Pawleys Island Durawood Sunrise HDT1BLK User manual

ASSEMBLY INSTRUCTIONS continue, back of page; Residential Lifetime Warranty, back of page
HARDWARE PACK
tabletop
TABLE PARTS 2 leg assemblies
STEP 1. Place Tabletop on at surface as shown.
STEP 2. Align holes in one Table Leg with holes in
Table Top. ( FIGURE 2 ) and insert Bolts. Secure bolt
by placing one washer, one lock washer and one
nut - in that order. ( FIGURE 3 ). Repeat for second
Table Leg.
ASSEMBLY INSTRUCTIONS
Congratulations on purchasing this Durawood Sunrise Counter Height Table! You’re going to love the quality, durability and simple
assembly —plus the full Residential Lifetime Warranty. QUESTIONS ABOUT THIS PRODUCT? Call our customer service team, (800) 643-
3522.
Before beginning assembly, make sure you have all parts. Note
that not all parts pictured are to scale.
Durawood Sunrise
High Dining Table
pole support
plate
2 spreaders
FIGURE 1
4 - 3" Bolts
8- 2" Flathead Screws
4 - Washers
4 - Lock Washers
4 - Nuts
1 - Allen Wrench
1 - Square Head Drill Bit SUGGESTED TOOLS (NOT PROVIDED)
•Standard Phillips Head Screwdriver
• Adjustable Wrench
• Drill
FIGURE 2
Hardware pack
weight: 5.14 oz

RESIDENTIAL WARRANTY | This quality product includes a FULL LIFETIME WARRANTY for RESIDENTIAL CUSTOMERS. In the
unlikely event any splintering, rotting, cracking, peeling, chipping, insect infestation or other damage should ever occur, The
Hammock Source will replace this furniture, at no charge to you. Note that an original sales receipt must accompany any returned
product, along with a Return Authorization Number from Hammock Source customer service; call toll-free at [phone].
CONTRACTOR WARRANTY | CONTRACTORS receive a FULL 7-YEAR WARRANTY. Follow the same steps outlined above. #6023 / 051215
FIGURE 5
STEP 3. Seed Pole Support Plate into place as shown (FIGURE 5). Secure using Screws (FIGURE 6).
STEP 4. Tighten all Screws and Bolts securely.
FIGURE 4 FIGURE 6
STEP 3. Insert Spreader Bars. (FIGURE 3) Secure using Screws (FIGURE 4).
FIGURE 3