Paris Rhone PE-PA001 User manual
PET CAMERA
User Manual
PE-PA001
User Manual
ORIGINALITY DESIGN SMART - AND BEAUTIFUL
Pet Camera
1
What's in the box
Type C cable
Brush
Camera Power adapter
Manual
This is a new type of pet entertainment device, designed to amuse pets and
encourage them to move and play. The owner can manually press the button or
set the timing in the App to make the device put small pieces of food. Pets can
not only get food through interactive feeding, but also exercise body and
intelligence.
Not only that, but the owner can also see the real-time situations of the pets at
any time through the App, even if the owner is not at home. We hope that this
device can add fun to pets and free up the time and energy of the owners.
2
Description
Lid
Speaker
Food outlet
PTZ
• Pan: 0~355°
SD card
Power
• DC 5V/2A
Cleaning hole
• Clean up with brush
Food barrel
• Volume: 0.5L
• Distance: horizontal
19.69inch~39.37inch
• The recommended
food diameter is: 0.28
inch~0.59inch (food with
a lot of powder is not
supported as which is
easy to get stuck)
Suction cup
• Put the device on the table or the ground
and press down to expel the air in the
suction cup, so that the device will be fixed
firmly. No matter how pets play with the
device, it will not fall down.
3
Description
Microphone
Feeding & Reset
• Press to release food
• Long press to reset
Status light
• Blinking red light:
wait for net connection (slow)
connecting the network (fast)
• Solid blue light on:
camera is working correctly
• Solid red light on:
camera is malfunctional
Lens
4
Usage
1. Add food
Open the lid; add pet food into the
food barrel, and the height of the food
should not exceed the MAX line; put
back the lid.
* The capacity of food barrel is 0.5L.
* The recommended food diameter is
0.28inch to 0.59inch. Food with a lot of
powder or sticky food is not supported,
as it is easy to get stuck.
2. Release food manually
1) Power on the device
2) Short press the "Feeding" button to
release one food at a time. A serving of
food is about 1~10, and the quantity
will vary according to the size of the
food. Generally, the horizontal
projection distance of food is
19.69inch to 39.37inch
MAX
5
Usage
3. Release food on schedule
(by App)
Download the App "CloudEdge" and add
the device. Set up the feeding plan in the
APP, and then the food will be automatically
released regularly and quantitatively.
4. Clean up
Open the silicone plug of the cleaning hole,
and then use the provided small brush to
clean up.
APP
6
App Download
iPad AndroidIOS
Download App(IOS&android)
CloudEdge is available for both iOS and Android operation system. Search the
name "CloudEdge" in App Store or Google Play, or scan the QR Code to
download the App.
7
Registration
Registration process
Input a legal Email address and check the privacy agreement.
Then enter the nickname and password.
Open the App, press "Sign up now" to register.
If you already have an account, press “Log in” to log in.
Step 1
Step 2
8
Device Adding
Press "+" >> "Add Device", and select the corresponding camera icon
to add.
Step 3
Power on the device and press "Next" on App.
Step 4
9
Device Adding
Note: 1) Camera only supports 2.4GHz WiFi network.
2) The number of bits in the SSID and passwords of the router should not
exceed 24 digits.
Reset the camera and press “Next” on App.Step 5
Select the WiFi network and input the password, and press "Next".Step 6
10
When connecting, you should make sure your router, mobile and
camera are as close as possible.
Step 8
View the operation instructions of scanning, and then press “Next”.
Scan the QR code in your phone with the camera and press “Next”,
when the camera comes out "dong dong dong". And you can
complete the configuration about 30s.
Step 7
Scan the QR
code of device
Device Adding
11
Follow the on-screen instructions.Step 9
Device Adding
12
Settings
Live view & Setting
In the live view interface, press " ", and you can enter setting interfaces
and set up the device common functions.
Throw food
Rotate the PTZ to find a suitable angle, press and release the food bowl icon
on the App to throw the food once.
13
Settings
Record and play sound
In the live view interface, press "One-press Calling" to play the sound to amuse
the pet. You can also press "Sound Setting" in the live to select sound.
In the Sound Setting interface, you can press to record sounds you like.
Setting
In the live view interface, press "Regular Feeding" to set up feeding time and
times.
14
Functions
Daytime Night
Record
Using SD card or Opening the Cloud-Storage Service, to keep recording for
every moment.
Day & Night
Powerful night vision means no interruptions, even in complete darkness.
Two-way audio
You will receive a call on your device when a visitor pushes the doorbell button.
You can see, hear and speak to the visitor through the App if you answer.
Motion detection
Camera can detect movements and send you notifications and app alerts.
Pan/Tilt
Rotate your camera by dragging the image in the app or using the arrows, for
almost 360 degrees of vision.
Humanoid detection
Support to filter invalid alarms caused by mosquitoes, leaves, light changes,
etc. Generally, alarms are triggered only when human beings are detected,
which greatly improving the accuracy of motion detection.
Camera will detect the barking and send you notifications and app alerts.
Barking detection
15
FAQ
Q: Why can't the device release food?
A: Check whether the device is powered on; check whether the cleaning hole is
blocked (if it is blocked, please change the food type ); check whether the
status light is normal; check whether the timing feeding function in the APP is
turned on.
A: Check whether the network is connected. Try placing the camera close to the
router. If it’s not connected, reset the device and add it again.
Q: Why is it still in the list of devices after reseting?
A: The reset device only resets the network configuration of the camera, but
cannot change the configuration on the App, to remove the camera, it must be
deleted in the app.
Q: How can I connect the camera to a different router?
A: First remove and reset the device on the App and then configure the device
again by the App.
Q: Why doesn't the device identify the SD card?
A: It is recommended to plug in the SD after when the power is off. Confirm
whether the SD card is standard and the format is FAT32. The card cannot be
identified if the Internet is not strong enough.
Q: Why aren't I receiving notifications on my phone?
A: Please confirm that the app is running properly on the phone. Also check
that the reminder function is set on by pressing the settings icon and selecting
"Notifications On". You may also need to confirm that notifications are enabled
in your phone settings.
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that
may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsi-
ble for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
WEEE Compliance
Correct Disposal of This Product (Waste Electrical&Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that
the product and its electronic accessories should not be disposed
of with other household waste at the end of their working life.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate these items from other types of waste and recycle
them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they can take
these items for environmentally safe recycling. Business users should contact their
supplier and check the terms and conditions of the purchase contract. This product
and its electronic accessories should not be mixed with other commercial wastes for
disposal.
Warranty
• 18 Month Warranty
• Life-time Support
Note:This warranty is void if the defect is caused by
• Damage caused by force majeure.
• Accidental damage, misuse, abuse, neglect.
• Expired warranty period.
Email:
https://www.parisrhone.com/
Manufacturer: Shenzhen Aspiron Technology Company Limited
Address：3rd Floor, Yiben Building, No.1063 Chaguang Road, Xili Street,
Nanshan District, Shenzhen，Guangdong，China
Made in China
Table of contents
