Perfect Prime TH201 User manual

Temperature & Humidity
Smart Sensor TH201
Instruction Manual

..................................................... 2
.............................................. 2
.............................................. 3
.............................................. 4
................................................... 5
.............................................. 6
............................................... 7
................................................. 8
.............................................. 9
.............................................. 10
....................... 11
............................................. 12
1. INCLUDED
2. MAIN FUNCTION
3. SPECIFICATIONS
4. DOWNLOAD APP
5. ADD DEVICE
6. DEVICE SETTING
7. CHART DISPLAY
8. EXPORT DATA
9. UNIT SWITCHING
10. ACCESSORIES
11. HOW TO REPLACE THE BATTERY?
12. DECLARATION
CONTENTS
P. 1

1. INCLUDED
2. MAIN FUNCTION
P. 2
• Real-time monitoring temperature and humidity.
• Push notications when the temperature or humidity exceed the limits.
• Calibrate temperature and humidity.
• Chart graph display.
• Save and export data.
• Kinds of accessories for easily installation.
MAIN FUNCTION
INCLUDED
• Sensor x1
• Back clip x1
• Lanyard x1
• Bracket x1
• 3M tape x1

3. SPECIFICATIONS
P. 3
Battery
Standby current
Protocol
Wireless Range
Operating Temperature
Operating Humidity
Temperature Accuracy
Humidity Accuracy
Working Time
Wireless Type
Size
CR2477 3V 1000mAH
≤20uA
bluetooth5.0
50m(idea conditions)
-20°C 〜85°C (-4°F〜185°F)
0% 〜95%
(0°C - 60°C / 32°F - 140°F)
±0.3°C / ±0.5°F (typical)
0.5°C / ±0.9°F (max)
±2% (typical) ±5%(max)
About 12 months
2.4GHz
46mm x 46mm x 15mm

P. 4
4. DOWNLOAD APP
• Download “SensorPro” app from app store or google play.
SensorPro

5. ADD DEVICE
1. Remove the battery insulation sheet of the sensor.
2. Run “SensorPro” app on your smart phone.
3. Take the device close to your phone.
4. Click “+” to add device to app.
P. 5
Close to your phone

6. DEVICE SETTING
1. Click the device item on the gray area to go to device setting.
2. Click the camera icon to customize your scenes picture.
3. Click Delete button to remove the device.
P. 6

7. CHART DISPLAY
1. Click the data area on the device item to show the history data chart.
2. The App will automatically connect to the device to update data the
rst time you used. After updating the data for the rst time, the
historical data needs to be updated manually by clicking the refresh
button.
P. 7

8. EXPORT DATA
P. 8
1. The export button is at the bottom of the chart screen. Click
"EXPORT DATA AS CSV" to enter the export data screen.
2. Select the date you need to export data and click "EXPORT" to
export historical data.

9. UNIT SWITCHING
P. 9
1. Click to go App setting screen.
2. The temperature unit can be set as Fahrenheit(ºF) or Celsius (ºC).