Parrot FC6100 ASPEN Mounting instructions

Use manual for Parrot ACU
1
MODEL: FC6100
Contents:
1) Purpose of this document ............................................................................................................... 2
2) Product presentation ...................................................................................................................... 3
I. Parrot FC6100 module......................................................................................................... 3
II. FC6100 environment ........................................................................................................... 3
3) Setup................................................................................................................................................ 4
4) Module configuration...................................................................................................................... 6
5) Configure your computer .............................................................................................................. 10
6) Communication between the FC6100 and your Computer via Wxhiphop ................................... 11
7) List of command ............................................................................................................................ 13
I. Bluetooth command.......................................................................................................... 13
II. Wifi command ................................................................................................................... 13

Use manual for Parrot ACU
2
1) Purpose of this document
The goal of this document is to describe the Parrot ACU setup and configuration for control the
Radiofrequency spectrum.
A first part describes the implementation and the configuration of the equipment, a second part
describes your computer configuration for connect you on the module. The third part describes the
software for control the ACU and the last part is the list of command.

Use manual for Parrot ACU
3
2) Product presentation
I. Parrot FC6100 module
Bluetooth antenna connector
(not used on ACU)
Wi-Fi antenna connector
II. FC6100 environment
The ACU is plugged to the PC with RJ45/USB adaptator
USB / RJ45 interface

Use manual for Parrot ACU
4
3) Setup
Link :
❶Touch screen ACU (with LVDS Cable)
❷USB Workbench USB/RJ45 interface TUV computer Ethernet port
1
2
1
2

Use manual for Parrot ACU
5
Power ON:
Power supply: +12Vcc
Connect Red and Yellow cables to 12VDC, Black to 0V, other not specified

Use manual for Parrot ACU
6
4) Module configuration
To connect the module to your computer please follow these instructions...
Homepage (Once the module is supplied)
Application page
Another way is to slide the menu via touch-screen interface to “Application” menu, and
then go to “setting”

Use manual for Parrot ACU
7
Setting Menu
Wireless & network setting

Use manual for Parrot ACU
8

Use manual for Parrot ACU
9
Ethernet preferences
Let uncheck both boxes (connect the Ethernet cable with the PC first)
Complete address and Netmask with the following information.
Click next next next next and OK.

Use manual for Parrot ACU
10
5) Configure your computer
You need to configure your local network on your computer :
Go to the network menu and select local
network propriety.
Double click on TCP/IPv4 menu
Use the following IP address and confirm.
Now your computer is configured.

Use manual for Parrot ACU
11
6) Communication between the FC6100 and your Computer via
Wxhiphop
Use this application for control the RF module emission.
You can find on the Parrot USB memory stick.
Configure the red item and click open.
For check if the module is connected with your computer:
When you click on “Product manufacturer” software displayed “Parrot”.
2
1
1
2

Use manual for Parrot ACU
12
For Send command:
Example:
For send a command at module you just need write your command and press enter.
The software informs you that the order has been taken into account by the module.
You can find the command for Bluetooth and Wi-Fi in the next page.
2
1
1
2

Use manual for Parrot ACU
13
7) List of command
I. Bluetooth command
Command
Description
AT*PBTESTMODE
It is possible to put the Bluetooth in a special mode allowing an external
analyzer to take control of the module and run some tests.
II. Wifi command
Command
Description
AT*SWTM=MODE, CHANNEL, DATA_RATE, POWER
MODE :
-0 : Standby
-1 : RX
-2 : TX (Data)
-3 : TX (CW)
CHANNEL :
-1 to 14
DATA_RATE :
=B mode=
-0 : 1M
-1 : 2M
-2 : 5.5M
-3 : 11M
-4 : 22M
=G mode=
-5 : 6M
-6 : 9M
-7 : 12M
-8 : 18M
-9 : 24M
-10 : 36M
-11 : 48M
-12 : 54M
-13 : 72M
POWER :
0 to 20 dBm
For example if I send: AT*SWTM=2,7,7,10 The module Wi-Fi radiated on channel 7, Tx mode with
a data rate 12M and a power equivalent 10dBm.
Note: CHANNEL, DATA_RATE and POWER must be issued if MODE is TX (2 or 3)
Note: This command is a test command; it shall not be issued in normal operation.