Pawleys Island DWHDSWVC1GRY User manual

DURAWOOD SWIVEL CHAIR
INSTRUCTIONS
• SWIVEL BASE & SEAT ASSEMBLY
• CHAIR BACK
• CHAIR LEFT ARM
• CHAIR RIGHT ARM
• PHILLIPS HEAD SCREWDRIVER
Hardware Pack Weight: 6.8 oz.
(12) BARREL NUTS
(12) 1.5” BARREL BOLTS
(1) ALLEN WRENCH
HARDWARE PACK
CHAIR PARTS
SUGGESTED TOOLS
STEP 1. Attach Chair Back to Swivel Base &Seat Assembly using (6)
1.5” barrel bolts and barrel nuts. Keep all barrel bolts loose until Step
3.
ASSEMBLY
CHAIR BACKCHAIR BACK
SWIVELSWIVEL
BASE & SEATBASE & SEAT
ASSEMBLYASSEMBLY
1.5” BARREL1.5” BARREL
BOLTBOLT

Congratulations on purchasing this Durawood Swivel Chair. QUESTIONS REGARDING THIS
PRODUCT? Call our customer service team, 252-758-0641.
RESIDENTIAL WARRANTY - This quality product includes a FULL LIFETIME WARRANTY
for RESIDENTIAL CUSTOMERS. In the unlikely event any splintering, rotting, cracking,
peeling, chipping, insect infestation or other damage should ever occur, The Hammock
Source will replace this furniture, at no charge to you. Note that an original sales receipt
must accompany any returned product, along with a Return Authorization Number from
Hammock Source customer service; call toll-free at 252-758-0641.
CONTRACTOR WARRANTY - CONTRACTORS receive a FULL 7-YEAR WARRANTY. Follow
the same steps outlined above.
ASSEMBLY
BARREL NUT
1.5” BARREL
BOLT
1.5” BARREL
BOLT
#6112
STEP 3. Attach arms to chair back
using (2) 1.5” barrel bolts and barrel
nuts. Tighten all bolts.
STEP 4. Assembly finished, enjoy!
STEP 2. Use (4) 1.5” barrel bolts
and barrel nuts to attach The
left and right arm assemblies to
the seat base. Keep bolts loose
until step 3.
RIGHT
ARM
LEFT
ARM