Pawleys Island DuraWood Sunrise CT1BLK User manual

ASSEMBLY INSTRUCTIONS continue, back of page; Residential Lifetime Warranty, back of page
HARDWARE PACK 4 - 3" Bolts
12 - 2" Flathead Screws
4 - Washers
4 - Lock Washers
4 - Nuts
1 - Allen Wrench
1 - Square Head Drill Bit
TABLETOP
TABLE PARTS 2 LEG ASSEMBLIES
STEP 1. Place Tabletop on at surface as shown. (FIGURE 1)
STEP 2. Align holes in one Table Leg with holes in Table Top. ( FIGURE 2 ) and
insert Bolts. Secure bolt by placing one washer, one lock washer and one nut -
in that order. ( FIGURE 3 ). Repeat for second Table Leg.
ASSEMBLY INSTRUCTIONS
SUGGESTED TOOLS (NOT PROVIDED)
•Standard Phillips Head Screwdriver
• Adjustable Wrench
• Drill
Congratulations on purchasing this Durawood Sunrise Counter Height Table! You’re going to love the quality, durability and simple
assembly —plus the full Residential Lifetime Warranty. QUESTIONS ABOUT THIS PRODUCT? Call our customer service team, (800) 643-
3522.
Before beginning assembly, make sure you have all parts. Note
that not all parts pictured are to scale.
Durawood Sunrise
Counter Height Table
POLE SUPPORT
PLATE
4 SPREADERS
FIGURE 1
FIGURE 2 FIGURE 3
Hardware pack
weight: 5.8oz

STEP 3. Insert Spreader Bars closest to Table Top. (FIGURE 4) Secure using Screws (FIGURE 5).
RESIDENTIAL WARRANTY | This quality product includes a FULL LIFETIME WARRANTY for RESIDENTIAL CUSTOMERS. In the un-
likely event any splintering, rotting, cracking, peeling, chipping, insect infestation or other damage should ever occur, The Ham-
mock Source will replace this furniture, at no charge to you. Note that an original sales receipt must accompany any returned
product, along with a Return Authorization Number from Hammock Source customer service; call toll-free at [phone].
CONTRACTOR WARRANTY | CONTRACTORS receive a FULL 7-YEAR WARRANTY. Follow the same steps outlined above. #6023 / 051115
FIGURE 4
FIGURE 7
STEP 4. Insert remaining Spreader Bars (FIGURE 6) and seed Pole Support Plate into place as shown (FIGURE 7). Secure using Screws
(FIGURE 8).
STEP 5. Securely tighten all screws and bolts.
FIGURE 5
FIGURE 6 FIGURE 8