Parkside PNKP 105 B1 User manual

HOT GLUE GUN / HEISSKLEBEPISTOLE /
PISTOLET À COLLE PNKP 105 B1
PISTOLET À COLLE
Traduction des instructions d’origine
HEISSKLEBEPISTOLE
Originalbetriebsanleitung
HOT GLUE GUN
Translation of the original instructions
TAVNÁ LEPÍCÍ PISTOLE
Překlad originálního provozního návodu
LIJMPISTOOL
Vertaling van de originele gebruiksaanwijzing
TAVNÁ PIŠTOĽ
Preklad originálneho návodu na obsluhu
PISTOLET DO SKLEJANIA
NA GORĄCO
Tłumaczenie oryginalnej instrukcji obsługi
PISTOLA TERMOSELLADORA
Traducción del manual de instrucciones original
LIMPISTOL
Oversættelse af den originale driftsvejledning
IAN 373493_2104

GB Translation of the original instructions Page 1
DE Originalbetriebsanleitung Seite 15
FR Traduction des instructions d’origine Page 29
NL Vertaling van de originele gebruiksaanwijzing Pagina 47
CZ Překlad originálního provozního návodu Strana 61
PL Tłumaczenie oryginalnej instrukcji obsługi Strona 75
SK Preklad originálneho návodu na obsluhu Strana 89
ES Traducción del manual de instrucciones original Página 103
DK Oversættelse af den originale driftsvejledning Side 117

PNKP 105 B1 GB│IE │ 1 ■
Contents
Introduction...................................2
Intended use..........................................2
Features .............................................3
Package contents ......................................3
Technical details.......................................3
General safety warnings for power tools
in household use...............................4
Additional safety instructions for glue guns ..................5
Original accessories/auxiliary equipment ...................6
Operation ....................................6
Maintenance and cleaning.......................7
Disposal......................................8
Disposal of the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Kompernass Handels GmbH warranty ............9
Service ......................................12
Importer ....................................12
Translation of the original Conformity
Declaration ..................................13

PNKP 105 B1
■ 2 │ GB│IE
HOT GLUE GUN PNKP 105 B1
Introduction
Congratulations on the purchase of your new appliance. You have
selected a high-quality product. The operating instructions are part of
this product. They contain important information about safety, usage
and disposal. Before using the product, please familiarise yourself
with all operating and safety instructions. Use the product only as
described and for the range of applications specified. Please also
pass these operating instructions on to any future owner.
Intended use
This appliance is specifically intended for a variety of creative hobby
applications involving the gluing of heat-sensitive materials such as
paper, flowers, cardboard, packaging, plastics, leather, ceramics,
glass and fabric. The material to be glued must be clean, dry and
free of grease. Any other usage of or modification to the appliance
is deemed to be improper and carries a significant risk of accidents.
The manufacturer accepts no responsibility for damage(s) attribut-
able to misuse. The appliance is not intended for commercial use.

PNKP 105 B1 GB│IE │ 3 ■
Features
1Feeder shaft
2Power cable
3Trigger
4Stand
5Nozzle
6Thermal protection for nozzle
7Glue sticks
Package contents
1 hot glue gun PNKP 105 B1
1 stand
6 glue sticks
1 set of operating instructions
Technical details
Rated voltage 230V ∼, 50Hz (AC)
Rated power consumption 5 W (20 W in operation)
Operating temperature 105–140°C
Heating-up time approx. 5 min.
Protection class II/ (double insulation)
For glue sticks Ø 7 mm e.g. PARKSIDE PNKPZ 3 B2

PNKP 105 B1
■ 4 │ GB│IE
General safety warnings for power tools
in household use
ATTENTION!
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
■ This appliance may be used by children aged
8years and above and by persons with limited
physical, sensory or mental capabilities or lack
of experience and knowledge, provided that
they are under supervision or have been told
how to use the appliance safely and are aware
of the potential risks. Do not allow children to use
the appliance as a plaything. Cleaning and user
maintenance tasks may not be carried out by
children unless they are supervised.
■ To avoid potential risks, damaged mains cables
should be replaced by the manufacturer, their
customer service department or a similarly quali-
fied person.

PNKP 105 B1 GB│IE │ 5 ■
Additional safety instructions for glue guns
■ Children should be supervised to ensure that they do not play
with the appliance.
■ ATTENTION! This appliance must be placed on its stand 4
when not in use.
■ Always protect the appliance from rain and moisture. Water
entering a power tool will increase the risk of electric shock.
■ Do not misuse the power cord, e.g. to carry or hang up the
appliance, or to pull the plug from the socket. Keep cord away
from heat, oil, sharp edges or moving parts.
If the power cord is damaged or severed during work, do not
touch the cord but rather pull out the plug. Damaged or entan-
gled cords increase the risk of electric shock.
■ Only for indoor use.
■ If you take a break of longer than 30 minutes, pull out the power
plug.
■ Allow the appliance to cool completely after use and before
storage.
■ Do not work on any material containing asbestos.
■ Avoid the risk of injury or fire as well as health risks: RISK OF
BURNS! The adhesive and the nozzle reach a temperature of
around 105°C. Do not touch the nozzle or the glue. Do not
allow hot glue to come into contact with people or animals. In
case of contact with skin, rinse the affected part in cold running
water for a few minutes. Do not attempt to remove the adhesive
from the skin.
■ Always route the power cable towards the rear, away from the
appliance.

PNKP 105 B1
■ 6 │ GB│IE
Original accessories/auxiliary equipment
♦ Only use the accessories and additional equipment that are
specified in the operating instructions and compatible with the
appliance.
Operation
Preparing the surfaces to be glued
■ Do not use flammable solvents to clean the surfaces to be glued.
■ The ambient temperature and the materials to be bonded may
not be colder than 5°C and not warmer than 50°C.
■ The area to be glued must be clean, dry and free of grease.
♦ Smooth surfaces should be roughened before gluing.
♦ Quick-cooling materials such as steel should be warmed a little
tofacilitate adhesion.
1. Fold out the stand 4. Put down the appliance.
2. Push a glue stick 7into the feeder shaft 1.
3. Allow the appliance heat up for about 5 minutes.
The appliance is now ready for use.

PNKP 105 B1 GB│IE │ 7 ■
Preparing the surfaces to be glued
♦ Pull the trigger 3to regulate the flow of glue in accordance with
your requirements.
1. Apply the glue in spots. For flexible materials, such as textiles,
apply the glue in zigzag lines.
2. Press the two workpieces to be bonded together immediately
after applying the glue and hold for about 30 seconds. The
glued bond is ready after about 5 minutes.
3. During breaks in work, put the glue gun down on the stand4.
Switching the appliance off
♦ Unplug the appliance from the mains socket.
140
The nozzle 5reaches a temperature of over 140°C.
Maintenance and cleaning
WARNING! Always remove the power plug from the
power socket before cleaning the appliance!
■ The low-temperature glue gun is maintenance-free.
■ Keep the appliance clean and dry at all times.
■ Never permit liquids to enter inside the appliance. Use a cloth to
clean the housing. Never use petrol, solvents or cleansers which
can damage plastic.

PNKP 105 B1
■ 8 │ GB│IE
Disposal
Disposal of the appliance
The packaging is made from environmentally friendly
material and can be disposed of at your local recycling
plant.
Do not dispose of power tools in your normal
household waste!
European Directive 2012/19/EU requires that worn-out
power tools be collected separately and recycled in an
environmentally compatible manner.
Your local community or municipal authorities can provide informa-
tion on how to dispose of the worn-out appliance.
Dispose of the packaging in an environmentally friendly
manner. Note the labelling on the packaging and sepa-
rate the packaging material components for disposal
ifnecessary. The packaging material is labelled with
abbreviations (a) and numbers (b) with the following
meanings: 1–7: plastics, 20–22: paper and cardboard,
80–98: composites.
Your local community or municipal authorities can
provide information on how to dispose of the worn-out
product.
The product is recyclable, subject to extended producer
responsibility and is collected separately.

PNKP 105 B1 GB│IE │ 9 ■
Kompernass Handels GmbH warranty
Dear Customer,
This appliance has a 3-year warranty valid from the date of purchase.
If this product has any faults, you, the buyer, have certain statutory
rights. Your statutory rights are not restricted in any way by the
warranty described below.
Warranty conditions
The warranty period starts on the date of purchase. Please keep your
receipt in a safe place. This will be required as proof of purchase.
If any material or manufacturing fault occurs within three years of the
date of purchase of the product, we will either repair or replace the
product for you or refund the purchase price (at our discretion). This
warranty service requires that you present the defective appliance
and the proof of purchase (receipt) within the three-year warranty
period, along with a brief written description of the fault and of
when it occurred.
If the defect is covered by the warranty, your product will either be
repaired or replaced by us. The repair or replacement of a product
does not signify the beginning of a new warranty period.
Warranty period and statutory claims for defects
The warranty period is not prolonged by repairs effected under the
warranty. This also applies to replaced and repaired components.
Any damage and defects present at the time of purchase must be
reported immediately after unpacking. Repairs carried out after
expiry of the warranty period shall be subject to a fee.

PNKP 105 B1
■ 10 │ GB│IE
Scope of the warranty
This appliance has been manufactured in accordance with strict
quality guidelines and inspected meticulously prior to delivery.
The warranty covers material faults or production faults. The
warranty does not extend to product parts subject to normal wear
and tear or to fragile parts which could be considered as consum-
able parts such as switches or parts made of glass.
The warranty does not apply if the product has been damaged,
improperly used or improperly maintained. The directions in the
operating instructions for the product regarding proper use of the
product are to be strictly followed. Uses and actions that are discour-
aged in the operating instructions or which are warned against must
be avoided.
This product is intended solely for private use and not for commercial
purposes. The warranty shall be deemed void in cases of misuse or
improper handling, use of force and modifications/ repairs which
have not been carried out by one of our authorised Service centres.
The warranty period does not apply to
■ Normal reduction of the battery capacity overtime
■ Commercial use of the product
■ Damage to or alteration of the product by the customer
■ Non-compliance with safety and maintenance instructions, oper-
ating errors
■ Damage caused by natural hazards

PNKP 105 B1 GB│IE │ 11 ■
Warranty claim procedure
To ensure quick processing of your case, please observe the
following instructions:
■ Please have the till receipt and the item number
(IAN)373493_2104 available as proof of purchase.
■ You will find the item number on the type plate on the product,
an engraving on the product, on the front page of the operating
instructions (below left) or on the sticker on the rear or bottom of
the product.
■ If functional or other defects occur, please contact the service
department listed either by telephone or by e-mail.
■ You can return a defective product to us free of charge to the
service address that will be provided to you. Ensure that you
enclose the proof of purchase (till receipt) and information about
what the defect is and when it occurred.
You can download these instructions along with
many other manuals, product videos and installation
software at www.lidl-service.com.
This QR code will take you directly to the Lidl
service page (www.lidl-service.com) where you can open your
operating instructions by entering the item number (IAN)
373493_2104.

PNKP 105 B1
■ 12 │ GB│IE
Service
Service Great Britain
Tel.: [phone]
E-Mail: kom[email protected]
Service Ireland
Tel.: [phone]
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: kom[email protected]
IAN 373493_2104
Importer
Please note that the following address is not the service address.
Please use the service address provided in the operating instructions.
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
44867 BOCHUM
GERMANY
www.kompernass.com

PNKP 105 B1 GB│IE │ 13 ■
Translation of the original Conformity
Declaration
We, KOMPERNASS HANDELS GMBH, documents officer:
Mr. Semi Uguzlu, BURGSTR. 21, 44867 BOCHUM, Germany,
hereby declare that this product complies with the following
standards, normative documents and EC directives:
EC Low Voltage Directive
(2014/35/EU)
EMC (Electromagnetic Compatibility)
(2014/30/EU)
RoHS Directive
(2011/65/EU)*
* The manufacturer bears the full responsibility for compliance with this
conformity declaration. The object of the declaration described above
complies with the requirements of the Directive 2011/65/EU of the Euro-
pean Parliament and Council of 8 June 2011 on the limitations of use of
certain dangerous substances in electrical and electronic appliances.
Applied harmonised standards
EN 60335-2-45:2002/A2:2012
EN 60335-1:2012/A2:2019
EN 62233:2008
EN 55014-1:2017
EN 55014-2:2015
EN 61000-3-2:2014
EN IEC 61000-3-2:2019
EN 61000-3-3:2013
EN 61000-3-3:2013/A1:2019
EN IEC 63000:2018

PNKP 105 B1
■ 14 │ GB│IE
Type designation of machine: Hot glue gun PNKP 105 B1
Year of manufacture: 09–2021
Serial number: IAN 373493_2104
Bochum, 19/08/2021
Semi Uguzlu
- Quality Manager -
The right to effect technical changes in the context of further
development is reserved.

PNKP 105 B1 DE│AT│CH │ 15 ■
Inhaltsverzeichnis
Einleitung....................................16
Bestimmungsgemäßer Gebrauch.........................16
Ausstattung..........................................17
Lieferumfang.........................................17
Technische Daten .....................................17
Allgemeine Sicherheitshinweise für
elektrische Geräte für den Hausgebrauch .........18
Ergänzende Sicherheitshinweise für Heißklebepistolen ........19
Originalzubehör/-zusatzgeräte ..........................20
Inbetriebnahme ..............................20
Wartung und Reinigung........................21
Entsorgung ..................................22
Gerät entsorgen ......................................22
Garantie der Kompernaß Handels GmbH .........23
Service ......................................26
Importeur ...................................26
Original-Konformitätserklärung .................27

PNKP 105 B1
■ 16 │ DE│AT│CH
HEISSKLEBEPISTOLE PNKP 105 B1
Einleitung
Wir beglückwünschen Sie zum Kauf Ihres neuen Gerätes. Sie haben
sich damit für ein hochwertiges Produkt entschieden. Die Bedienungs-
anleitung ist Teil dieses Produkts. Sie enthält wichtige Hinweise für
Sicherheit, Gebrauch und Entsorgung. Machen Sie sich vor der Be-
nutzung des Produkts mit allen Bedien- und Sicherheitshinweisen
vertraut. Benutzen Sie das Produkt nur wie beschrieben und für die
angegebenen Einsatzbereiche. Händigen Sie alle Unterlagen bei
Weitergabe des Produkts an Dritte mit aus.
Bestimmungsgemäßer Gebrauch
Das Gerät ist speziell für eine Vielzahl von kreativen Hobbyan-
wendungen zum Verkleben von hitzeempfindlichen Materalien wie
Papier, Blumen, Holz, Karton, Verpackungen, Kunststoff, Leder,
Keramik, Glas und Gewebe geeignet. Das zu klebende Material
muss sauber, trocken und fettfrei sein. Jede andere Verwendung oder
Veränderung des Gerätes gilt als nicht bestimmungsgemäß und birgt
erhebliche Unfallgefahren. Für aus bestimmungswidriger Verwen-
dung entstandene Schäden übernimmt der Hersteller keine Haftung.
Das Gerät ist nicht für den gewerblichen Einsatz bestimmt.

PNKP 105 B1 DE│AT│CH │ 17 ■
Ausstattung
1Vorschubkanal
2Netzkabel
3Vorschubbügel
4Aufstellbügel
5Düse
6Hitzeschutzmantel der Düse
7Klebestifte
Lieferumfang
1 Heissklebepistole PNKP 105 B1
1 Aufstellbügel
6 Klebestifte
1 Bedienungsanleitung
Technische Daten
Bemessungsspannung 230 V ∼, 50 Hz (Wechselstrom)
Bemessungsaufnahme 5 W (bei Inbetriebnahme 20 W)
Betriebstemperatur 105–140 °C
Aufheizzeit ca. 5 Min.
Schutzklasse II/ (Doppelisolierung)
Für Klebestifte Ø 7 mm z. B. PARKSIDE PNKPZ 3 B2