Patton 2805 User manual

Patton IPLink Managed VPN Routers promote business/dual use of broadband access networks
by applying VPN encryption AND QoS/CoS traffic management to traffic flows.
QoS/CoS Profiles
Configurable burst tolerance, bandwidth guarantees plus
reduce per flow traffic jitter as required by the application.
10/100 Ethernet
Dual 10/100 Ethernet and 5 port Ethernet switch.
VPN Tunnels
Standard IPSec with AH and ESP ensures maximum
protection when traversing unsecured networks.
IP ACCESS PRODUCTS
atton’s IPLink Managed VPN Routers are a family of next genera-
tion appliances that address both the security and the traffic prior-
itization needs of enterprises. VPN routers enable the secure com-
munication of remote offices, home offices, and mobile users
across insecure IP networks such as the Internet. IPLink VPN
Routers take it one step further and integrate quality of service (QoS) to opti-
mize business traffic flows, allowing dual use (business and leisure) of broad-
band connections without impacting the quality of business communications.
IPLink VPN Routers implement a comprehensive security environment. It all
starts with IPSec. By supporting ESP as well as AH, IPLink VPN Routers
provide data integrity, authentication, anti-replay and data confidentiality to
any traffic flow. DES, 3DES, and AES provide standard encryption up to
256 bits. Firewall capabilities of the IPLink VPN Routers include Access
Control Lists (ACLs), IP address and port filtering, and protection against
Denial of Service (DoS) attacks. Likewise, PPPoE protocols include support
for PAP and CHAP authentication.
QoS features include ToS/DiffServ marking and the configuration of eight
service class tags per IEEE 802.1p/Q. With traffic scheduling and shaping,
create dedicated bandwidth guarantees, configurable burst tolerance, and
policing to include excess traffic discard. IP fragmentation is configurable to
help minimize jitter in traffic flows.
Advanced IP features include RIPv1 & RIPv2 routing and static route config-
uration. Static and dynamic NAT, NAPT, DNS resolver and relay, dynamic
DNS, and DHCP server further add to the capabilities of the IPLink VPN
Router. All IPLink VPN routers can be managed via a web browser (HTTP),
command line interface (Telnet), or an SNMP management platform.
For more information, visit us at www.patton.com.
P
IPLink Managed VPN Routers
Models 2802 & 2805
IPLink 2805
T1/E1
Configurable Security Profiles
Built-in IP address and IP port filtering, ACLs and DoS attack
detection creates a comprehensive security environment.
SNMP/HTTP Management
Easily manage the IPLink VPN Routers
via a simple web browser interface.
Strong Encryption
DES, 3DES, and AES offer standards based encryption
algorithms from 56 to 256 bits.
DNS resolver and relay, NAT/NAPT, dynamic
DNS, and DHCP server, eases integration.
Enhanced IP Services
Special Rates Available
Call for Details
Internal/external
and AC/DC power
VPN & QoS software comes standard
10/100 LAN Ethernet
switch with full-duplex and
auto MDI/MDI-X operation
10/100 Ethernet WAN
with full-duplex and auto
MDI/MDI-X operation
Front panel LEDs
show operational
status at a glance
Proven Patton design

7622 Rickenbacker Drive
Gaithersburg, MD 20879 USA
Phone [phone]
Fax [phone]
E-mail [email protected]
URL http://www.patton.com
07M2800-ENET-DS1
Meriedweg 7
CH-3172 Niederwangen
Phone [phone]
Fax [phone]
E-mail [email protected]
URL http://www.inalp.com
Specifications
WAN Ethernet port
2802 & 2805: 10/100BaseT (RJ-45 connec-
tor); auto-negotiating; half/full duplex operation
with automatic MDI/MDI-X
LAN Ethernet Ports
2802: 10/100BaseT (RJ-45 connector); auto-
negotiating; half or full duplex operation with
automatic MDI/MDI-X
2805: 4 port 10/100BaseT switch (RJ-45 connec-
tor); auto-negotiating; half/full duplex operation
with automatic MDI/MDI-X
Management
CLI via Telnet; TFTP for Software upgrade and con-
figuration upload; SNMPv1; HTTP/web browser
Protocols
IP (RFC 741), TCP (RFC 793), UDP (RFC 768),
ICMP & ICMP Redirect (RFC 792), ARP (RFC 826).
IP Router with RIPv1 (RFC 1058), RIPv2 (RFC
2453), programmable static routes. Integrated
DHCP Server (RFC 2131), DNS Relay (RFC 1631),
IEEE 802.1p VLAN Tagging, NAT/NAPT (RFC
1631/2391)
Security
IPSec including AH and ESP. DES, 3DES, and AES
encryption. Access Control Lists (ACLs). IP port
and address filtering both by source and destina-
tion. DoS Detection. Password protected system
management with a username/password for con-
sole and virtual terminal.
Power Supplies
External universal 90–260 VAC input or 48 VDC
input. (Optional Internal universal 90–260
VAC input.)
Compliance
CE Mark; Safety: UL60950-1, CSA 22.2
6095001, IEC/EN60950-1. Universal AC units
are US NRTL Listed; EMC Emissions: FCC Part
15 Class A; EN55022 Class A; EMC
Immunity: EN55024
Environment
Operating temperature: 0-40°C (32-104 °F);
Humidity: 5-80% non-condensing
Dimensions & Weight
7.3W x 1.6H x 6.1D in.
(18.5H x 4.1W x 15.5D cm)
30.5 oz./500g (models with internal power);
24.4 oz./400g (models with external power; no
power supply)
Ordering Information
2802/UI
2802/EUI
2805/UI
2805/EUI
Typical ApplicationFeatures
✔VPN tunneling secures IP network traversal.
•IPSec encryption supporting AH and ESP
provides data integrity, authentication,
anti-replay and data confidentiality.
✔256-bit encryption protects data.
•With support for DES, 3DES, and AES,
data can be encrypted using 56 to 256-
bit algorithms, right-sizing security to
resources.
✔QoS/CoS profiles
•QoS/CoS guarantees traffic priority.
•ToS/DiffServ labeling
•Eight service class tags per IEEE
802.1p/Q
•Per flow bandwidth guarantees
•Hierarchical traffic classes
•Configurable burst tolerance
•Excess traffic discard
•Configurable packet and frame frag-
mentation to minimize jitter.
IPLink VPN Routers are next-generation security appliances that address the needs of business users by integrating QoS
into a one-box solution. By including QoS, broadband connections can be put to dual-use without impacting the quality of
business data flows.