Pawleys Island Durawood Porch Rocker User manual

ASSEMBLY INSTRUCTIONS continue, back of page; Residential Lifetime Warranty, back of page
STEP 1. Place the seat on its side, left side up and attach left arm using screws as shown. Higher end of seat base is the front of
the chair. (FIGURE 1)
STEP 2. Attach spreader bars with screws as shown. (FIGURE 2) Note: The shorter spreader is used at back of the chair.
STEP 3. Next, attach seat back and secure with screws at the top and bottom as shown (FIGURE 3)
PARTS
Durawood
Porch Rocker
SUGGESTED TOOLS (NOT PROVIDED)
• Rubber Mallet (Optional)
•Drill (Square-Head Drill Bit
provided in HARDWARE PACK)
Congratulations on purchasing this Durawood Porch Rocker! You’re going to love the quality, durability and simple assembly —plus
the full Residential Lifetime Warranty. QUESTIONS ABOUT THIS PRODUCT? Call our customer service team, [phone].
HARDWARE PACK
Before beginning assembly, make sure you have all parts.
Note that not all parts pictured are to scale.
16 - 3" Flathead Screws
1 - Square-Head Drill Bit
Hardware pack weight: 4.37 oz
FIGURE 1 FIGURE 2 FIGURE 3
Left Arm
Right Arm
Seat
Rocker Arms
Seat Back
Decorative Top Spreader
Spreader Bar
Spreader Bar

STEP 6. Secure seat
back with screws as
shown. (FIGURE 5)
STEP 8. Attach left
rocker arm back
using pilot hole as a
guide (FIGURE 7)
STEP 9. Turn chair
onto left side and
repeat for right
rocker arm. Tighten
all screws and
enjoy rocking in
your new
Durawood Porch
Rocker.
RESIDENTIAL WARRANTY | This quality product includes a FULL LIFETIME WARRANTY for RESIDENTIAL CUSTOMERS. In the unlikely
event any splintering, rotting, cracking, peeling, chipping, insect infestation or other damage should ever occur, The Hammock
Source will replace this furniture, at no charge to you. Note that an original sales receipt must accompany any returned product,
along with a Return Authorization Number from Hammock Source customer service; call toll-free at [phone].
CONTRACTOR WARRANTY | CONTRACTORS receive a FULL 7-YEAR WARRANTY. Follow the same steps outlined above.
#6059 / 071315
FIGURE 4
FIGURE 6
STEP 4. Turn chair
over and repeat
STEPS 1 and 2 for
the right side.
STEP 5. Place deco-
rative top spreader
into groves at of
chair sides, these
will be held in place
when both Chair
Sides are securely
attached. (FIGURE
4)
STEP 7. Turn chair
onto right side. At-
tach left rocker
arm front using pilot
hole as a guide.
(FIGURE 6)
FIGURE 7
FIGURE 5