PCE Health and Fitness PCE-GM 75 User manual

© PCE Instruments
PCE-GM 75 Gloss Meter
User Manual
User manuals in various languages (français,
italiano, español, português, nederlands, türk, polski,
русский, 中文) can be found by using our
product search on: www.pce-instruments.com
Last change: 2 December 2019
v1.0
English

© PCE Instruments
Contents
1Safety notes........................................................................................... 1
2Applications........................................................................................... 2
3Instrument Characteristics ..................................................................2
4Specifications........................................................................................2
5Display descriptions............................................................................. 2
6Operation instructions ......................................................................... 3
7Menu instructions ................................................................................. 3
8Modifying the calibration value ...........................................................3
9Setting the time ..................................................................................... 4
10 Important notice.................................................................................... 4
11 Warranty.................................................................................................4
12 Disposal ................................................................................................. 4

© PCE Instruments
1
1 Safety notes
Please read this manual carefully and completely before you use the device for the first time. The
device may only be used by qualified personnel and repaired by PCE Instruments personnel.
Damage or injuries caused by non-observance of the manual are excluded from our liability and
not covered by our warranty.
•The device must only be used as described inthis instructionmanual. If usedotherwise,
this can cause dangerous situations for the user and damage to the meter.
•The instrument may only be used if the environmental conditions (temperature, relative
humidity, …) are within the ranges stated in the technical specifications. Do not expose
the device to extreme temperatures, direct sunlight, extreme humidity or moisture.
•Do not expose the device to shocks or strong vibrations.
•The case should only be opened by qualified PCE Instruments personnel.
•Never use the instrument when your hands are wet.
•You must not make any technical changes to the device.
•The appliance should only be cleaned with a damp cloth. Use only pH-neutral cleaner,
no abrasives or solvents.
•The device must only be used with accessories from PCE Instruments or equivalent.
•Before each use, inspect the case for visible damage. If any damage is visible, do not
use the device.
•Do not use the instrument in explosive atmospheres.
•The measurement range as stated in the specifications must not be exceeded under
any circumstances.
•Non-observance of the safety notes can cause damage to the device and injuries to
the user.
We do not assume liability for printing errors or any other mistakes in this manual.
We expressly point to our general guarantee terms which can be found in our general terms of
business.
If you have any questions please contact PCE Instruments. The contact details can be found at
the end of this manual.

© PCE Instruments
2
2 Applications
•For the measurement of surface gloss for printing ink, paint, bakedlacquer, coating and
wood
•For the measurement of surface gloss for construction decoration materials such as:
marble; granite; glass; chemically polished or pottery brick
•For the measurement of surface gloss for plastic and plastic sheets
•For the measurement of surface gloss for other non-metal materials
3 Instrument Characteristics
•Fine, light, stylish appearance and easy to carry
•Completely intelligenised design, single key operation, convenient to use
•Automatically adjustable
•Capable of measuring from multiple different angles
•Long lifespan lamp
•High measurement precision
•Backlit LCD digital display with accurate battery life and time display
•Auditory feedback during operation
•Automatic shutdown
•USB interface for PC connection
•Stores up to 1245 measurements
4 Specifications
Measuring range
0 ... 99.9 GU
100 ... 1000 GU
Resolution
0.1 GU
1 GU
Repeatability
< 0.45 GU
0.5%
Accuracy
< 1 GU
1%
Measurement geometry
60°
Measuring surface
Ø4.5 mm
Data storage
1,245 measured values
Interface
Micro USB
Power supply
2 x 1.5V AAA batteries
Environmental conditions
0 ... 40°C / 32 ... 313°F, < 85% rh non-condensing
Dimensions
115 x 65 x 25 mm / 4.5 x 2.6 x 1 in
Weight
100 g / < 1 lb
Standards
GB9754-88, GB9966.5, ISO2813, JJG696-2002
5 Display descriptions
•“GU” - Gloss Unit
•“calibrate” –Runs the calibration process
•“clear save”- Clears the saved measurements
•“Change CAL” - Modifies the calibration value
•”Set time”–Modifies the time display

© PCE Instruments
3
6 Operation instructions
Press the button to start the device. The display will now show “Calibrate?” Place the device, with
the measurement window into the calibration slot, in the case of the device and press the button
again to confirm the calibration process. The device now calibrates automatically. Once
calibrated, the display shows “calibrate ok” and then “ready”. The device is now in the working
condition and is ready for use.
(If you choose the skip the calibration process, simply wait ~20 sec. until the display shows
“ready”.)
Now place the device with the measurement window onto the surface you wish to measure and
press the button to begin. With a “beep” the device displays the gloss value of the measured
surface.
The device will shut down automatically after ~50 sec. of not being used.
7 Menu instructions
When the device is ready for use, press and hold the button until the display changes and
“SET/MENU” is highlighted. Release the button to enter the next screen. The display change
looks as follows:
The cursor now cycles (top to bottom) the options of the next menu. Press the button when the
desired option is highlighted in order to select:
8 Modifying the calibration value
If you wish to replace the standard plate (black quartz crystal plate), you must then change the
calibration value. In order to do this, you must press the button when “change CAL” is highlighted
inside the “SET/MENU” screen (refer to picture above). The display now shows “change CAL?”
Press the button again to confirm and begin the process (if no new value is needed, do not press
the button, after ~20 sec. the device will return to the screen displaying “ready”). The device now
begins to count up from 80. Press the button at the desired value to confirm it. The device will
now return to the working condition and display “ready”.

© PCE Instruments
4
9 Setting the time
If you wish to change the time displayed on the device, press the button when “set time” is
highlighted inside the “SET/MENU” screen (refer to picture in point 7 Menu Instructions). The
highlighted area (beginning with the year) now begins to count up, press the button again to
confirm the desired value. After confirmation, the next value will be highlighted and begin to count
up (month). Repeat the process until you have the desired date and time set.
10 Important notice
•Avoid direct sunlight; otherwise it can affect the measurement accuracy.
•The standard plate should be kept clean. Avoid touching it with your fingers. If there is
dust on the plate, it can affect the measurement accuracy. Wipe it with the provided
cloth or absolute alcohol.
•When the battery level is less than 20%, the batteries need to be replaced. Open the
battery cover and replace the old batteries with new ones. Please note the polarity of
the contact wires.
•The batteries should be replaced when depleted, otherwise long-term storage may
cause liquid to leak out and damage the device. If the device will not be used for a
longer period of time, the batteries should be taken out and kept in a safe place.
11 Warranty
You can read our warranty terms in our General Business Terms which you can find here:
https://www.pce-instruments.com/english/terms.
12 Disposal
For the disposal of batteries in the EU, the 2006/66/EC directive of the European Parliament
applies. Due to the contained pollutants, batteries must not be disposed of as household waste.
They must be given to collection points designed for that purpose.
In order to comply with the EU directive 2012/19/EU we take our devices back. We either re-use
them or give them to a recycling company which disposes of the devices in line with law.
For countries outside the EU, batteries and devices should be disposed of in accordance with
your local waste regulations.
If you have any questions, please contact PCE Instruments.

© PCE Instruments
5
PCE Instruments contact information
Germany France Spain
PCE Deutschland GmbH PCE Instruments France EURL PCE Ibérica S.L.
Im Langel 4 23, rue de Strasbourg Calle Mayor, 53
D-59872 Meschede 67250 Soultz-Sous-Forets 02500 Tobarra (Albacete)
Deutschland France España
Tel.: [phone] Téléphone: [phone] Tel. : [phone]
Fax: [phone] Numéro de fax: [phone] Fax: [phone]
[email protected] [email protected] [email protected]
www.pce-instruments.com/deutsch www.pce-instruments.com/french www.pce-instruments.com/espanol
Germany United Kingdom Italy
PCE Produktions- und PCE Instruments UK Ltd PCE Italia s.r.l.
Entwicklungsgesellschaft mbH Unit 11 Southpoint Business Park Via Pesciatina 878 / B-Interno 6
Im Langel 26 Ensign Way, Southampton 55010 Loc. Gragnano
D-59872 Meschede Hampshire Capannori (Lucca)
Deutschland United Kingdom, SO31 4RF Italia
Tel.: [phone] Tel: [phone] Telefono: [phone]
Fax: [phone] 9971 Fax: [phone] Fax: [phone]
[email protected] [email protected] [email protected]
www.pce-instruments.com/deutsch www.pce-instruments.com/english www.pce-instruments.com/italiano
The Netherlands China Hong Kong
PCE Brookhuis B.V. PCE (Beijing) Technology Co., Limited PCE Instruments HK Ltd.
Institutenweg 15 1519 Room, 6 Building Unit J, 21/F., COS Centre
7521 PH Enschede Zhong Ang Times Plaza 56 Tsun Yip Street
Nederland No. 9 Mentougou Road, Tou Gou District Kwun Tong
Telefoon: [phone] 102300 Beijing, China Kowloon, Hong Kong
[email protected] Tel: [phone] Tel: [phone]
www.pce-instruments.com/dutch [email protected] [email protected]
www.pce-instruments.cn www.pce-instruments.cn
United States of America Turkey
PCE Americas Inc. PCE Teknik Cihazları Ltd.Şti.
711 Commerce Way suite 8 Halkalı Merkez Mah.
Jupiter / Palm Beach Pehlivan Sok. No.6/C
33458 FL 34303 Küçükçekmece - İstanbul
USA Türkiye
Tel: [phone] Tel: [phone]
Fax: [phone] Faks: 0212 705 53 93
[email protected] [email protected]
www.pce-instruments.com/us www.pce-instruments.com/turkish