Ground wire
Firing wire
Neutral wire
Step8. Insert the anchors to the holes with a rubber
hammer and fix the fixing brackets and the
decorative cover to the wall with masonry screws.
Step9. Get power line through the line pipe installed
beforehand.
Step11. Connect the wiring with junction box.
Step10. Install towel warmer on the wall and secure the fixing brackets with screws. Use allen wrench to
fasten the round decorative tube and the decorative cover.
Step4. Position the towel rail and the decorative
cover in desired location. Check for level with the
spirit level and mark four equal positions for the
brackets with a pencil.
Step5. Unscrew the decorative cover and fixing
bracket.
Step7.Drill holes in wall.
Step6. Use pencil and braket to mark a central point
on the wall.
