Perenio Power Link Device PEHPL01 User manual

Installation and Operation Manual
for Perenio® Power Link
Devices
November, 2019

Installation and Operation Manual
for Perenio® Power Link Devices
©Perenio IoT spol s r.o. All rights reserved Doc Version: 1.1.1
Page 3of 31
Introduction
The Power Link device is designed to monitor voltage, current and power of plugged
in electrical equipment and provides for timely notification of overloads and other
events. This device is used as part of the Perenio Smart Building Management
System upon detection by the Perenio® Control Gateway or IoT Router and can also
be controlled via intelligent voice assistants.
The present Manual contains a detailed description of the power plug, as well as
instructions for its installation and operation.
Copyrights
Copyright of ©Perenio IoT spol s r.o. All rights reserved.
The Perenio® trademark is owned by Perenio IoT spol s r.o. (hereinafter referred to
as the Perenio IoT). All other similar trademarks and names, as well as logos and other
symbols are the property of their respective owners*.
All materials under Perenio® tradename contained therein are protected in
accordance with international and local laws including Acts on copyrights and related
rights.
Any reproduction, copying, publication, as well as further distribution or public display
of materials contained in the present document (whether in full or in part) shall not be
allowed until an appropriate permission of the copyright owner is obtained. Any
unauthorized usage of materials contained herein may lead to civil liability and criminal
prosecution in accordance with applicable laws.
Any eventual mentioning of other company names and equipment in the present
document is made solely for the purpose of clarifying and describing the device
operation and shall not infringe on the third party’s intellectual property rights.
*ZIGBEE is the registered trademark of ZigBee Alliance; iOS is the registered trademark of CISCO TECHNOLOGY, INC.;
Android is the registered trademark of Google Inc.; Google Play and Google Home are trademarks of Google Inc.; App
Store, Apple HomeKit and Siri are registered trademarks of Apple Inc.; Linux is the registered trademark of Linus
Torvalds, Yandex is the registered trademark of YANDEX LLC.

Installation and Operation Manual
for Perenio® Power Link Devices
Doc Version: 1.1.1 ©Perenio IoT spol s r.o. All rights reserved
Page 4of 31
Responsibility and Technical Support
The present document is prepared in accordance with all necessary requirements and
contains detailed information on the device installation, configuration and control valid
as of the date of its issue.
Perenio IoT reserves the right to modify the device and make corrections or changes
to this document without prior notice of the User, and shall not be responsible for any
potential negative consequences which may arise from the use of an outdated version
of the document, as well as for any possible technical and/or typographical errors,
either omitted or accidental, or any related damage that may result from the document
transfer or the use of devices.
Perenio IoT shall make no guarantee with respect to any data contained herein
including but not limited to the device merchantability and fitness for a particular
purpose.
For any technical issues, please contact your local Perenio IoT representative or the
Tech Support Department at perenio.com.
The most common problems may be found in Section 7 of the present document and
at perenio.com where you can also download the latest version of this Installation
and Operation Manual.
Manufacturer:
Perenio IoT spol s r.o.
Na Dlouhem 79, Ricany –Jazlovice 251 01, Czech Republic
perenio.com

Installation and Operation Manual
for Perenio® Power Link Devices
©Perenio IoT spol s r.o. All rights reserved Doc Version: 1.1.1
Page 5of 31
Conformance to Standards
The device is CE certified and complies with requirements of the
following Directives of the European Union:
2014/53/EU Radio Equipment Directive (RED);
2014/35/EU Low Voltage Directive;
2004/30/EC Electromagnetic Compatibility Directive.
The device has passed all procedures of assessments established
in Technical Regulations of the Customs Union and conforms with
standards of the Customs Union
The device complies with the requirements of Restriction of the Use
of Certain Hazardous Substances in Electronic and Electrical
Equipment (2011/65/EU Directive)
The device complies with the requirements to the level of
electromagnetic interference by the Federal Communications
Commission
The national conformity mark of the Ukraine indicating that the
device meets requirements of all applicable technical regulations
The device and supplied batteries must not be disposed of as a
household waste in accordance with the Waste Electrical and
Electronic Equipment Directive (2002/96/EC)
For the purpose of protection of the environment and human
health, both the device and batteries must be disposed of in
accordance with approved instructions on safe disposal. For more
information on proper disposal, please contact your device supplier
or local authorities responsible for waste management
Details on available Certificates are specified in Section 6 of the present document.
For copies of Certificates and Reports, please visit a corresponding Section at
perenio.com.

Installation and Operation Manual
for Perenio® Power Link Devices
Doc Version: 1.1.1 ©Perenio IoT spol s r.o. All rights reserved
Page 6of 31
Table of Contents
Introduction .................................................................................................. 3
Copyrights..................................................................................................... 3
Responsibility and Technical Support.................................................................4
Conformance to Standards...............................................................................5
Table of Contents ........................................................................................... 6
1 General Description and Specifications............................................................8
1.1 General Purpose.....................................................................................8
1.2 Technical Specification .......................................................................... 11
1.3 Scope of Delivery ................................................................................. 12
1.4 Упаковка и маркировка ....................................................................... 13
1.5 Правила безопасного использования .................................................... 13
1.6 Standalone Operation of Perenio® Devices .............................................. 14
2 Installation and Setup ................................................................................ 15
2.1 Initial Installation and Configuration........................................................ 15
2.1.1 Powering On the Device ................................................................... 15
2.1.2 Selection of the Connection Method ................................................... 16
2.1.3 Activation in the Perenio Smart Mobile Application ............................... 16
2.1.4 Additional Settings........................................................................... 19
2.1.5 Activation in Apple HomeKit .............................................................. 20
2.1.6 Management Through Google Home/Yandex Smart Home ...................... 20
2.1.7 LED Indication of Loads and Overload Protection ................................. 20
2.2 Changing the Room or Location for the Power Plug.................................... 21
2.3 History and Push-Notifications................................................................ 22
3 Maintenance and Repair.............................................................................. 23
4 Warranty Obligations.................................................................................. 24
5 Storage, Transportation and Disposal of Devices ............................................ 27
6 Other Information...................................................................................... 28
7 Troubleshooting......................................................................................... 30
8 Glossary................................................................................................... 31

Installation and Operation Manual
for Perenio® Power Link Devices
©Perenio IoT spol s r.o. All rights reserved Doc Version: 1.1.1
Page 7of 31
Figures and Tables
Figure 1 - Exterior.......................................................................................... 8
Figure 2 –Buttons, Ports and Indicators............................................................ 9
Figure 3 - Scope of Supply .............................................................................12
Figure 4 - Examples of Installation ..................................................................15
Figure 5 –Add new device (Power Plug) procedure ............................................19
Table 1 –LED Indicator statuses ...................................................................... 9
Table 2 –Basic Technical Specifications............................................................11
Table 3 –Permissible power limits...................................................................20
Table 4 –Typical Errors and Troubleshooting Methods........................................30
Connection to the Perenio Smart Mobile App
A. LOGIN TO THE EXISTING USER ACCOUNT ....................................................17
B. CONNECTION TO THE CONTROL GATEWAY ...................................................17

Installation and Operation Manual
for Perenio® Power Link Devices
Doc Version: 1.1.1 ©Perenio IoT spol s r.o. All rights reserved
Page 8of 31
1 General Description and Specifications
1.1 General Purpose
The Perenio® Power Link device is designed to monitor, control and automatically
cutoff power consumption by electrical equipment, as well as notify users of overloads.
This power plug is equipped with an autonomous timer that saves User settings even
in case of power failures, as well as with protective shutters that prevent foreign
objects from entering the device openings and in such a way protect children from the
electric shock.
The Power Link device has a number of distinctive features, namely:
Support for ZigBee 3.0 and Bluetooth (MFi);
Integration with Apple HomeKit (Siri), Google Home (Google Assistant) and
Yandex Smart Home (Alice);
iOS (10.1 and higher) and Android (5.1 and higher) smartphone compatibility;
Connection distance of up to 100 meters from Perenio® Control Gateway or
IoT Router;
Low power consumption of not more than 0.5W;
Peak power of 4,000W;
Overload and thermal protection;
Autonomous timer;
Voltage, current and power control;
IP20 Protection Class;
Plug type E/F, socket type F;
LED indication of current load;
Management through a free mobile application;
Cloud service support.
Figure 1 - Exterior

Installation and Operation Manual
for Perenio® Power Link Devices
©Perenio IoT spol s r.o. All rights reserved Doc Version: 1.1.1
Page 9of 31
2-a –Front View 2-b –Side View
Figure 2 –Buttons, Ports and Indicators
Buttons, Ports and Indicators
Protective Shutters
Special plastic covers for the power plug openings that
prevent foreign objects from entering therein, which
protects children from the electric shock
Power & Reset
Button
It is used to power on and off the device, as well as to
switch to different operating modes, and connect to the
Perenio Smart Mobile App via the Control Gateway/IoT
Router
LED Indicator
Light ring around the button perimeter where color
changes depending on the power consumption level and
various states of the device (See Table 1)
Socket Type F
Compatibility with plug type E/F
Plug Type E/F
Compatibility with socket type F
Table 1 –LED Indicator statuses
Indicator
Status
Description
Violet
Blinks
The device is switched on* and in the process of
activation in the Perenio Smart app
Green
Flashes
The device is switched on* and activated in the
Perenio Smart app or Apple HomeKit app
LED
Indicator
Power & Reset
Button
Plug
Type E/F
Protective
Shutters
Socket
Type F

Installation and Operation Manual
for Perenio® Power Link Devices
Doc Version: 1.1.1 ©Perenio IoT spol s r.o. All rights reserved
Page 10 of 31
Indicator
Status
Description
Blinks
The device is switched on*, but not activated in
the Perenio Smart app or Apple HomeKit app
Dark-blue
Flashes
The device is switched off**, but activated in the
Perenio Smart app
Blinks
The device is switched off** and not activated in
the Perenio Smart app or Apple HomeKit app
Pale-blue
Flashes
The device is switched off**, but activated in the
Apple HomeKit app
Red
Blinks
An error occurred, or overload protection was
activated
Green-yellow-
red
Flashes
The device is activated in the Perenio Smart app
and consumes energy. The color changes
smoothly depending on the current strength –
from 0A (Green) to 16A (Red)
Blinks
The device is activated in the Apple HomeKit app
and consumes energy. The color changes
smoothly depending on the current strength –
from 0A (Green) to 16A (Red)
* “The device is switched on” means that the power plug is connected to the source of power and supplies
energy to an appliance plugged into it.
** “The device is switched off” means that the power plug is connected to the source of power, but does not
supply energy to an appliance plugged into it.
*** If your device is activated in the Perenio Smart app, it won’t be able to be connected via Bluetooth in
Apple HomeKit until you switch to the MFi mode.
ATTENTION! All Products and the Mobile Application of the Company (including
any future software and hardware whether in-house or third-party developed) are
not intended for emergency responses and cannot be used as fire-extinguishing
equipment and/or for emergency intervention, including but not limited to fires,
flooding, gas leaks or explosions, burglary and theft, as well as natural disasters
and other force majeure circumstances leading to damage and/or losses incurred
by the Client or caused to their estates, personal property and/or other products,
devices, personal data and privacy.

Installation and Operation Manual
for Perenio® Power Link Devices
©Perenio IoT spol s r.o. All rights reserved Doc Version: 1.1.1
Page 11 of 31
1.2 Technical Specification
Table 2 –Basic Technical Specifications
Parameter
Value
Article
PEHPL01/PEHPL03 (white color)
PEHPL02/PEHPL04 (black color)
Communication
Technology
ZigBee 3.0 (IEEE 802.15.4), Bluetooth (MFi)
Compatibility
Android (5.1 and higher) and iOS (10.1 and higher)
Integration
Apple HomeKit, Google Home, Yandex Smart Home
MCU
NRF52840
ZigBee Coverage
Up to 100 meters (open space)
ZigBee Antenna
Type: Built-in
Transmitting Power: 8dBm
Receiver Sensitivity: -95dBm
Antenna Gain: -2dBi
Repeater Function
Yes
Operating Frequency
2,400MHz to 2,485MHz
Server
Remote
Power
Input voltage: AC 180V to 250V
Max current: 16A
Frequency: 50Hz to 60Hz
Operating power: 3,500W
Peak power: 4,000W
Power consumption: 0.5W max
Operating Temperature
0°C to +40°C
Operating Humidity
Up to 75% RH (non-condensing)
Storage Temperature
0°C to +50°C
Storage Humidity
Up to 85% RH
Степень защиты
IP20
Timer
Autonomous

Installation and Operation Manual
for Perenio® Power Link Devices
Doc Version: 1.1.1 ©Perenio IoT spol s r.o. All rights reserved
Page 12 of 31
Parameter
Value
RTC Module
Built-in
Installation
Directly into the mains socket.
For indoor installation only.
Casing Material
PC945, Class UL94-V0
Color
White or black
Dimensions (L x W x H)
54 mm x 76 mm x 54 mm
Weight
100 g
Warranty Period
2 years
Service Life
4 years
Certification
CE, EAC, RoHS, UA.TR
Data Protection
GDPR Compliance
1.3 Scope of Delivery
The following items and accessories are supplied within the Perenio® Power Link
package:
1. Power Link device (1 шт.)
2. Quick Start Guide (1 pc.)
3. Warranty Card (1 pc.)
4. Sticker (1 pc.)
1
4
Figure 3 - Scope of Supply*
* Images of accessories are provided for informational purposes only

Installation and Operation Manual
for Perenio® Power Link Devices
©Perenio IoT spol s r.o. All rights reserved Doc Version: 1.1.1
Page 13 of 31
1.4 Packaging and Labelling
The Perenio® Power Link device is supplied in a carton Gift Box of
104 x 104 x 64 mm (L x W x H) containing the full name and marking of the device,
the list of accessories provided and basic technical specifications thereof, as well as
the date of manufacture and information about the manufacturing plant of devices.
Weights of the package are as follows:
Net weight: 100 g;
Gross weight: 185 g.
1.5 Safe Operation Rules
For the proper and safe operation of Perenio® power plugs, follow the instructions
and safety procedures described in the present Manual. The Manufacturer shall not be
liable for any damage caused as a result of improper operation of devices.
Safe Operation Conditions
1. The device shall be installed indoors only.
2. Do not plug the device into other smart plugs in the mains.
3. Users shall observe storage/transportation conditions, as well as the operating
temperature mode of the device as declared by the Manufacturer. Do not use
the device in rooms with high humidity or extreme temperature variations.
4. When installing the device, Users shall provide for a gap of at least 10 cm wide
on each side of the device to ensure its adequate ventilation at the place of
installation (Do not cover the device with newspaper, tablecloth, curtains, etc.)
5. The device may be plugged into the power source, only if the mains voltage
matches the value indicated on the device casing and/or specifications.
6. Do not immerse the device in water or other liquids due to the risk of fire and/or
electric shock.
7. Keep the device away from open flame sources and hot surfaces.
8. Users must not drop, throw or bend the device or attempt to repair the device
on their own.
9. In order to avoid personal injury, it shall not be allowed to use the cracked or
in any other way damaged device.
10. Use dry cloth or cloth soaked in a small amount of water for cleaning (don’t
use harsh chemicals/cleaning agents). The device must be powered off before
cleaning.

Installation and Operation Manual
for Perenio® Power Link Devices
Doc Version: 1.1.1 ©Perenio IoT spol s r.o. All rights reserved
Page 14 of 31
11. Children shall not be allowed to use the device unsupervised and/or play with
it.
12. It is not recommended to use the device by persons with physical or mental
disabilities, unless they are under proper supervision or were properly
instructed on possible hazards and safe usage of the device.
ATTENTION! Faulty wiring and excessive mains voltage can cause electric shock.
There is a danger of burns because the device becomes hot during operation! Let
the device cool down completely.
1.6 Standalone Operation of Perenio® Devices
The Control Gateway/IoT Router in not necessarily required for all Perenio® devices
in order to alert Users on potentially dangerous situations
Thus, due to integration with Apple HomeKit the Power Plug can be used
autonomously.
NOTE that if it is required to manage the device via Google Home or Yandex
Smart Home (Alice), its preliminary activation in the Perenio Smart application is
required.

Installation and Operation Manual
for Perenio® Power Link Devices
©Perenio IoT spol s r.o. All rights reserved Doc Version: 1.1.1
Page 15 of 31
2 Installation and Setup
Installation of the Perenio® Power Link device is not required, since it shall be just
plugged into the electrical socket to start operation.
NOTE. It is not recommended to install the device in areas with a high level of
noise and a high-frequency interference. Reinforced concrete floors may reduce
the distance of wireless signal transmission.
Figure 4 - Examples of Installation*
* Images of accessories are provided for informational purposes only
The entire process of setting-up the device can be divided into several key stages:
Selection of the connection method (ZigBee, Apple HomeKit, Google Home or
Yandex Smart Home);
Activation of the device via the Perenio Smart Mobile App and/or Apple HomeKit;
Activation of the device in Google Home and/or Yandex Smart Home, if required.
NOTE. The Perenio Smart: Building Management System Mobile App Manual
document is available for downloading at the web-site.
2.1 Initial Installation and Configuration
2.1.1 Powering On the Device
To power on the device, it is enough to unpack it, plug into the electrical socket and
press the Power Button so that the LED Indicator lights up (or blinks slowly) green.

Installation and Operation Manual
for Perenio® Power Link Devices
Doc Version: 1.1.1 ©Perenio IoT spol s r.o. All rights reserved
Page 16 of 31
2.1.2 Selection of the Connection Method
There are two modes when activating the Power Plug in the Mobile Application:
ZigBee Mode that is used for activation in the Perenio Smart App through the
Control Gateway or the IoT Router, including further activation of this device in
Google Home and/or Yandex Smart Home applications;
Bluetooth (MFi) Mode that is used for activation in Apple HomeKit without the
Perenio® Control Gateway or the IoT Router.
When you first switch on the Power Link device, or did not activate it in the Perenio
Smart App through the Control Gateway or the IoT Router, the default mode will be
the Bluetooth (MFi) Mode.
However, after it is activated in the Perenio Smart App through the Control Gateway
or the IoT Router, the Power Link device will automatically switch to the ZigBee Mode
and will not be available for connection in the Apple HomeKit application.
The device may be switched from ZigBee Mode to Bluetooth (MFi) Mode in one of the
following ways:
1. Find the Power Plug in the Devices tab, click on the Settings icon ( ), and select
“Disconnect device”to remove it from the Perenio Smart App.
2. Press and hold the Power Button until the LED indicator starts flashing violet.
Release the button and wait for the indicator to flash blue.
2.1.3 Activation in the Perenio Smart Mobile Application
To connect the Power Link device through the Control Gateway or the IoT Router, the
User shall perform the following steps:
1. Unpack the device and plug it into the source of power (See par. 2.1.1).
2. Login in to the Perenio Smart Building Management System User Account
(See par. Abelow).
3. Activate the device in the application (See par. Bbelow).
4. Enter the desired Power Plug name and select the Room of installation.

Installation and Operation Manual
for Perenio® Power Link Devices
©Perenio IoT spol s r.o. All rights reserved Doc Version: 1.1.1
Page 17 of 31
A. LOGIN TO THE EXISTING USER ACCOUNT
a. Enter your e-mail address and password in the login
screen;
b. Click on the LOG IN button.
NOTE. If the password was lost, the User can restore it by
clicking on a corresponding link on the screen.
To restore a forgotten password, use the e-mail address
linked to your User Account, to which instructions on
changing the password will be sent.
B. CONNECTION TO THE CONTROL GATEWAY
a. Click on the “+” icon in the upper right corner of the
Devices tab, select “Add new device” and then the
“Power Plug” device in the list;
b. Select the Control Gateway/IoT Router to which the
Power Plug shall be connected (This screen will be
displayed, only if there are several Control Gateways
activated in the User Account);
NOTE. The Control Gateway/IoT Router must be connected
to the mains and the Internet, as well as activated in the
Perenio Smart App.
c. Start searching for devices;
d. Press and hold the reset button until the LED Indicator
starts blinking violet;
NOTE. Several sensors and other ZigBee devices may be
connected to the Control Gateway/IoT Router at once.
e. After successful connection, enter the Sensor’s name
and select the Room.

Installation and Operation Manual
for Perenio® Power Link Devices
Doc Version: 1.1.1 ©Perenio IoT spol s r.o. All rights reserved
Page 18 of 31
B.1. CONNECTION ERRORS
The connection failure of the device may occur due to one
of the following reasons:
a. The device is switched off or at a too long distance from
the Control Gateway (4.5 meters);
b. The Control Gateway is offline;
c. The LED Indicator was blinking before start of the sensor
connection (You should remove the sensor battery and
insert it back into the casing).
NOTE. To eliminate connection failures, follow instructions
specified on corresponding screens of the smartphone.
The entire process of the Power Link connection in the Mobile App is shown below.
1
2
3
4
5
6
7
8

Installation and Operation Manual
for Perenio® Power Link Devices
©Perenio IoT spol s r.o. All rights reserved Doc Version: 1.1.1
Page 19 of 31
9
10
11
12
Figure 5 –Add new device (Power Plug) procedure
2.1.4 Additional Settings
After activation of the Power Plug in the Perenio Smart
application, the User can also set power and voltage limits
and select the default state in the device control panel:
Power range: When set, power supply to the device
will be automatically blocked in the case when
minimum or maximum power levels are exceeded;
Voltage range: When set, power supply to the device
will be automatically blocked in the case when
minimum or maximum voltage levels are exceeded;
Default state: When set, the device will be
automatically switched to the last state, on or off state
every time after being restarted, unlocked or plugged
into the source of power.

Installation and Operation Manual
for Perenio® Power Link Devices
Doc Version: 1.1.1 ©Perenio IoT spol s r.o. All rights reserved
Page 20 of 31
2.1.5 Activation in Apple HomeKit
To manage the device in Home application (Apple HomeKit), the User shall switch it
to the Bluetooth Mode (See par. 2.1.2 above) and add it as an accessory by scanning
the QR Code contained on the back cover of the Quick Start Guide.
NOTE. When connecting, the User shall follow instructions in the Apple application.
2.1.6 Management Through Google Home/Yandex Smart Home
To control an intelligent outlet via the Google Home application or Yandex Smart
Home, it must be previously activated in the Perenio Smart application (see clause
2.1.3 above).
NOTE. When activating the Power Link in Google Home or Yandex Smart Home,
the User shall follow instructions specified in corresponding Google and Yandex
applications.
2.1.7 LED Indication of Loads and Overload Protection
The Power Link device may operate under power of up to 4,000 Watts. Changes in the
power level will be displayed in the mobile application, as well as indicated by different
colors of the Power Button LED.
Table below contains power levels and description thereof.
Table 3 –Permissible power limits
Power Range
Description
0W
No power, or the device is offline
1W to 1,000W
Low power level
1,001W to 3,000W
Medium power level
3,001W to 4,000W
High power level
Above 4,000W
Overpower protection triggering