEARMAN User manual

Materials :
1. 5mm & 10mm Depron/ Polyfoam
2. 3mm Plywood
4. 3mm EVA Foam
5. 0.3mm Mica Plastic
6. 2X 80mm + 30mm foam wheel
7. 1.5 mm pushrods wire
8. 2.5 + 2 mm bicycle wheel spoke wire
9. Nylon thread
10. sewing thread
12. hot glue + CA glue + UHU glue + PVA glue
13. covering paper (oil paper)
14. spray paint can
Electronics
- 35 brushless motor 650-1250 kv
- Tested with Hobbyking 3536 650kv
- ESC 50A
- Battery Lipo 3S 2200 - Li-ion 3S 3300 mah
- 4 plastic gear 9 gram servos
- Test with Propeller : 12x8 MA
Specs :
1. Wingspan 1300mm / 51 inches
2. Flying weight : 1500 gram / 53 oz
3. Wing loading : 31.8 gram/dm2 - 10.4 oz./sq. ft.
4. Wing cube loading : 4.6
5. Wing Area : 47.2 dm2 / 732 sq.in
6. CG : 9 cm from Upper Wing LE
Designed by Julius Perdana 2020 paper-replika.com
1300mm
Model : 08/2020
Build Instructions :
1. paper-replika.com
2. youtube channel : Julius Perdana

J IN ERE
O H
JOIN ERE
H
IE
JON H RE
JOINHERE
W3
W4

JIN ERE
O H
JOIN ERE
H
I E
JON H RE
JOINHERE
W3 WING SPAR
POLYFOAM/ DEPRON 5MM
4X
JOIN ERE
H
W4
TOP UPPER WING
POLYFOAM/ DEPRON 5MM
2X MIRRORED

J I ERE
O N H
JOIN ERE
H
I E
JO N H RE
JOIN HERE
W3
JOIN HERE
W4

J I ERE
ONH
JOIN ERE
H
E
JOIN H RE
W2 AIRFOIL FORMER
POLYFOAM/ DEPRON 5MM
8X
ONR
JIHEE
W3
W4
W6
GUIDE PLANS
FOR TRACING

JOINERE
H
I E EJO N H R
IE
JO N H RE
SPAR HERE
W1
BOTTOM UPPER WING
POLYFOAM/ DEPRON 5MM
2X MIRRORED

JOIN ERE
H
I E E
JON H R
I EJO N H RE
W1

JOIN ERE
H
I E EJON H R
I E
JO N H RE
W1

JOIN ERE
H
I E
JO N H RE
E
JOIN H RE
W1
W5 UPPER WING JOINER
PLYWOOD 3MM
LANDING GEAR
FAIRING
DEPRON/
POLYFOAM 5MM
2X
G2

J I ERE
O N H
JOIN ERE
H
JOIN ERE
H
W9