PEPE RIKU User manual

www.pepegarden.co.ukSustainably Sourced & Ergonomically Designed
RIKU ROCKING CHAIRS
ASSEMBLY GUIDE
1 |
It is useful to refer to the photographs in the
brochure when assembling your furniture.
The seat part comes made up and is numbered
on the side. The leg assembly must have a
matching number on the box.
Bolt the legs/armrest assembly to the seat
using a 14mm socket spanner, please refer to
pic 1. The longer bolts go through the armrests
into the back of the seat, the other bolts go
four either side through the legs into the seat
part. Fit foot bar into holes in the front of the
leg pieces before completing the bolting of
the second leg piece. In the case of the double
rocker t the foot pole through the support
piece and aach to the underside of the centre
of the seat, refer to pic 2. Then bolt the springs
either side onto the inside of the leg using a
10mm spanner as marked.
Finally bolt the assembly to the inside of the
base. Make sure that the front of the seat is
facing in the same direction of the arrow on the
base part. The base should have the rounded
edges on the top of the frame. Refer to pic 3.
The distance of the front of the frame is less
than at the back of the frame.
Picture 1
Picture 2
Picture 3
DON’T FORGET TO PAINT ON THE FURNITURE PROTECTOR AS SOON AS THE
PRODUCT IS ASSEMBLED, UNLESS ANOTHER FINISH IS TO BE APPLIED.

www.pepegarden.co.ukSustainably Sourced & Ergonomically Designed
2 |
ASSEMBLY GUIDE | RIKU ROCKING CHAIRS
Sustainably
Sourced &
Ergonomically
Designed
www.pepegarden.co.uk