Pentair Kreepy krauly User manual

2
Congratulations on purchasing the best pool-cleaning system in the world! Your new Kreepy Krauly
will provide you with years of carefree pool enjoyment, as it efficiently vacuums your pool for you.
Before long, you’ll wonder how you ever got along without Kreepy Krauly.
irst, however, you’ll have to install Kreepy Krauly and perhaps make some minor adjustments.
This manual covers the steps needed to install and adjust Kreepy Krauly.
Contents
I. Pool Preparation .................................................................................................. 3
II. Assembly ............................................................................................................. 3
III. Installation ........................................................................................................... 6
- Standard pool installation.................................................................................. 6
- Non-standard pool installations......................................................................... 7
IV. Adjustments...................................................................................................... 8-9
V. Troubleshooting............................................................................................ 10-12
VI. Kreepy Krauly Parts, Hose and Accessories ..................................................... 13
VII. Maintenance....................................................................................................... 14
VIII. Customer Service............................................................................................... 14
Please record the serial number of your Kreepy Krauly in the space below. This way, if you need
to refer to the serial number in the future (e.g. if you call the Customer Helpline), it will be readily
available. The diagram on page 3 shows where Kreepy Krauly’s serial number is located.
Kreepy Krauly erial Number ________________________________
Activate Kreepy Krauly’s Warranty
You will also need to record this serial number on Kreepy Krauly’s warranty registration card.
Complete and return the card to activate Kreepy Krauly’s warranty. The registration card is self-
addressed and postage-paid for your convenience.
Toll-free Customer Helpline
If you have questions about your Kreepy Krauly, check the instructions in this manual or view
the included installation video. If you still have a question, call our Customer Helpline at
1-800-443-5711. Please have your Kreepy Krauly serial number ready when you call.
Warranty Note
Cleaners purchased in the United States of America from entities outside the United States do not
qualify for any United States programs including warranty, trade-in, or rebate programs.
Welcome
10-Day Money-Back Guarantee at Participating Dealers
We are so sure you’ll be satisfied with the way your new Kreepy Krauly cleans your pool, that we
offer a special money-back guarantee at participating dealers. Here’s how it works:
1. Should you have any questions regarding the operation of the cleaner, call your
Pentair Pool Products dealer.
2. or additional assistance, call our Customer Helpline at 1-800-443-5711.
3. If you are not completely satisfied, return the Kreepy Krauly (including all the contents in the
box), with your proof of purchase to your dealer within 10 days for a full refund.
15
Kreepy Krauly Hose & Accessories
K121240
Hose Connector
K21241B Blue
K21241 White
4” Female/Female Hose
R211084K
Leaf Trap with
Handle (clear)
K12330
Ladder Guard
K12097
90° Hose Connector
K12182
Baffle Plate
K121683
Eyeball Diverter
Outer Ring
K12173
Bumper End Clip
K121620
Wire Diverter
GW9530
nap-Lock Wall
Fitting
K3349
Vac Line Deflector
K12076
Vac Plus II
Locking Bar
K12078
45° Hose Connector
K01200
COMPLETE VACUUM HO E A EMBLY – BLUE
(40 ft. total Length)
-11 ections Male / Female Hose (40")
-1 ection Female / Female Hose (40")
K12465
Hose Protector
K12094
Manual By-pass for
Automatic
Regulator Valve
K12065
Wall Climb Adjuster
K121680
Eyeball Diverter
K12068
Vac Plus II
Plate 71⁄4''
K12895
tarfish eal
(For Concrete Pools On y)
K121110
2'' Hose Cone

314
5.
4.
7.
1.
3.
2.
6.

10.
9.
8.
1
I. Preparation Of Your Pool
Before assembling and installing your Kreepy Krauly, your pool should be clean and algae-free so as not
to inhibit the cleaner’s traction. If necessary, make the following preparations before proceeding:
1. Chemically balance the pool water.
2. Brush pool and let the debris settle.
3. Hand vacuum thoroughly.
4. Clean filter and pump strainer basket.
II. Assembly
Remove Kreepy Krauly and all of its parts from the box and check to make sure that all components
were included. Refer to igure 1.
Components Check List
1. Dive float restrictor
2. Kreepy Krauly
3. Locking end clip
4. Roller bumper strap
5. Hose weights
6. Wings
7. Eyeball diverter and outer ring
8. Hose Protector
9. Valve cap
10. Automatic regulator valve
11. Threaded compression adapter
12. Pleated or Starfish seal
13. Hose – 40 ft. total length (not shown)
14. Installation manual (not shown)
16. Pleated or Starfish seal
17. Hose – 40 ft. total length (not shown)
18. Installation video (not shown)
Step 1. Attach The Wings
Kreepy Krauly’s wings snap into place – no tools are needed. Position the wings so you bring the band
around the main body as shown in igure 2. Slip the wings into the groove in Kreepy Krauly’s main
body, then snap the band clamp into place.
Main Body
Wings
Seria Number
11.
or
For Concrete Poo s On y
Figure 1
Figure 2
VII. Maintenance
Kreepy Krauly requires almost no maintenance. Visually inspect your Kreepy Krauly from time to time
to make sure that:
• The flapper is moving freely and is not obstructed by debris.
• The foot pad is not excessively worn. When the traction pads on the bottom have worn
down, it is time for replacement.
We recommend that you leave Kreepy Krauly in your pool, except during chemical shock treatments.
During swimming it is easy to unplug Kreepy Krauly and pull it to one side.
When storing Kreepy Krauly, do not coil the hose. Lay the hose flat in an area protected from direct
sunlight. If hose sections are disconnected, try not to disturb the hose weight locations.
Kreepy Krauly’s hose is specially designed to ensure optimum performance from Kreepy Krauly. Should
replacement be required, insist on genuine Kreepy Krauly hose.
VIII. Customer Service
Your satisfaction is important to us, so we’re happy to help you get the best performance possible from
your new Kreepy Krauly. This manual and the video included with your Kreepy Krauly cover
a wide range of performance adjustments, which may apply to your pool.
If you still need help, call your Pentair Pool Products dealer or call our toll-free Customer Helpline
at 1-800-443-5711. Please have your Kreepy Krauly serial number ready when you call.
Disclaimer of Liability –
About Your Pool and Kreepy Krauly
There are a multitude of factors that contribute to the life of your pool. The Kreepy Krauly automatic
pool cleaner is a very passive product that will have no impact on pool life.
Please be aware that over time, deterioration, discoloration and brittleness of any pool finish can be caused
separately by, or in combination with, age, an imbalance in pool water chemistry, improper installation
and other factors. An automatic pool cleaner, such as Kreepy Krauly, will not remove or cause wear on
“good” pool plaster. In fact, the opposite is true—pool plaster will eventually cause wear on the cleaner.
The same situation holds true for vinyl-lined inground swimming pools, because vinyl liners are also
affected by the environment and factors such as pool water chemistry, sunlight and the pool’s surroundings.
Therefore over time, vinyl can become brittle and weak. In addition, vinyl-lined pools are affected by the
workmanship, composition and installation of the liner and the workmanship and quality of construction
of the supporting walls and pool base. These are all factors which can contribute to liner failure. The
existence of any of these type of conditions in your pool is not caused by the use or operation of Kreepy
Krauly. The manufacturer disclaims any liability for repairs or replacement to any of these structures or
components of the customer’s pool.
The pool owner must assume all responsibility for the condition and maintenance of the pool’s surface,
water and deck.
9.
10.
11.
12.
8.

4
Step 2. Attach The Seal
Your Kreepy Krauly comes equipped with one of
two seals.The Pleated seal is our universal seal and
works in all pool types: concrete, vinyl, fiberglass,
and tile. And our Starfish seal which is used
exclusively in concrete pools only.
To install either seal locate the words “This ide
Up” and face them towards the main body. Slip
the seal over the footpad – (flat side down towards
pool floor) and pull gently until it seats itself on the
other side in its groove, as illustrated in igure 3.
The seal must be installed flat side down, pleated/
contoured side up. Once in place, the seal should
rotate and turn freely.
The seals are not reversible. The raised pleats on
the Pleated seal and the contours on the Starfish
seal must face upward. The flat side of the seal
should face down to rest against the pool surface.
Step 3. Attach The Roller Bumper Strap
Insert the bottom end of the strap into the slot
provided on the main body. Insert the top end of the strap into the locking clip attached to the swivel
head. See igure 4.
Step 4. Attach The Dive loat Restrictor
Snap the dive float restrictor into the lower U-shaped brace between the dive floats. Make sure the
locking tabs on both sides of the dive float restrictor snap securely into place. See igure 5.
Pleated/ tarfish eals in their Grooves
Flange
Dive Float
Dive Float
Restrictor
Locking
End Clip
wivel
Head
Main
Body
Flat Tab
Main
Body Main
Body
Pleats of
Pleated eal
The flat side of seal faces down to est on the pool’s su face.
(For Concrete Pools Only)
Figure 3
Figure 4 Figure 5
13
VI. Kreepy Krauly Parts List
K12164
Dive Float Restrictor
K12157
Dive Float
K12181
Dive Float Clip Kit (2)
K12158
Weight Holder
K12160
Wing et
K12896
Pleated eal
K12059
Foot Pad
K12004
Automatic Regulator
Valve
K12161
Roller Bumper trap Kit
(includes bumper roller
and end clip)
K12156C
wivel Cone and Bearing
K12163
Drive Tube
Top/Bottom
(1)
K12156
wivel Head Assembly
K12155
Main Body
-With Exchange On y
(Excludes Flapper)
“Insist on Genuine Kreepy Krauly Parts To Protect Your Warranty”
K12054
Hose Weight
K12961
Valve Cap
K12079
Threaded Compression
Adapter
K12087
Bearing Washer

5
Step 5. Attach The Hose Weights And Assemble The Hose
The Kreepy Krauly hose comes in sections which must be assembled. You’ll need enough sections to
reach from where Kreepy Krauly is connected, to the farthest part of your pool, plus one section. You will
also have to attach hose weights to the hose to neutralize the hose’s buoyancy in water. The number of
hose weights required is determined by the maximum depth of your pool. The deeper your pool, the more
weight is needed. The number of hose weights appropriate for your pool is explained in Table A.
Twist and push the female ends onto the
male ends after dipping the ends into the
pool to wet them. See igure 6. Continue
until you’ve connected all the sections you
need. After connecting the hose weights
to the hose as described in “Table A”, then
connect the hose to Kreepy Krauly. See igure 7.
One of the hose sections has 2 female ends.
This section should be fitted last and
attached to the pool’s vacuum connection.
Before attaching the Female/Female
ection to your vacuum connection you will
first need to install the hose protector on to the Female/Female hose section. The hose protector is
used to protect the hose from wear.
NOTE: May substitute 4 inch Female/Female hose.
Male Hose End Female Hose End
TABLE A
Pool depth Weight Placement
4 feet or less 1 weight: 4 to 12 inches from
Kreepy Krauly’s swivel head.
More than 4 feet, 2 weights: one 4 to 12 inches
but less than 7 feet and one 6 feet from
the swivel head.
More than 7 feet, 3 weights: one 4 to 12 inches,
but less than 12 feet one 6 feet and one
10 feet from the swivel head.
More than 12 feet 4 weights:* one 4 to 12 inches,
one 6 feet, one 10 feet,
and one 12 feet from the
swivel head.
* Contact your Pentair Pool Products dealer if you need to purchase additional hose weights.
wivel Head
4''-12''
6' 10'
Female End of a Male/Female ection
Hose Weights
Female/Female ection
with hose protector
to be added last
NOTE: The hose length
illustrated is not representative
of actual size. You will need to
use more sections than shown.
You fully assembled K eepy K auly should look like this.
Figure 6
Figure 7
12
If Kreepy Krauly tracks in a repetitive pattern.
• Check the swivel on the top of Kreepy Krauly. It should turn freely.
• Check the return line water flow and re-direct as necessary with an eyeball diverter. Refer
to page 9.
• Check Kreepy Krauly’s hose to ensure it has not become bent or kinked. It only takes one
bent or kinked hose section to hinder the cleaning coverage. One way to check for kinks in
your hose is to lay each section flat on your pool’s deck (or other flat surface). The hose
should be perfectly straight and flat. Do not coil the hose when taking your Kreepy
Krauly out of the pool because it will retain the coil shape, forming a bend or kink.
If Kreepy Krauly gets stuck on pool obstructions such as a
safety ledge, ladders, steps, swim-outs, benches, etc.
• Remove dive float restrictor and install a wall climb adjuster
(Part #K12065). Snap the wall climb adjuster into place as
shown in igure 17. This will keep Kreepy Krauly on the
pool’s floor and away from pool obstructions. Make sure
the narrow end of the wall climb adjuster points down to the
drive tubes.
• If Kreepy Krauly gets stuck under your pool ladder, install a
Ladder Guard (Part #K12330) according to the instructions
contained in the packaging. (These accessories are available
for purchase from your Pentair Pool Products dealer.)
To Remove Debris rom The lapper
• Sometimes debris may clog the bottom of the cleaner and
prevent flapper movement or restrict flow. The flapper is
located inside the main body and must move freely at all
times. You can see the flapper through the opening in the
baffle plate, when you turn the cleaner upside down as shown
in igure 18. Jiggle the flapper with your finger or flush the
cavity with a hose to force out any debris lodged inside the
main body.
• If debris is still lodged inside, you must remove the flapper.
irst, lift the lip of the foot pad and insert a flat-head
screwdriver along side one of the two tabs found on the
baffle plate. See igure 19. Push the tab inward with the screwdriver until the baffle plate releases.
Place a finger into the center opening of the baffle plate and pull up until it pops out. Then pull
the flapper out. NOTE: You should be able to do this without taking the foot pad off.
• Once the debris is dislodged, insert the flapper back into the main body and snap the baffle
plate back into position. Be sure that it is securely in place. See igure 19.
Wall Climb
Adjuster
Dive Float
Figure 17
Bottom View of Cleaner
Flapper is
Inside
Baffle Plate
Foot Pad
Pleated
eal
Foot Pad
(not necessary to remove)
Baffle Plate Flapper Main Body
Figure 18
Figure 19

6
III. Installation
Kreepy Krauly is designed to work in a wide variety of swimming pools. That’s why we’ve included
certain items (such as a threaded compression adapter and valve cap for the automatic regulator valve) with
your Kreepy Krauly. These may or may not be needed, depending on the particular features of your pool.
Both the standard in-skimmer installation and an optional vacuum line installation are covered in this
manual. Check to see which most closely fits your pool configuration and follow the directions. If the
set-up of your pool is unlike any of the examples, contact your Pentair Pool Products dealer for
assistance or call our toll-free Customer Helpline at 1-800-443-5711.
Standard Installation Fo pools with one skimme , using the automatic egulato valve.
The advantage of this installation is that the automatic regulator valve automatically balances the water flow
between the skimmer and Kreepy Krauly. We strongly recommend the use of the automatic regulator
valve for maximum safety and performance. The valve automatically adjusts to changes in the amount of
water flow to provide Kreepy Krauly with the power necessary to ensure proper cleaning performance.
1. Turn the pool pump off.
2. Close the main drain and all suction lines, except the line
from the skimmer to which Kreepy Krauly will be
connected.
3. Remove skimmer basket.
4. Screw the threaded compression adapter into the vacuum
connection in the bottom of the skimmer. See igure 9.
NOTE: Use two wraps of Teflon tape around threads
to ensure easy removal.
(If the opening in the bottom of the skimmer is not
threaded, use a 2'' hose cone, as shown in igure 8. It is
not included with your Kreepy Krauly, but can be
purchased from your Pentair Pool Products dealer.)
5. Press the automatic regulator valve into the threaded
compression adapter. The end of the valve that is marked
“Attach Hose This End” must point up. See igure 9.
6. Place Kreepy Krauly into the pool and allow it to sink to
the floor. Continue to feed the hose vertically down into
the pool until it is completely filled with water and
purged of air.
7. Slide the hose protector into position on the hose to
prevent the hose body from rubbing against the skimmer
wall. See igure 9.
8. Insert the end of the hose through the skimmer opening
and connect the hose directly onto the automatic regulator
valve.
Attach Hose This End
Automatic
Regulator Valve
Threaded
Adapter
crew (or press) into
bottom of skimmer
2'' Hose Cone
(not included)
Figure 8
Hose through
kimmer
Opening
with Hose
protector
Automatic
Regulator
Valve
Threaded
Compression
Adapter
(or 2'' Hose Cone)
Attach
Hose
This End
Top of kimmer
Figure 9
11
If Kreepy Krauly is moving too fast.
In most pools, the automatic regulator valve supplies Kreepy
Krauly with the proper amount of water flow. However, if used
with an especially powerful pool pump, the valve can be
overpowered.
• To slow Kreepy Krauly down, a manual by-pass valve
(Part #K12094) accessory is available for purchase from
your Pentair Pool Products dealer. This manual by-pass
can be adjusted to achieve the recommended cleaner
speed of 8 to 12 feet per minute.
• To decrease the speed of Kreepy Krauly, simply remove
the in-line valve cone from the bottom of the automatic
regulator valve and replace it with the manual by-pass as
shown in igure 15.
• Press the automatic regulator valve into the threaded
compresion adapter (or 2" hose cone if used). The end
of the valve that is marked “Attach Hose This End”
must point up.
• Adjust the manual by-pass while the Kreepy Krauly is
running. Place your hand into the skimmer and turn the
by-pass adjuster one click at a time until the desired
speed of 8-12 feet per minute is reached. See igure 16.
If Kreepy Krauly pulls air from, or remains at,
the water surface.
• Check to ensure the dive float mechanism is operating
freely and the dive float restrictor is
•installed. (See page 4 for how to install dive float restrictor.)
• Check the automatic regulator valve for its proper installation and ensure it is not clogged
with debris.
• Make sure the water level is at least 3 inches below the pool deck.
• Check to ensure your Kreepy Krauly is operating at the proper speed of 8-12 feet per minute.
If Kreepy Krauly stays at the shallow end steps.
• Check the return line water flow and redirect as necessary with an eyeball diverter. Refer
to page 9.
• Check the automatic regulator valve for its proper installation and ensure it is not clogged
with debris.
• Check that hose is long enough to reach the furthest point of the pool, including pool steps.
Refer to page 8.
• Check that Kreepy Krauly has proper hose balance in shallow end. Refer to page 8.
• Check to ensure your Kreepy Krauly is operating at the proper speed of 8-12 feet per minute.
• Check to ensure the dive float mechanism is operating freely and the dive float restrictor is
installed. (See page 4 for how to install dive float restrictor.)
• Shorten the roller bumper strap by 1⁄2inch. (Pull out upper end of bumper strap from locking end
clip attached to swivel head. Cut 1⁄2inch off, then return bumper strap into locking end clip.)
Automatic
Regulator
Valve
Pull Off
Press On
Manual In-Line
Automatic Regulator Valve
with Manual By-pass
Manual By-pass
Fully Closed
Manual By-pass
Fully Open
Figure 15
Figure 16
Female/
Female Hose
may
substitute
4” Female/
Female Hose

Optional Vacuum Line Installation Vacuum Line Installation With Automatic Regulato Valve
in Skimme .
We recommend the use of the automatic regulator valve to balance water flow between Kreepy Krauly and
the skimmer. When attaching Kreepy Krauly to a dedicated vacuum line, the automatic regulator valve
should be installed in the skimmer.
1. Turn the pool pump off.
2. Close the main drain and all suction lines, except the
skimmer and the vacuum line to which the Kreepy
Krauly will be connected.
3. Thread the snap-lock wall fitting into the end of the
dedicated suction line. Then insert the male end of the 45°
hose connector into the snap-lock fitting. See igure 10.
NOTE: Use two wraps of Teflon tape around the
threads to ensure easy removal.
4. Place Kreepy Krauly (with the hose and hose weights
assembled and attached) into the pool and allow it to sink
to the floor. NOTE: You will have to remove the
female/female hose section in this installation. Continue
to feed the hose vertically down into the pool until it is
completely filled with water and purged of air.
5. Insert the male hose end of the last hose section into the 45° hose connector or directly into the snap-lock
wall fitting. Reminder: Do not use the female/ female hose section in this installation. See igure 10.
6. Screw the threaded compression adapter into the vacuum
connection in the bottom of the skimmer. NOTE: Use two
wraps of Teflon tape around the threads to ensure easy
removal. If the opening in the bottom of the skimmer is not
threaded, use a 2'' hose cone, the 2'' hose cone is not provided
but can be purchased from your Pentair Pool Products dealer.
7. To prevent water from flowing through the top of the
automatic regulator valve, fasten the valve cap onto the top
of the regulator valve. This activates the regulator valve and
assures that an accurate amount of water (25 gpm) will flow
through the vacuum line and the Kreepy Krauly. Without the
valve cap, the automatic regulator valve and the cleaner will
not function properly. See igure 12.
8. Press the automatic regulator valve into the threaded compression adapter. See igure 12.
7
Accessories NOT PROVIDED:
Snap-Lock Wall itting NS
(Part #GW9530)
45º Hose Connector
(Part #K12078)
nap-Lock Wall Fitting
45° Hose
Connector
Male/Female
Hose ection
Thread nap-Lock
into Dedicated
uction Line
in Pool Wall
Figure 10
Top of kimmer
Automatic
Regulator
Valve
Threaded
Compression
Adapter
(or 2'' Hose Cone)
Valve
Cap
Automatic
Regulator Valve
Threaded
Adapter
crew (or press) into
bottom of kimmer
2'' Hose Cone
(not included)
Attach Hose This End
Figure 11
Figure 12
10
V. Troubleshooting
Because of the individual characteristics of your pool, some additional adjustments may be required to
get the best performance from your Kreepy Krauly.
If there seems to be a problem, check these common causes of cleaner problems. If you still need help,
call your pool professional or call our toll-free Customer Helpline at 1-800-443-5711.
—Is bottom main drain closed? Close drain
—Is filter clean? Clean filter
—Is pump strainer basket clean? Clean basket
—Is debris blocking the bottom
of Kreepy Krauly? Remove debris
—Are there any leaks in the hose? Replace leaky section
—Is automatic regulator valve
free of debris? Clean valve
If Kreepy Krauly is not moving or not pulsating.
• Check to ensure that the main drain and all suction lines are closed, except for the suction
line to which Kreepy Krauly is attached.
• Check for debris in the filter or pump basket.
• Check for debris in Kreepy Krauly’s flapper. Debris may prevent flapper movement or
restrict flow. See page 13 for instructions.
• Pool pump and filter system may be too small (incapable of providing 25 gallons per minute
water flow). Consult your pool professional.
If Kreepy Krauly stays in one end of the pool.
• Check the return line water flow and redirect as necessary with an eyeball diverter.
Refer to page 9.
• Check that hose is long enough to reach to end of pool. Refer to page 8.
• Check that Kreepy Krauly has proper hose balance. Refer to page 8.
If Kreepy Krauly stays on the main drain.
• Check to ensure that main drain is closed. A pool professional may need to assist you.
• Check to ensure that a main drain grate is installed.
• If main drain is not flush with the pool floor, consult your pool professional.
If Kreepy Krauly slows or stops and air bubbles enter the pool at the return line.
ind and correct the air leak that is causing the pump to lose its prime:
• Check the hose to ensure there are no leaks.
• Check the vacuum connection. It should be submerged so no air enters the system.
• Check the pump basket lid for looseness, cracks, and worn or missing O-rings. If you need
assistance, contact your pool professional.

8
IV. Adjustments
After completing the installation, turn the pool pump on. Allow the pump to run for a couple of minutes
to ensure all air cycles out of the system. Kreepy Krauly should be moving about the pool at a rate of
8 to 12 feet per minute. Check each of the following initial adjustments to Kreepy Krauly at this time.
Hose Length
IMPORTANT: The pump must be on when you check the hose length. The hose contracts when the
pump is operating and will be longer when the pump is off.
With Kreepy Krauly operating, position it at the furthest point of the pool from where it’s attached. (It is
easy to position Kreepy Krauly in the pool by moving it about with your pool pole and brush.) Kreepy
Krauly’s hose should be long enough to reach the end of the pool, plus one hose section. If necessary,
remove extra hose sections from the center portion of hose. Removing center hose sections avoids
having to disturb the hose weight placement. Save extra hose sections for use as needed for replacement.
NOTE: Turn pool pump off when adding or removing hose sections.
Hose Balance
To determine correct hose balance, turn the pump off and observe Kreepy Krauly. Hose balance is
correct when Kreepy Krauly’s seal rests flat on the pool floor and the drive tubes make a 45° angle with
the floor, as shown in igure 13. Kreepy Krauly achieves the best cleaning coverage when the hose
neither weighs down nor pulls up on the unit. Adjust hose weights one inch at a time as needed, until
proper hose balance is achieved. In pools with both shallow and deep areas, adjust hose weights first in
the deep area and then in the shallow area.
1. Hose Too Light. If the hose rises toward the surface at an angle greater than 45°, move the
weights closer to Kreepy Krauly, or move the first two weights closer to each other.
2. Correct Hose Balance.
3. Hose Too Heavy. If the hose sags
downward at an angle less than
45°, move the weights away from
Kreepy Krauly, or separate the first
two weights away from each other.
1. Hose Too Light
2. Correct Hose
Balance
3. Hose Too
Heavy
Figure 13
Return Line Water low
IMPORTANT: The water flow from your return line can push Kreepy Krauly’s hose and affect its
performance. It may cause Kreepy Krauly to steer away from the end of the pool where the return line is
located, or it may cause Kreepy Krauly to remain in one section of the pool. To correct this, use the eyeball
diverter included with your Kreepy Krauly. (If the eyeball does not fit your pool, use the wire diverter
(Part #K121620) accessory available for purchase from your Pentair Pool Products dealer.)
To install the eyeball diverter:
• irst make sure your pool pump is off. Remove the original eyeball from the return line at
• the pool by unscrewing the lock ring.
• Replace the original eyeball with the Kreepy Krauly eyeball diverter.
• Replace the lock ring and tighten. Make sure the opening of the eyeball diverter points in
• the proper direction before tightening fully. See “Eyeball Diverter Positions” below.
IMPORTANT: The eyeball diverter must fit snugly into the eyeball fitting. Some eyeball fittings,
like Aqua Leader or Olympic, may be too large for the eyeball diverter. In this situation, use the outer
ring supplied with your Kreepy Krauly to adjust for the discrepancy in size.
• Snap the outer ring onto the eyeball diverter and position it in the first groove as shown in igure 14.
• Insert the eyeball diverter/outer ring assembly into the eyeball fitting in the return line.
• Install the lock (retaining) ring and tighten. See igure 14.
Eyeball Diverter Positions
Position the diverter opening to redirect the return line water flow so it does not interfere with Kreepy
Krauly’s movement. Try different positions to see which works best in your pool:
• flow directed along the side of pool (the tile line).
• flow directed downward.
• flow directed against the hose will help steer Kreepy Krauly away from obstructions such as
stairs and ladders.
After installing the eyeball diverter, turn the pool pump on. Kreepy Krauly should begin moving across
the pool floor vacuuming up debris in its path.
9
Eyeball Diverter Wire Diverter (optional)
Lock (Retaining) Ring
Eyeball
Diverter
Pool Deck
Pool Wall
Return
Line
Eyeball
Fitting
Outer Ring
Eyeball Diverter
nap into
this Groove
Figure 14