Patriot Lighting Horizon-WL BK User manual

P. 1
STANDARD PAGE & GUIDELINES
Title Page
Logos, allowed symbols, standard text boxes & other guidelines
Horizon 1-Light Outdoor Wall Lantern
INSTALLATION MANUAL
SKU NUMBER: 356-1197
MODEL: Horizon-WL BK
2021-11-25
Questions, problems, need help?
Call our customer service department at
1-866-839-2888, 8 a.m. - 5 p.m., EST, Monday - Friday
8 1/8”
9 5/8”
12 3/8”
6 5/8”
12 3/8”
6 3/4”
5”
1 3/8”

P. 2
PACKAGE CONTENT
Junction box
(not supplied)
Bulb (not supplied)
BB
B
AA CC
DD
EE
A
Not supplied

P. 3
PART LIST
PART # DESCRIPTION QUANTITY REPLACEMENT PART
AVAILABILITY
A Mounting plate 1
BFixture Back Plate 1
AA Twist-cap Connector 3
BB Grounding Bolt #5x5 mm 1
CC Bolt #8x25 mm 2
DD Cap Nut 2
EE Washer 2
TOOLS REQUIRED (not supplied)
Ladder Phillip Screwdriver Safety gogglesWire cutterWire stripperSlotted Screwdriver Silicone

P. 4
SAFETY INFORMATION
CAUTION
Please carefully read the following important safety information before handling or installing this light. There is a risk
of serious injury while handling this product. To minimize these risks, please note:
• Before starting the installation of this xture or the removal of a previous xture, disconnect the power by turning
o󰀨 the circuit breaker or by removing the fuse at the fuse box.
• Be careful not to damage or cut the wire insulation (covering) during xture installation. Do not permit wires to
contact any surface having a sharp edge. To do so may damage or cut the wire insulation, which could cause
serious injury or death from electric shock.
• Do not mount or place near gas or electric heaters, replace, candles or other similar sources of heat.
• If you have any doubts or questions about the installation of this xture, consult a qualied electrician.
• Do not cover the product with cloth, paper or any material not part of the product when in use.
• Read and follow all instructions that are on the product or provided with the product.
• Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list
and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
• Keep this installation manual for future reference.
NOTICE
Any modication or alteration from what is specied in this instruction manual will void any and all warranty on this
product.
PATRIOT LIGHTING® is not responsible for any damage to the unit or personal property caused by improper
installation. If you disregard instructional warnings, you will void your warranty and possibly deal with damage.
SAFETY NOTICE
PREPARATION
Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with
package contents list and diagram on previous page. If any part is missing or damaged, do not attempt to assemble,
install or operate the product. Contact customer service for further assistance at 1-866-839-2888, 8am – 5pm EST,
Monday-Friday.

P. 5
INSTALLATION
1.1. Uninstall mounting plate (A) by rotating cap nuts (DD) counterclockwise. Pass all wires through mounting plate
(A). Connect the green (ground) wire from the xture to the green (ground) wire on the mounting plate. Connect the
xture neutral (white) wire to house neutral (white) wire and the xture black (live) wire to the house black (live) wire.
Use provided twist cap connectors (AA) to make all connections.
1.2. Securely install mounting plate (A) to junction box by tightening bolts (CC).
1.3. Install the xture back plate (B) to the mounting plate (A) by inserting the bolts through the mounting plate (A)
and xture back plate (B), then use the washers (EE) and cap nuts (DD) to tighten the xture back plate (B). Ensure
that cap nuts (DD) are securely tightened.
1.4. Carefully install the bulb (not supplied) into the socket (base bulb is E26, and maximum bulb wattage is 60W).
1.5. Apply a clear silicone water sealant (not supplied) around the outside perimeter of the xture back plate (B).
Junction box
(not supplied)
Bulb (not supplied)
BB
B
AA CC
DD
EE
A
Not supplied
1.1
1.2 1.3
1.4
1.5

P. 6
MAINTENANCE AND CARE
Patriot Lighting products will remain beautiful for many years if you properly care for them.
Patriot Lighting does not recommend the use of harsh abrasive cleaners on any of its products. Harsh cleaners will
damage the nish of your product.
To Replace Bulb:
1. Disconnect the power by turning o󰀨 the circuit breaker or by removing the fuse at the fuse box.
2. Carefully unscrew the bulb from the socket counterclockwise.
3. Replace with new bulb and securely install into the socket by rotating clockwise.
This xture requires a E26 base bulb. Maximum bulb wattage is 60W.
To clean the light xture, disconnect the power by turning o󰀨 the circuit breaker or by removing the fuse at the
fuse box and wipe the light xture with a damp, non-abrasive cloth. Gentle reminder, do not use harsh or abrasive
cleaners as it will damage the nish of your product.
FIVE-YEAR LIMITED WARRANTY: If, during normal use, this PATRIOT LIGHTING® lighting xture breaks
or fails due to a defect in material and workmanship within ve (5) years from the date of original purchase,
simply bring this lighting xture with the original sales receipt back to your nearest MENARDS®retail store.
At its discretion, PATRIOT LIGHTING®agrees to have the product or any defective part(s) repaired or re-
placed with the same or similar PATRIOT LIGHTING®product or part free of charge, within the stat-
ed warranty period, when returned by the original purchaser with original sales receipt. This warranty; (1) ex-
cludes expendable parts including but not limited to light bulbs; (2) does not cover damage that has resulted
from abuse or misuse; and (3) does not cover any losses, labor, injuries to persons/property or costs, This
warranty does give you specic legal rights and you may have other rights, which vary from state to state.