peerless-AV CL-ENCL68 User manual

12015-02-05 #:220-9004-1
MEDIA PLAYER ENCLOSURE
MODEL:
CL-ENCL68
CL-ENCL68-EUK
User Manual
www.peerless-av.com

22015-02-05 #:220-9004-1
General Safety Precautions ...................................................................................................................3
Notice.............................................................................................................................................5
Relevant Information .....................................................................................................................5
System Installation And Electrical Requirements ..................................................................................6
Electrical Code...............................................................................................................................6
Power Source ................................................................................................................................6
Set Up Instructions.................................................................................................................................7
What's In The Box..........................................................................................................................7
Cable Entry/Exit..............................................................................................................................8
Installation Of Media Player ...........................................................................................................9
Media Player Setup........................................................................................................................9
Seal The Media Player Enclosure..................................................................................................9
Mounting The Media Player Enclosure (Optional)........................................................................10
Powering Up The Media Player Enclosure...................................................................................10
General Care Instructions ............................................................................................................10
Product Specifications .........................................................................................................................11
Warranty ..............................................................................................................................................12
CONTENTS

32015-02-05 #:220-9004-1
Read before operating equipment
Thank you for purchasing our product. Before using it, please read this user manual carefully
and follow the instructions correctly for safe operation. Please keep this manual handy for future
reference. Also, please be sure to always include this user manual in the packaging when transferring
or transporting this product to a different location.
CAUTION:
These servicing instructions are for use by qualified service personnel only. To reduce the risk of
electric shock, do not perform any servicing other than that contained in the operating instructions
unless you are qualified to do so.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
6. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
7. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, does not operate
normally, or has been dropped.
8. Only use attachments/accessories specified by the manufacturer.
9. In case of emergency such as fire or electric shock caused by the product, immediately contact
911 or proper emergency police/fire service agencies in your country.
10. Follow instructions for wall, shelf or ceiling mounting as recommended by the manufacturer.
11. Use properly rated power voltage. Use of non-rated voltage may cause fire, electric shock and
severe damages to the product.
12. Under any circumstances, do NOT modify or disassemble this product as it may cause fire,
electric shock, or severe damages to the product. Also, any unauthorized modifications made to
the product automatically void product warranty.
13. Never touch antenna lines, wires, if applicable, power cables or power plugs in such
circumstances as lightning and thunder as it may cause electric shock.
14. Any severe physical impact on the product may cause certain components to fall out of place
within and break, which may cause fire or electric shock. In such event, do not operate the
product. Contact the manufacturer for support.
15. Periodically clean dust off the power plug, to keep it clean and dry, ensuring proper and safe
operation of the product.
16. Do NOT destroy, process, or place the product close to any heating device; do NOT bend or twist
power cords, power plugs, cables, or wires with excessive force; do NOT place any heavy object
on the product as all of the above may cause damages to the product and result in fire or electric
shock.
17. Do NOT touch power plugs with wet hands.
18. Always make sure to plug in the power plug firmly and completely. Incompletely placed power
plugs may cause fire or electric shock due to built up heat emission.
19. Do NOT use any non-rated power sockets or power strips with many other devices jointly plugged
in. The wire of non-designated capacity may cause fire due to built up heat emission. Try to use a
single, directly dedicated and rated GFI power socket for the product for safe operation.
GENERAL SAFETY PRECAUTIONS

42015-02-05 #:220-9004-1
20. In case of product malfunction or unusual events such as electrical burning smell, smoke, or loss
of content signals on TV/Display due to internal overheating, immediately turn off and unplug the
power and contact the manufacturer.
21. Do NOT install the product at such unstable locations as moving objects, constantly vibrating
props, or uneven surfaces. Improper installation may cause products to fall off. Follow mounting
instructions properly for safe operation of the product.
22. Do NOT install the product near any poisonous gas or chemically unstable atmosphere as it may
cause fire.
23. Do NOT install the product near any strong magnetic or electrical current field. It may cause
fire, electric shock, or severe damages to the product. The product may not be subject to any
electromagnetic radiation, causing deterioration of content picture quality.
24. Do NOT leave any fire source, such as candles, close to or on the product as it may be a cause
for fire or damages to the product.
25. Do NOT move or transport the product with any cables (power cables, content connectivity
cables) plugged in to the source devices. Damages may occur to the cables, plugs, or jointing
connectors of the cables due to forcible bending and stress, which may cause damages to the
waterproof seal of the product, making it subject to fire, electric shock, or shorted circuit.
26. When unplugging, always grab the plugs of power cords or cables. Improper pulling of the cords
or cables may cause damages to the waterproof seal of the product, making it subject to fire,
electric shock, or shorted circuit.
27. Do NOT use any other power cords or connection cables than what is provided with the product
or from the manufacturer directly. Use of untested, unauthorized, or substituted power cords or
connection cables may be a cause for malfunction, fire, electric shock, or severe damages to the
product. Also such use of improper or undesignated power cords or connection cables will void
product warranty.
28. Always leave the Power Off when plugging or unplugging the power cords or connection cables to
avoid electric shock or damages to the product.
29. Do NOT use any chemical such as paint thinner or benzene to clean the product’s exterior. It may
cause scratches on the surface, erasing proper indications, identification labels, or instructions on
the exterior, which may be a cause for misuse and improper operation of the product.

52015-02-05 #:220-9004-1
Notice
CAUTION: Please use the power cord provided
with this product in accordance with the table. If
a power cord is not supplied with this equipment,
please contact your supplier. Only plug equipment
into receptacles with GFI.
IMPORTANT: Peerless-AV is not responsible for
any issues created by water present at the plug/
receptacle insertion point.
Relevant Information
Be sure to keep record of your products model number for future reference
Plug Type: North America European
Plug Shape:
Region: USA/Canada Europe
Voltage: AC 120V AC240V

62015-02-05 #:220-9004-1
Electrical Code
Note: To the display system installer: This reminder is provided to call attention toArticle 820-44 of
the National Electric Code that provides guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding system of the facility. Outlet shall be
installed near the equipment and shall be easily accessible.
SYSTEM INSTALLATION AND ELECTRICAL REQUIREMENTS
Note: Installation shall incorporate UL Listed external surge protection rated 2500 Vpk or less, for 150
to 300 Vac mains, installed in accordance with Article 285 of ANSI/NFPA 70 or applicable local codes.
Power Source
The product must be connected to a main socket outlet with a protective earthing connection.
The main plug is used as the disconnect device and shall remain readily accessible.
This product operates on 100-240 volts 60 Hz, AC current. Insert the power cord into a 120 volts 60
Hz outlet. Never connect the product to direct current or anything other than the specified voltage.
To prevent electric shock from the product, do not use with an extension cord, receptacle, or other
outlet unless the blades and ground terminal can be fully inserted to prevent blade exposure.
CAUTION: Double pole/neutral fusing (ISO 3869. No 5036)
Antenna discharge unit
(NEC Section 810-20)
NEC National Electric Code
Ground clamp
Electric service
equipment
Ground clamps Power service grounding
electrode system
(NEC Art 250 Part H)
Grounding conductors
(NEC Section 810-21)
Antenna lead-in wire

72015-02-05 #:220-9004-1
Important:
1. When routing cables through the cable entry make sure that the cables are formed in such a way
as to remove any stress on the connectors.
2. Installation shall be in accordance with the applicable parts of Chapter 8 of ANSI/NFPA70.
What's In The Box
Media Player Enclosure
4 M8 Screws
User Manual
SET UP INSTRUCTIONS

82015-02-05 #:220-9004-1
1. Flip the Media Player Enclosure over and
unscrew the 4 screws on the metal base
plate. Remove the metal base plate.
2. Run the cable(s) for the Media Player through
the cable entry points on the Media Player
Enclosure as shown.
Note: It is suggested to only use one of the cable
entry points.
Note: Do not run the Media Player's power cord
through the entry points. The power cord will be
installed later.
Cable Entry/Exit
3. Realign the metal base plate on the Media
Player Enclosure. Reinstall the 4 screws
into the metal base plate while making sure
the wires are fully sealed (Cables should be
completely surrounded by compressible foam
gaskets and gasket block).
Note: Ensure that the base plate is reinstalled in
the proper orientation.

92015-02-05 #:220-9004-1
Media Player Setup
1. Plug the Media Player into the power outlet inside the Media Player Enclosure.
2. Connect cables to Media Player.
Sealing The Media Player Enclosure
Note: It is recommended to plug in all electronics
to confirm power and connections are correct
and Media Player is functioning properly prior to
final closing and mounting of the Media Player
Enclosure.
Note: If mounting the Media Player Enclosure,
completely seal the Enclosure prior to mounting.
1. Realign the plastic top on the Media Player
Enclosure. Reinstall the 8 screws into the
plastic top on the Media Player Enclosure
Note: Ensure that the base plate and plastic top
are reinstalled in the proper orientation.
1. Flip the Media Player Enclosure back over
so that it is right side up. Unscrew the 8
screws on the plastic top of the Media Player
Enclosure. Remove the plastic top.
2. Peel off one sticky side of the 4 Velcro pieces
(provided). Attach the 4 Velcro pieces to the
bottom corners of the Media Player (sold
separately).
3. Place the Media Player where it will be
positioned inside the Media Player Enclosure
and make sure the Media Player will have
enough clearance for wiring.
4. Peel off the other sticky side of the Velcro and
attach the Media Player to the metal base
plate of the Media Player Enclosure. Press
firmly for a few seconds.
Installation Of Media Player
y)

10 2015-02-05 #:220-9004-1
Mounting The Media Player Enclosure (Optional)
It is best to mount the Media Player Enclosure using a display wall mount. To mount the Media
Player Enclosure use the four M8 screws (provided) to attach the mount (sold seperately) to the
Media Player Enclosure. The Media Player Enclosure mounts like a display by using the four
mounting holes on the metal base plate.
Mounting solution is not included with the unit and is sold separately. Peerless-AV provides a variety
of all-weather mounting solutions. Contact your Peerless-AV representative for all-environment
mounting solutions.
For your safety, only mount with an UL listed wall mount bracket that supports the weight of the Media
Player Enclosure and any hardware. When mounting the Media Player Enclosure outdoors or in
harsh environments, only use wall mounts that are designed to resist water, rust and wind.
15.75"
(400mm)
7.87"
(200mm)
Powering Up the Media Player Enclosure
Only plug into an electrical outlet that has a GFI receptacle. If you run an extension cord, make sure
it is an outdoor rated cord and plug. Insure that is placed safely and out of the way of people and
animals.
Plug the power cord from the Media Player Enclosure into the electrical outlet and be sure that it is
connected properly.
Power on all components to ensure proper functionality.
General Care Instructions
Keep items away from the Media Player Enclosure fans.