peerless-AV peerAir HDS-WHDI100T User manual

ISSUED: 01-09-13 SHEET #: 180-9045-1
User Manual and Installation Guide
Models:
HDS-WHDI100T
®
WIRELESS HD
MULTIMEDIA TRANSMITTER

3 of 34 ISSUED: 01-09-13 SHEET #: 180-9045-1
Contents
Safety Precautions...........................................................................................................................................4
Important Information......................................................................................................................................5
Unit Care Recommendations ..........................................................................................................................5
Introduction.......................................................................................................................................................6
Package Contents..........................................................................................................................................6
Product Overview.............................................................................................................................................7
Transmitter .....................................................................................................................................................7
Remote Control..............................................................................................................................................9
Installation.......................................................................................................................................................11
Pairing The Transmitter To An Existing Wireless HD Multimedia Kit............................................................11
Alternate Pairing Option...............................................................................................................................13
AV Device Setup...........................................................................................................................................15
IR Flasher Setup ..........................................................................................................................................15
Wall Mounting the HDS-WHDI100T (Optional) ............................................................................................16
Operation.........................................................................................................................................................17
Powering up the Multiple Transmitter System..............................................................................................17
Indicator Lights Decoded..............................................................................................................................17
Checking IR Flasher Frequency...................................................................................................................18
Changing IR Flasher Frequency ..................................................................................................................18
Toggling Between Paired Transmitters.........................................................................................................20
Toggling Between Source Inputs on a Paired Transmitter ...........................................................................20
Renaming Paired Transmitter.......................................................................................................................20
Removing a Transmitter that Has Been Paired to the Receiver ..................................................................22
Troubleshooting .............................................................................................................................................23
Appendix.........................................................................................................................................................24
Supported Resolution...................................................................................................................................24
Audio Bit Rate Support.................................................................................................................................25
Product Specifications..................................................................................................................................25
Limited Warranty ............................................................................................................................................30
Wireless HD Multimedia System Offering....................................................................................................31
Contact Information .......................................................................................................................................32

4 of 34 ISSUED: 01-09-13 SHEET #: 180-9045-1
• Power to the units must be switched off before any work is undertaken, such as anyAV device connection
or TV connection.
• To prevent electric shock, make sure to use the supplied DC adapters as power supply to the Transmitter
and Receiver.
• Be sure the power cord is routed so that it will not be stepped on or pinched by heavy items.
• Avoid overloading electrical outlets or extension cords which otherwise could result in electric shock or fire.
• Disconnect the product from the power source if it is left unattended for an extended period of time, and to
protect the product from lightning.
• To reduce the risk of electric shocks or fire, always disconnect the power cord from the power outlet when
you are not using the product for an extended period of time.
• This product should not be exposed to dripping or splashing liquids. No object filled with liquids, such as
vases, should be placed on the product.
• To avoid electric shock, never stick anything in the slots on the case or remove the cover.
• Place the product on a flat, hard and stable surface.
• Do not block the ventilation slots on the product or place any heavy object on the top cover. Blocking the
airflow could damage the product. Arrange components so that air can flow freely around the product.
Ensure that there is adequate ventilation if the product is placed in a cabinet. Put the products in a properly
ventilated area, away from direct sunlight or any source of heat.
• To reduce the risk of fire or electric shock, do not expose the product to water or moisture.
• This product is intended for indoor use only.
• This document may be modified without any notice.
Safety Precautions
WARNING!
RISK OF
ELECTRICAL
SHOCK
DO NOT OPEN
WARNING:
TO REDUCE THE RISK OF ELECTRICAL
SHOCK DO NOT REMOVE THE COVER.
NO USER-SERVICEABLE PARTS
ARE INSIDE. REFER SERVICING TO
QUALIFIED PERSONNEL

5 of 34 ISSUED: 01-09-13 SHEET #: 180-9045-1
Important Information
• Never use this product in an aircraft or a medical facility as it can cause interference or an undesirable
effect.
• The use of this product in the following locations may result in abnormal video and audio output (noise,
blocked image...etc,).
• When the product is placed near a refrigerator or metal structure.
• When the environment consists of walls made of concrete.
• A cluttered room where the wireless signals may be blocked.
• This product has been tested and manufactured to comply with each country’s safety rules. However, there
is no guarantee that interference will not occur in some installations. If interference happens, decrease the
distance between the Transmitter and Receiver (Receiver not included).
• This product may interfere with 5GHz wireless devices.
• Optimal use of this product is for in-room/multi-room applications.
• Any changes or modifications not expressly approved by the manufacturer of this device could void the
product warranty.
• This equipment must be installed and operated in accordance with the provided instructions. The
Transmitter must be installed to provide a separation distance of at least 8” (20cm) from all persons and
must not be operating near or in conjunction with any other Transmitter. End users and installers must
be provided with installation instructions and Transmitter operating conditions for satisfying RF exposure
compliance.
• This device should be used only as specified within this manual to meet RF exposure requirements. Use of
this device in a manner inconsistent with this manual could lead to excessive RF exposure conditions.
Unit Care Recommendations
To clean, use a soft, dry cloth only. Do not use water or other cleaning products as they may cause electrical
failure or damage the surface of the product.

6 of 34 ISSUED: 01-09-13 SHEET #: 180-9045-1
Introduction
The PeerAir™ Wireless HD Multimedia Transmitter expands your current Wireless HD Multimedia System to
deliver uncompressed Full HD 1080p, as well as all 3D content to your existing HDTV wirelessly from additional
source components.
Package Contents
Ensure that the following items are present in the package. If any items are missing or damaged, please call
Peerless-AV Customer Care at 1-800-865-2112. (available 7:00am - 7:00pm (CST) Monday - Friday).
Transmitter IR FlasherDC Power Adapter
Manual Quick Start
Guide
ISSUED:01-09-13 SHEET#: 180-9045-1
User Manual and Installation Guide
Models:
HDS-WHDI100T
®
WIRELESS HD
TRANSMIT TER
DC5V HDMI1 HDMIOUT IROUT
SERVICE
HDMI2
What’s in the Box
Hardware Identification
Installation and Setup
1 2 345 123
6
1.DC 5V
2.HDMI 1
3.HDMI 2
1.Mini USB DC IN
2.HID USB
3.HDMI OUT
Transmitter
Transmitter(rear view) Receiver(rear view)
Step1
Connectone end of an HDMI cable (not included) into the
HDMI1 port on the
Transmitterand the other end into the HDMI port on your AVdevice. Repeat the
abovestep to connect an additional AVdevice to the
HDMI2 port.
Step2 (Optional pass-through connection)
Connectone end of an HDMI cable (not included) into the
HDMIOUT port on the
Transmitterand the other end into the HDMI port on your HDTV.
Step3
Connectone end of the DC power adapter into the DC 5V port on the Transmitter
andplug into a power outlet.
Receiver
Step1
Connectone end of the HDMI cable (1) to the HDMI OUT port on the
Receiverand connect the other end of the HDMI cable (1) to the HDMI port
onthe HDTV.
Step2
Connectthe mini USB end of the of the DC power adapter (2) into the
Mini
USBDC IN
on the Receiver and plug into a power outlet.
Blu-rayDisc™Player
HDMediaPlayer
1
1
32
HDTV
1
2
4.HDMI OUT
5.IR OUT
6.HID USB / SERVICE
-Transmitter
-Receiver
-IR Flasher, 3ft (1m)
-HDMI cable, 5ft (1.5m)
-Remote control (battery included)
-DC power adapter
-Mini USB power adapter
-Quick start guide
-User manual
Quick Start Guide
ModelNo. HDS-WHDI100
WIRELESS HD
MULTIMEDIA SYSTEM
®
HDMI
OK
Remote Control
Mounting Hardware AAA Batteries (2)

7 of 34 ISSUED: 01-09-13 SHEET #: 180-9045-1
Product Overview
Transmitter
Transmitter Top
1. POWER Button
• Press to turn the Transmitter ON/OFF. The indicator light in the power button will be illuminated blue
when the power is on, glows red in standby mode, and glows purple in pairing mode.
2. SOURCE Selection Button
• Press to toggle AV device inputs.
3. Source Indicator Lights
• The source indicator lights will be illuminated to show current input selected.
21 1
23

8 of 34 ISSUED: 01-09-13 SHEET #: 180-9045-1
Transmitter Back
1. DC 5V
• DC power input port.
2. HDMI 1
• HDMI 1 input port.
3. HDMI 2
• HDMI 2 input port.
4. HDMI OUT
• HDMI pass-through output port.
5. IR OUT
• Connects IR Flasher to the Transmitter for remote control of AV devices which are connected to the
Transmitter (i.e. Blu-ray player, DVD, STB, etc).
6. SERVICE
• Supports remote usage of USB HID peripheral, such as gaming controller, mouse or keyboard.
DC 5V HDMI 1 HDMI OUT IR OUT
SERVICE
HDMI 2
1 2 3 4 6
5

9 of 34 ISSUED: 01-09-13 SHEET #: 180-9045-1
1. POWER Button
• Turns the Transmitter and Receiver power ON/OFF.
2. INFO Button
• Press to display OSD (On Screen Display) for system related information on HDTV connected to the
Receiver.
3. IR Button
• Press to change the IR Flasher frequency to meet the AV device’s requirement.
4. SOURCE Button
• Press to toggle between AV devices connected to the Transmitter.
5. TRANSMITTER NO. Button
• Press to select the transmitter selection menu, and allows access to SETUP menu for pairing, removing
and renaming a Transmitter.
6. Navigation Buttons
• Use the up, down, left or right buttons to navigate through the menus and select menu items.
7. OK Button
• Press the OK button to execute the selection navigated to by using the NAVIGATION buttons.
Remote Control
OK
12
3
45
6
7

10 of 34 ISSUED: 01-09-13 SHEET #: 180-9045-1
Installing the Remote Control Batteries
Remove the battery compartment cover. Place two AAA batteries (included) into the remote control as shown.
Replace the battery compartment cover.
Battery Compartment Cover