Pawleys Island CT1 User manual

DURAWOOD SUNRISE
COUNTER HEIGHT TABLE
INSTRUCTIONS
STEP 1. Insert Spreader Bars and pole support plate in place and use
(8) 3” screws to attach to leg assemblies.
ASSEMBLY
2”2”
SCREWSCREW
2”2”
SCREWSCREW
(4) NUTS
(4) FLAT WASHER
HARDWARE PACK
• TABLETOP
• TWO LEG ASSEMBLIES
• POLE SUPPORT PLATE
• FOUR SPREADERS
STAND PARTS
• ADJUSTABLE WRENCH (not included)
• STANDARD SCREW DRIVER (not included)
• DRILL (not included)
• ALLEN WRENCH (included)
• SQUARE HEAD DRILL BIT (included)
SUGGESTED TOOLS
(4) 2” FLATHEAD SCREWS
(8) 3” FLATHEAD SCREWS
(4) 3” BOLTS
SPREADER BAR
SPREADER BAR
POLE SUPPORT PLATE
FLATHEAD
SCREWS
(1) SQUARE HEAD DRILL BIT (1) ALLEN WRENCH

Congratulations on purchasing this Durawood Counter Height/High Dining Table.
QUESTIONS REGARDING THIS PRODUCT? Call our customer service team, 252-
758-0641.
RESIDENTIAL WARRANTY - This quality product includes a FULL LIFETIME
WARRANTY for RESIDENTIAL CUSTOMERS. In the unlikely event any splintering,
rotting, cracking, peeling, chipping, insect infestation or other damage should ever
occur, The Hammock Source will replace this furniture, at no charge to you. Note
that an original sales receipt must accompany any returned product, along with a
Return Authorization Number from Hammock Source customer service; call toll-
free at 252-758-0641.
CONTRACTOR WARRANTY - CONTRACTORS receive a FULL 7-YEAR
WARRANTY. Follow the same steps outlined above.
ASSEMBLY
STEP 2.Align holes in Table Legs with holes in Table Top and use (4)
3” bolts, (4) washers and (4) lock nuts to attach leg structure to table
top. Secure bolt by placing one washer, one lock washer and one nut -
in that order. Tighten all bolts.
NOTE: Do not tighten anything until all bolts are installed.
#6027 / 0417